am335x, guardian: update guardian board

  - add BOARD_LATE_INIT function calls in board.c
  - add swi_status detection in board.c
  - mux: add guardian interfaces to single pinmux structure
  - am33xx, kconfig: add BOARD_LATE_INIT for GUARDIAN board

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 7f6b344c82b1a74e9265730d64318b9cd6488885..39d9c2873be200a03ff80f08317319a7c7f141ef 100644 (file)
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -89,6 +89,7 @@ config TARGET_AM335X_SHC
 
 config TARGET_AM335X_GUARDIAN
        bool "Support am335x based guardian board from bosch"
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO

diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index ec0c4a17f635b0306a8f2c45efe014bc4b311cd0..072aa4ebb881946e635b891f8f517fbbf60e6491 100644 (file)
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -172,6 +172,8 @@ void sdram_init(void)
 
 int board_init(void)
 {
+       save_omap_boot_params();
+
 #if defined(CONFIG_HW_WATCHDOG)
        hw_watchdog_init();
 #endif
@@ -183,3 +185,54 @@ int board_init(void)
 #endif
        return 0;
 }
+
+#ifdef CONFIG_BOARD_LATE_INIT
+static void set_bootmode_env(void)
+{
+       char *boot_device_name = NULL;
+       char *boot_mode_gpio = "gpio@44e07000_14";
+       int   ret;
+       int   value;
+
+       struct gpio_desc boot_mode_desc;
+
+       switch (gd->arch.omap_boot_device) {
+       case BOOT_DEVICE_NAND:
+               boot_device_name = "nand";
+               break;
+       case BOOT_DEVICE_USBETH:
+               boot_device_name = "usbeth";
+               break;
+       default:
+               break;
+       }
+
+       if (boot_device_name)
+               env_set("boot_device", boot_device_name);
+
+       ret = dm_gpio_lookup_name(boot_mode_gpio, &boot_mode_desc);
+       if (ret) {
+               printf("%s is not found\n", boot_mode_gpio);
+               goto err;
+       }
+
+       ret = dm_gpio_request(&boot_mode_desc, "setup_bootmode_env");
+       if (ret && ret != -EBUSY) {
+               printf("requesting gpio: %s failed\n", boot_mode_gpio);
+               goto err;
+       }
+
+       value = dm_gpio_get_value(&boot_mode_desc);
+       value ? env_set("swi_status", "0") : env_set("swi_status", "1");
+       return;
+
+err:
+       env_set("swi_status", "err");
+}
+
+int board_late_init(void)
+{
+       set_bootmode_env();
+       return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */

diff --git a/board/bosch/guardian/mux.c b/board/bosch/guardian/mux.c
index 708c3e7fddba881e5e799aa7476f4a43ca370909..20a1f2522f019c15d70d3befff270028909bfccd 100644 (file)
--- a/board/bosch/guardian/mux.c
+++ b/board/bosch/guardian/mux.c
@@ -26,24 +26,16 @@ static struct module_pin_mux i2c0_pin_mux[] = {
        {-1},
 };
 
-static struct module_pin_mux adc_voltages_en[] = {
-       {OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUP_EN)},
-       {-1},
-};
-
-static struct module_pin_mux asp_power_en[] = {
-       {OFFSET(mcasp0_aclkx), (MODE(7) | PULLUP_EN)},
-       {-1},
-};
-
-static struct module_pin_mux switch_off_3v6_pin_mux[] = {
-       {OFFSET(mii1_txd0), (MODE(7) | PULLUP_EN)},
-       /*
-        * The uart1 lines are made floating inputs, based on the Guardian
-        * A2 Sample Power Supply Schematics
-        */
-       {OFFSET(uart1_rxd), (MODE(7) | PULLUDDIS)},
-       {OFFSET(uart1_txd), (MODE(7) | PULLUDDIS)},
+static struct module_pin_mux guardian_interfaces_pin_mux[] = {
+       {OFFSET(mcasp0_ahclkx), (MODE(7) | PULLDOWN_EN)},
+       {OFFSET(mcasp0_aclkx),  (MODE(7) | PULLUP_EN)},
+       {OFFSET(mii1_txd0),     (MODE(7) | PULLUP_EN)},
+       {OFFSET(uart1_rxd),     (MODE(7) | RXACTIVE | PULLUDDIS)},
+       {OFFSET(uart1_txd),     (MODE(7) | PULLUDDIS)},
+       {OFFSET(mii1_crs),      (MODE(7) | PULLDOWN_EN)},
+       {OFFSET(rmii1_refclk),  (MODE(7) | PULLDOWN_EN)},
+       {OFFSET(mii1_txd3),     (MODE(7) | PULLUDDIS)},
+       {OFFSET(mii1_rxdv),     (MODE(7) | PULLDOWN_EN)},
        {-1},
 };
 
@@ -93,7 +85,5 @@ void enable_board_pin_mux(void)
 #ifdef CONFIG_NAND
        configure_module_pin_mux(nand_pin_mux);
 #endif
-       configure_module_pin_mux(adc_voltages_en);
-       configure_module_pin_mux(asp_power_en);
-       configure_module_pin_mux(switch_off_3v6_pin_mux);
+       configure_module_pin_mux(guardian_interfaces_pin_mux);
 }