]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mach-snapdragon: Fix UART clock flow
authorRamon Fried <ramon.fried@gmail.com>
Wed, 16 May 2018 09:13:39 +0000 (12:13 +0300)
committerTom Rini <trini@konsulko.com>
Sat, 26 May 2018 22:19:11 +0000 (18:19 -0400)
UART clock enabling flow was wrong.
Changed the flow according to downstream implementation in LK.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
arch/arm/mach-snapdragon/clock-apq8016.c
arch/arm/mach-snapdragon/clock-apq8096.c
arch/arm/mach-snapdragon/clock-snapdragon.c
arch/arm/mach-snapdragon/clock-snapdragon.h
arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h

index 9c0cc1c22cca4958495a61a5eca47c83e4d98955..6e4a0ccb90a15158c72c0ae888c62cb7f47716e9 100644 (file)
@@ -17,7 +17,6 @@
 
 /* GPLL0 clock control registers */
 #define GPLL0_STATUS_ACTIVE BIT(17)
-#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
 
 static const struct bcr_regs sdc_regs[] = {
        {
@@ -36,11 +35,17 @@ static const struct bcr_regs sdc_regs[] = {
        }
 };
 
-static struct gpll0_ctrl gpll0_ctrl = {
+static struct pll_vote_clk gpll0_vote_clk = {
        .status = GPLL0_STATUS,
        .status_bit = GPLL0_STATUS_ACTIVE,
        .ena_vote = APCS_GPLL_ENA_VOTE,
-       .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+       .vote_bit = BIT(0),
+};
+
+static struct vote_clk gcc_blsp1_ahb_clk = {
+       .cbcr_reg = BLSP1_AHB_CBCR,
+       .ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
+       .vote_bit = BIT(10),
 };
 
 /* SDHCI */
@@ -55,7 +60,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
        /* 800Mhz/div, gpll0 */
        clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
                             CFG_CLK_SRC_GPLL0);
-       clk_enable_gpll0(priv->base, &gpll0_ctrl);
+       clk_enable_gpll0(priv->base, &gpll0_vote_clk);
        clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
 
        return rate;
@@ -72,12 +77,16 @@ static const struct bcr_regs uart2_regs = {
 /* UART: 115200 */
 static int clk_init_uart(struct msm_clk_priv *priv)
 {
-       /* Enable iface clk */
-       clk_enable_cbc(priv->base + BLSP1_AHB_CBCR);
+       /* Enable AHB clock */
+       clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk);
+
        /* 7372800 uart block clock @ GPLL0 */
        clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
                             CFG_CLK_SRC_GPLL0);
-       clk_enable_gpll0(priv->base, &gpll0_ctrl);
+
+       /* Vote for gpll0 clock */
+       clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+
        /* Enable core clk */
        clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
 
index 008649a4c6b0a98a97bc6be22299c253dc6d5eaa..628c38785b6e24fac7998975061646f524eb5a7c 100644 (file)
@@ -27,7 +27,7 @@ static const struct bcr_regs sdc_regs = {
        .D = SDCC2_D,
 };
 
-static const struct gpll0_ctrl gpll0_ctrl = {
+static const struct pll_vote_clk gpll0_vote_clk = {
        .status = GPLL0_STATUS,
        .status_bit = GPLL0_STATUS_ACTIVE,
        .ena_vote = APCS_GPLL_ENA_VOTE,
@@ -41,7 +41,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
        clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
        clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
                             CFG_CLK_SRC_GPLL0);
-       clk_enable_gpll0(priv->base, &gpll0_ctrl);
+       clk_enable_gpll0(priv->base, &gpll0_vote_clk);
        clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
 
        return rate;
index f738f57043c3b6e92f2489e64eabf7f82bbed255..85526186c609850df29523ce5fe57d593026bd70 100644 (file)
@@ -30,7 +30,7 @@ void clk_enable_cbc(phys_addr_t cbcr)
                ;
 }
 
-void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0)
 {
        if (readl(base + gpll0->status) & gpll0->status_bit)
                return; /* clock already enabled */
@@ -41,6 +41,21 @@ void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
                ;
 }
 
+#define BRANCH_ON_VAL (0)
+#define BRANCH_NOC_FSM_ON_VAL BIT(29)
+#define BRANCH_CHECK_MASK GENMASK(31, 28)
+
+void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk)
+{
+       u32 val;
+
+       setbits_le32(base + vclk->ena_vote, vclk->vote_bit);
+       do {
+               val = readl(base + vclk->cbcr_reg);
+               val &= BRANCH_CHECK_MASK;
+       } while ((val != BRANCH_ON_VAL) && (val != BRANCH_NOC_FSM_ON_VAL));
+}
+
 #define APPS_CMD_RGCR_UPDATE BIT(0)
 
 /* Update clock command via CMD_RGCR */
index 2cff4f8a06c279ad6369662d73232868b94ddc9e..58fab40a2e4530abba059ebc1f27e4f9ab0c5d34 100644 (file)
 #define CFG_CLK_SRC_GPLL0 (1 << 8)
 #define CFG_CLK_SRC_MASK  (7 << 8)
 
-struct gpll0_ctrl {
+struct pll_vote_clk {
        uintptr_t status;
        int status_bit;
        uintptr_t ena_vote;
        int vote_bit;
 };
 
+struct vote_clk {
+       uintptr_t cbcr_reg;
+       uintptr_t ena_vote;
+       int vote_bit;
+};
 struct bcr_regs {
        uintptr_t cfg_rcgr;
        uintptr_t cmd_rcgr;
@@ -30,9 +35,10 @@ struct msm_clk_priv {
        phys_addr_t base;
 };
 
-void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0);
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
 void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
 void clk_enable_cbc(phys_addr_t cbcr);
+void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk);
 void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
                          int div, int m, int n, int source);
 
index ae784387fa189afcfd963bea00d43899614d61d8..520e2e6bd7cf1880bb2df5c8fec216b13ee85168 100644 (file)
@@ -13,6 +13,7 @@
 /* Clocks: (from CLK_CTL_BASE)  */
 #define GPLL0_STATUS                   (0x2101C)
 #define APCS_GPLL_ENA_VOTE             (0x45000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
 
 #define SDCC_BCR(n)                    ((n * 0x1000) + 0x41000)
 #define SDCC_CMD_RCGR(n)               ((n * 0x1000) + 0x41004)