spl: mmc: Factor out eMMC boot partition selection code

Factor out eMMC boot partition selection code into
default_spl_mmc_emmc_boot_partition() function and implement
weak spl_mmc_emmc_boot_partition(), so that architecture or
board code can override the eMMC boot partition selection.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Harald Seiler <hws@denx.de>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index add2785b4e39d2bafb953b9757853ecc8f0caee6..2377d0937d1d731774deeab2fc04f73f35119a0e 100644 (file)
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -324,6 +324,29 @@ unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
        return raw_sect;
 }
 
+int default_spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+       int part;
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
+       part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
+#else
+       /*
+        * We need to check what the partition is configured to.
+        * 1 and 2 match up to boot0 / boot1 and 7 is user data
+        * which is the first physical partition (0).
+        */
+       part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+       if (part == 7)
+               part = 0;
+#endif
+       return part;
+}
+
+int __weak spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+       return default_spl_mmc_emmc_boot_partition(mmc);
+}
+
 int spl_mmc_load(struct spl_image_info *spl_image,
                 struct spl_boot_device *bootdev,
                 const char *filename,
@@ -355,19 +378,7 @@ int spl_mmc_load(struct spl_image_info *spl_image,
        err = -EINVAL;
        switch (boot_mode) {
        case MMCSD_MODE_EMMCBOOT:
-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
-               part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
-#else
-               /*
-                * We need to check what the partition is configured to.
-                * 1 and 2 match up to boot0 / boot1 and 7 is user data
-                * which is the first physical partition (0).
-                */
-               part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
-
-               if (part == 7)
-                       part = 0;
-#endif
+               part = spl_mmc_emmc_boot_partition(mmc);
 
                if (CONFIG_IS_ENABLED(MMC_TINY))
                        err = mmc_switch_part(mmc, part);

diff --git a/include/spl.h b/include/spl.h
index cee9a42ddb5e5dbda1ebe64b677e85671969a98a..c643943482d64293c79715ea06a7773b6f263274 100644 (file)
--- a/include/spl.h
+++ b/include/spl.h
@@ -357,6 +357,29 @@ u32 spl_mmc_boot_mode(const u32 boot_device);
  * If not overridden, it is weakly defined in common/spl/spl_mmc.c.
  */
 int spl_mmc_boot_partition(const u32 boot_device);
+
+struct mmc;
+/**
+ * default_spl_mmc_emmc_boot_partition() - eMMC boot partition to load U-Boot from.
+ * mmc:                        Pointer for the mmc device structure
+ *
+ * This function should return the eMMC boot partition number which
+ * the SPL should load U-Boot from (on the given boot_device).
+ */
+int default_spl_mmc_emmc_boot_partition(struct mmc *mmc);
+
+/**
+ * spl_mmc_emmc_boot_partition() - eMMC boot partition to load U-Boot from.
+ * mmc:                        Pointer for the mmc device structure
+ *
+ * This function should return the eMMC boot partition number which
+ * the SPL should load U-Boot from (on the given boot_device).
+ *
+ * If not overridden, it is weakly defined in common/spl/spl_mmc.c
+ * and calls default_spl_mmc_emmc_boot_partition();
+ */
+int spl_mmc_emmc_boot_partition(struct mmc *mmc);
+
 void spl_set_bd(void);
 
 /**