config ARC
bool "ARC architecture"
- select HAVE_PRIVATE_LIBGCC
- select SUPPORT_OF_CONTROL
select ARCH_EARLY_INIT_R
+ select ARC_TIMER
select CLK
+ select HAVE_PRIVATE_LIBGCC
+ select SUPPORT_OF_CONTROL
select TIMER
- select ARC_TIMER
config ARM
bool "ARM architecture"
config NIOS2
bool "Nios II architecture"
- select SUPPORT_OF_CONTROL
- select OF_CONTROL
- select DM
select CPU
+ select DM
+ select OF_CONTROL
+ select SUPPORT_OF_CONTROL
config PPC
bool "PowerPC architecture"
config SANDBOX
bool "Sandbox"
select BOARD_LATE_INIT
- select SUPPORT_OF_CONTROL
select DM
+ select DM_GPIO
+ select DM_I2C
select DM_KEYBOARD
- select DM_SPI_FLASH
+ select DM_MMC
select DM_SERIAL
- select DM_I2C
select DM_SPI
- select DM_GPIO
- select DM_MMC
+ select DM_SPI_FLASH
select HAVE_BLOCK_DEVICE
- select SPI
select LZO
+ select SPI
+ select SUPPORT_OF_CONTROL
imply CMD_GETTIME
imply CMD_HASH
imply CMD_IO
imply CMD_IOTRACE
imply CMD_LZMADEC
+ imply CMD_SATA
+ imply CMD_SF_TEST
imply CRC32_VERIFY
imply FAT_WRITE
imply HASH_VERIFY
imply LZMA
imply SCSI
- imply CMD_SATA
- imply CMD_SF_TEST
config SH
bool "SuperH architecture"
config X86
bool "x86 architecture"
select CREATE_ARCH_SYMLINK
- select HAVE_PRIVATE_LIBGCC
- select USE_PRIVATE_LIBGCC
- select SUPPORT_OF_CONTROL
- select OF_CONTROL
select DM
select DM_PCI
+ select HAVE_PRIVATE_LIBGCC
+ select OF_CONTROL
select PCI
+ select SUPPORT_OF_CONTROL
select TIMER
+ select USE_PRIVATE_LIBGCC
select X86_TSC_TIMER
imply BLK
+ imply CMD_FPGA_LOADMK
+ imply CMD_GETTIME
+ imply CMD_IO
+ imply CMD_IRQ
+ imply CMD_PCI
+ imply CMD_SF_TEST
+ imply CMD_ZBOOT
imply DM_ETH
imply DM_GPIO
imply DM_KEYBOARD
imply DM_MMC
imply DM_RTC
- imply DM_SERIAL
imply DM_SCSI
+ imply DM_SERIAL
imply DM_SPI
imply DM_SPI_FLASH
imply DM_USB
imply DM_VIDEO
imply SYSRESET
imply SYSRESET_X86
- imply CMD_FPGA_LOADMK
- imply CMD_GETTIME
- imply CMD_IO
- imply CMD_IRQ
- imply CMD_PCI
- imply CMD_SF_TEST
- imply CMD_ZBOOT
- imply USB_HOST_ETHER
imply USB_ETHER_ASIX
imply USB_ETHER_SMSC95XX
+ imply USB_HOST_ETHER
config XTENSA
bool "Xtensa architecture"
config CPU_V7A
bool
- select HAS_VBAR
select HAS_THUMB2
+ select HAS_VBAR
select SYS_CACHE_SHIFT_6
imply SYS_ARM_MMU
config CPU_V7M
bool
select HAS_THUMB2
- select THUMB2_KERNEL
- select SYS_CACHE_SHIFT_5
select SYS_ARM_MPU
+ select SYS_CACHE_SHIFT_5
select SYS_THUMB_BUILD
+ select THUMB2_KERNEL
config CPU_V7R
bool
select HAS_THUMB2
- select SYS_CACHE_SHIFT_6
- select SYS_ARM_MPU
select SYS_ARM_CACHE_CP15
+ select SYS_ARM_MPU
+ select SYS_CACHE_SHIFT_6
config CPU_PXA
bool
config KIRKWOOD
bool "Marvell Kirkwood"
- select CPU_ARM926EJS
- select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
+ select CPU_ARM926EJS
config ARCH_MVEBU
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
- select OF_CONTROL
- select OF_SEPARATE
select DM
select DM_ETH
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select OF_CONTROL
+ select OF_SEPARATE
select SPI
config TARGET_DEVKIT3250
config TARGET_SPEAR300
bool "Support spear300"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES
config TARGET_SPEAR310
bool "Support spear310"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES
config TARGET_SPEAR320
bool "Support spear320"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES
config TARGET_SPEAR600
bool "Support spear600"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES
config TARGET_STV0991
bool "Support stv0991"
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select PL01X_SERIAL
select SPI
select SPI_FLASH
- select PL01X_SERIAL
config TARGET_X600
bool "Support x600"
select BOARD_LATE_INIT
select CPU_ARM926EJS
- select SUPPORT_SPL
select PL011_SERIAL
+ select SUPPORT_SPL
config TARGET_WOODBURN
bool "Support woodburn"
config ARCH_BCM283X
bool "Broadcom BCM283X family"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OF_CONTROL
select PL01X_SERIAL
select SERIAL_SEARCH_ALL
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7A
- imply CRC32_VERIFY
+ imply BCM_SF2_ETH
+ imply BCM_SF2_ETH_GMAC
imply CMD_HASH
+ imply CRC32_VERIFY
imply FAT_WRITE
imply HASH_VERIFY
imply NETDEVICES
- imply BCM_SF2_ETH
- imply BCM_SF2_ETH_GMAC
config TARGET_BCMNSP
bool "Support bcmnsp"
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
+ select DM_GPIO
select DM_I2C
- select DM_SPI_FLASH
+ select DM_KEYBOARD
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_KEYBOARD
+ select DM_SPI_FLASH
select SPI
imply FAT_WRITE
bool "Samsung S5PC1XX"
select CPU_V7A
select DM
- select DM_SERIAL
select DM_GPIO
select DM_I2C
+ select DM_SERIAL
config ARCH_HIGHBANK
bool "Calxeda Highbank"
config ARCH_KEYSTONE
bool "TI Keystone"
+ select CMD_POWEROFF
select CPU_V7A
select SUPPORT_SPL
- select SYS_THUMB_BUILD
- select CMD_POWEROFF
select SYS_ARCH_TIMER
+ select SYS_THUMB_BUILD
imply CMD_MTDPARTS
- imply FIT
imply CMD_SAVES
+ imply FIT
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
config ARCH_MX7
bool "Freescale MX7"
+ select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
select CPU_V7A
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
- select BOARD_EARLY_INIT_F
- select ARCH_MISC_INIT
imply MXC_GPIO
config ARCH_MX6
config ARCH_MX5
bool "Freescale MX5"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
imply MXC_GPIO
config ARCH_OWL
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
+ select BOARD_EARLY_INIT_F
select DM
select DM_SERIAL
- select BOARD_EARLY_INIT_F
imply FAT_WRITE
imply SYS_THUMB_BUILD
select DM
select DM_GPIO
select DM_SERIAL
- select SPMI
+ select MSM_SMEM
select OF_CONTROL
select OF_SEPARATE
select SMEM
- select MSM_SMEM
+ select SPMI
config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
+ select ARM64 if TARGET_SOCFPGA_STRATIX10
select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select DM
select DM_SERIAL
select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select OF_CONTROL
select SPL_DM_RESET if DM_RESET
+ select SPL_DM_SERIAL
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBDISK_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_MMC_SUPPORT if DM_MMC
select SPL_NAND_SUPPORT if SPL_NAND_DENALI
select SPL_OF_CONTROL
+ select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
select SPL_SERIAL_SUPPORT
- select SPL_DM_SERIAL
select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
select SPL_SPI_SUPPORT if DM_SPI
select SPL_WATCHDOG_SUPPORT
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
select SYS_NS16550
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
- select ARM64 if TARGET_SOCFPGA_STRATIX10
imply CMD_MTDPARTS
imply CRC32_VERIFY
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
- select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select SPECIFY_CONSOLE_INDEX
select SPL_STACK_R if SPL
select SPL_SYS_MALLOC_SIMPLE if SPL
- select SYS_NS16550
select SPL_SYS_THUMB_BUILD if !ARM64
+ select SYS_NS16550
select SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
- select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
+ select USB_STORAGE if DISTRO_DEFAULTS
select USE_TINY_PRINTF
imply CMD_GPT
imply DISTRO_DEFAULTS
config ARCH_ZYNQ
bool "Xilinx Zynq based platform"
+ select BOARD_EARLY_INIT_F if WDT
select BOARD_LATE_INIT
+ select CLK
+ select CLK_ZYNQ
select CPU_V7A
- select SUPPORT_SPL
- select OF_CONTROL
- select SPL_BOARD_INIT if SPL
- select BOARD_EARLY_INIT_F if WDT
- select SPL_OF_CONTROL if SPL
select DM
select DM_ETH if NET
- select SPL_DM if SPL
select DM_MMC if MMC
- select DM_SPI
select DM_SERIAL
+ select DM_SPI
select DM_SPI_FLASH
- select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
- select CLK
- select SPL_CLK if SPL
- select CLK_ZYNQ
+ select OF_CONTROL
select SPI
+ select SPL_BOARD_INIT if SPL
+ select SPL_CLK if SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
+ imply ARCH_EARLY_INIT_R
imply CMD_CLK
- imply FAT_WRITE
imply CMD_SPL
- imply ARCH_EARLY_INIT_R
+ imply FAT_WRITE
config ARCH_ZYNQMP_R5
bool "Xilinx ZynqMP R5 based platform"
+ select CLK
select CPU_V7R
- select OF_CONTROL
select DM
select DM_SERIAL
- select CLK
+ select OF_CONTROL
config ARCH_ZYNQMP
bool "Xilinx ZynqMP based platform"
select ARM64
select BOARD_LATE_INIT
+ select CLK
select DM
- select OF_CONTROL
select DM_SERIAL
- select SUPPORT_SPL
- select CLK
+ select DM_USB if USB
+ select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
- select DM_USB if USB
+ select SUPPORT_SPL
imply FAT_WRITE
config TEGRA
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
- select SEMIHOSTING
select PL01X_SERIAL
+ select SEMIHOSTING
config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
help
Support for Freescale LS2080A_EMU platform
The LS2080A Development System (EMULATOR) is a pre silicon
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
help
Support for Freescale LS2080A_SIMU platform
The LS2080A Development System (QDS) is a pre silicon
config TARGET_LS1088AQDS
bool "Support ls1088aqds"
select ARCH_LS1088A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
select BOARD_LATE_INIT
select SUPPORT_SPL
help
config TARGET_LS2080AQDS
bool "Support ls2080aqds"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
imply SCSI
imply SCSI_AHCI
help
config TARGET_LS2080ARDB
bool "Support ls2080ardb"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
imply SCSI
imply SCSI_AHCI
help
config TARGET_LS2081ARDB
bool "Support ls2081ardb"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
help
Support for Freescale LS2081ARDB platform.
The LS2081A Reference design board (RDB) is a high-performance
bool "Support Poplar 96boards Enterprise Edition Platform"
select ARM64
select DM
- select OF_CONTROL
select DM_SERIAL
select DM_USB
+ select OF_CONTROL
select PL01X_SERIAL
help
Support for Poplar 96boards EE platform. It features a HI3798cv200
config TARGET_LS1012AFRWY
bool "Support ls1012afrwy"
select ARCH_LS1012A
- select BOARD_LATE_INIT
select ARM64
+ select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
help
config TARGET_LS1088ARDB
bool "Support ls1088ardb"
select ARCH_LS1088A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
select BOARD_LATE_INIT
select SUPPORT_SPL
help
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
+ select SUPPORT_SPL
select SYS_FSL_DDR
- select BOARD_EARLY_INIT_F
imply SCSI
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
imply SCSI
help
Support for Freescale LS1021AIOT platform.
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043AQDS platform.
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043ARDB platform.
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI
help
Support for Freescale LS1046AQDS platform.
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI
help
Support for Freescale LS1046ARDB platform.
config ARCH_STI
bool "Support STMicrolectronics SoCs"
+ select BLK
select CPU_V7A
select DM
- select DM_SERIAL
- select BLK
select DM_MMC
select DM_RESET
+ select DM_SERIAL
help
Support for STMicroelectronics STiH407/10 SoC family.
This SoC is used on Linaro 96Board STiH410-B2260
select DM_GPIO
select DM_RESET
select DM_SERIAL
+ select MISC
select OF_CONTROL
select OF_LIBFDT
- select MISC
select PINCTRL
select REGMAP
select SUPPORT_SPL
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
- select OF_CONTROL
select BLK
select DM
- select SPL_DM if SPL
- select SYS_MALLOC_F
- select SYS_THUMB_BUILD if !ARM64
- select SPL_SYS_MALLOC_SIMPLE if SPL
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_PWM
+ select DM_REGULATOR
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select DM_USB if USB
- select DM_PWM
- select DM_REGULATOR
select ENABLE_ARM_SOC_BOOT0_HOOK
+ select OF_CONTROL
select SPI
+ select SPL_DM if SPL
+ select SPL_SYS_MALLOC_SIMPLE if SPL
+ select SYS_MALLOC_F
+ select SYS_THUMB_BUILD if !ARM64
+ imply ADC
imply DISTRO_DEFAULTS
imply FAT_WRITE
- imply USB_FUNCTION_FASTBOOT
- imply SPL_SYSRESET
- imply TPL_SYSRESET
- imply ADC
imply SARADC_ROCKCHIP
+ imply SPL_SYSRESET
imply SYS_NS16550
+ imply TPL_SYSRESET
+ imply USB_FUNCTION_FASTBOOT
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
select ARM64
select OF_CONTROL
- select SYS_CACHE_SHIFT_7
select PL01X_SERIAL
+ select SYS_CACHE_SHIFT_7
config ARCH_ASPEED
bool "Support Aspeed SoCs"
- select OF_CONTROL
select DM
+ select OF_CONTROL
endchoice
bool "Support snapper9260"
select AT91SAM9260
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_GURNARD
bool "Support gurnard"
select AT91SAM9G45
select BOARD_LATE_INIT
select DM
+ select DM_ETH
+ select DM_GPIO
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_ETH
select SPI
config TARGET_AT91SAM9261EK
config TARGET_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK board"
select AT91SAM9M10G45
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
config TARGET_PM9G45
bool "Ronetix pm9g45 board"
config TARGET_AT91SAM9N12EK
bool "Atmel AT91SAM9N12-EK board"
select AT91SAM9N12
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
config TARGET_AT91SAM9RLEK
bool "Atmel at91sam9rl reference board"
config TARGET_AT91SAM9X5EK
bool "Atmel AT91SAM9X5-EK board"
select AT91SAM9X5
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SUPPORT_SPL
config TARGET_SAMA5D2_PTC_EK
bool "SAMA5D2 PTC EK board"
- select SAMA5D2
select BOARD_EARLY_INIT_F
+ select SAMA5D2
config TARGET_SAMA5D2_XPLAINED
bool "SAMA5D2 Xplained board"
- select SAMA5D2
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D2
+ select SUPPORT_SPL
config TARGET_SAMA5D27_SOM1_EK
bool "SAMA5D27 SOM1 EK board"
- select CPU_V7A
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select CPU_V7A
+ select SUPPORT_SPL
help
The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package),
a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
config TARGET_SAMA5D3_XPLAINED
bool "SAMA5D3 Xplained board"
+ select BOARD_EARLY_INIT_F
select SAMA5D3
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
config TARGET_SAMA5D3XEK
bool "SAMA5D3X-EK board"
- select SAMA5D3
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D3
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
config TARGET_SAMA5D4_XPLAINED
bool "SAMA5D4 Xplained board"
- select SAMA5D4
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D4
+ select SUPPORT_SPL
config TARGET_SAMA5D4EK
bool "SAMA5D4 Evaluation Kit"
- select SAMA5D4
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D4
+ select SUPPORT_SPL
config TARGET_MEESC
bool "Support meesc"
config TARGET_CORVUS
bool "Support corvus"
select AT91SAM9M10G45
- select SUPPORT_SPL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
+ select DM_GPIO
+ select DM_SERIAL
+ select SUPPORT_SPL
config TARGET_TAURUS
bool "Support taurus"
select AT91SAM9G20
- select SUPPORT_SPL
select DM
+ select DM_ETH
+ select DM_GPIO
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_ETH
select SPI
+ select SUPPORT_SPL
config TARGET_SMARTWEB
bool "Support smartweb"
select AT91SAM9260
- select SUPPORT_SPL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
+ select DM_GPIO
+ select DM_SERIAL
+ select SUPPORT_SPL
config TARGET_VINCO
bool "Support VINCO"
- select SAMA5D4
- select SUPPORT_SPL
select DM
select DM_SPI
+ select SAMA5D4
select SPI
+ select SUPPORT_SPL
config TARGET_WB45N
bool "Support Laird WB45N"
config TARGET_WB50N
bool "Support Laird WB50N"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
endchoice
if ARCH_MX5
config MX5
- select GPT_TIMER
bool
default y
+ select GPT_TIMER
config MX51
bool
- select SYS_FSL_ERRATUM_ESDHC_A001
select ARM_CORTEX_A8_CVE_2017_5715
+ select SYS_FSL_ERRATUM_ESDHC_A001
config MX53
bool
config TARGET_KP_IMX53
bool "Support K+P imx53 board"
select BOARD_LATE_INIT
- select MX53
select DM
- select DM_SERIAL
select DM_ETH
- select DM_I2C
select DM_GPIO
+ select DM_I2C
select DM_PMIC
+ select DM_SERIAL
+ select MX53
config TARGET_MX51EVK
bool "Support mx51evk"
config TARGET_MX53CX9020
bool "Support CX9020"
select BOARD_LATE_INIT
- select MX53
select DM
select DM_SERIAL
+ select MX53
config TARGET_MX53EVK
bool "Support mx53evk"
if ARCH_MX6
config MX6_SMP
+ bool
select ARM_ERRATA_751472
select ARM_ERRATA_761320
select ARM_ERRATA_794072
select ARM_ERRATA_845369
select MP
- bool
config MX6
- select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
- select GPT_TIMER if !MX6UL && !MX6ULL
bool
default y
+ select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
+ select GPT_TIMER if !MX6UL && !MX6ULL
imply CMD_FUSE
config MX6D
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6DL
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6Q
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6QDL
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6S
- select HAS_CAAM
bool
+ select HAS_CAAM
config MX6SL
bool
config MX6SX
+ bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
- bool
config MX6SLL
- select ROM_UNIFIED_SECTIONS
bool
+ select ROM_UNIFIED_SECTIONS
config MX6UL
+ bool
select HAS_CAAM
- select SYS_L2CACHE_OFF
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF
config MX6UL_LITESOM
bool
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
config MX6UL_OPOS6UL
bool
- select MX6UL
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
config MX6ULL
- select SYS_L2CACHE_OFF
+ bool
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL
imply CMD_SATA
config TARGET_ARISTAINETOS
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
- select MX6QDL
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
config TARGET_CM_FX6
bool "CM-FX6"
- select SUPPORT_SPL
- select MX6QDL
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ select MX6QDL
+ select SUPPORT_SPL
config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL
config TARGET_COLIBRI_IMX6ULL
bool "Toradex Colibri iMX6ULL"
config TARGET_DHCOMIMX6
bool "dh_imx6"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
imply CMD_SPL
config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
- select SUPPORT_SPL
select DM
select DM_SERIAL
+ select SUPPORT_SPL
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_MX6LOGICPD
config TARGET_MX6DL_MAMOJ
bool "Support BTicino Mamoj"
- select MX6QDL
- select OF_CONTROL
- select PINCTRL
select DM
select DM_ETH
select DM_GPIO
select DM_PMIC
select DM_PMIC_PFUZE100
select DM_THERMAL
+ select MX6QDL
+ select OF_CONTROL
+ select PINCTRL
select SPL
- select SUPPORT_SPL
select SPL_DM if SPL
- select SPL_OF_LIBFDT if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_PINCTRL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_GPIO_SUPPORT if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC_SUPPORT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_OF_LIBFDT if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
- select SPL_USB_HOST_SUPPORT if SPL
select SPL_USB_GADGET_SUPPORT if SPL
+ select SPL_USB_HOST_SUPPORT if SPL
select SPL_USB_SDP_SUPPORT if SPL
select SPL_WATCHDOG_SUPPORT if SPL
+ select SUPPORT_SPL
config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6QDL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
+ select SPL_OF_LIBFDT
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL
config TARGET_MX6SABRESD
bool "mx6sabresd"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL
config TARGET_MX6SLEVK
bool "mx6slevk"
config TARGET_MX6SLLEVK
bool "mx6sll evk"
select BOARD_LATE_INIT
- select MX6SLL
select DM
select DM_THERMAL
+ select MX6SLL
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select MX6SX
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6SX
+ select SUPPORT_SPL
config TARGET_MX6SXSABREAUTO
bool "mx6sxsabreauto"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select MX6SX
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6SX
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
config TARGET_MX6UL_14X14_EVK
- select BOARD_LATE_INIT
bool "mx6ul_14x14_evk"
- select MX6UL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
config TARGET_MX6UL_ENGICAM
bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
select BOARD_LATE_INIT
- select MX6ULL
select DM
select DM_THERMAL
+ select MX6ULL
config TARGET_NITROGEN6X
bool "nitrogen6x"
- imply USB_HOST_ETHER
imply USB_ETHER_ASIX
- imply USB_ETHER_SMSC95XX
imply USB_ETHER_MCS7830
+ imply USB_ETHER_SMSC95XX
+ imply USB_HOST_ETHER
config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
config TARGET_PFLA02
bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_SECOMX6
config TARGET_KP_IMX6Q_TPC
bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
imply CMD_SPL
config TARGET_TQMA6
config TARGET_UDOO
bool "udoo"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_UDOO_NEO
bool "UDOO Neo"
select BOARD_LATE_INIT
- select SUPPORT_SPL
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX
+ select SUPPORT_SPL
config TARGET_SAMTEC_VINING_2000
bool "samtec VIN|ING 2000"
select BOARD_LATE_INIT
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX
config TARGET_WANDBOARD
bool "wandboard"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
- select MX6SL
select BOARD_LATE_INIT
+ select MX6SL
config TARGET_XPRESS
bool "CCV xPress"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
config TARGET_ZC5202
bool "zc5202"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL
config TARGET_ZC5601
bool "zc5601"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL
endchoice
config MX7
bool
+ default y
+ select ARCH_SUPPORT_PSCI
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- select CPU_V7_HAS_VIRT
- select CPU_V7_HAS_NONSEC
- select ARCH_SUPPORT_PSCI
imply CMD_FUSE
- default y
config MX7D
+ bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
imply CMD_FUSE
- bool
choice
prompt "MX7 board select"
config TARGET_CL_SOM_IMX7
bool "CL-SOM-iMX7"
- select MX7D
select DM
select DM_THERMAL
+ select MX7D
select SUPPORT_SPL
config TARGET_MX7DSABRESD
bool "mx7dsabresd"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D
config TARGET_PICO_IMX7D
bool "pico-imx7d"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D
select SUPPORT_SPL
config TARGET_WARP7
bool "warp7"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D
config TARGET_COLIBRI_IMX7
bool "Support Colibri iMX7S/iMX7D modules"
bool "Support am335x_evm"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select TI_I2C_BOARD_DETECT
+ imply SPL_DM
+ imply SPL_DM_SEQ_ALIAS
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
+ imply SPL_OF_LIBFDT
imply SPL_POWER_SUPPORT
+ imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
+ imply SPL_SYS_MALLOC_SIMPLE
imply SPL_WATCHDOG_SUPPORT
imply SPL_YMODEM_SUPPORT
- imply SPL_SYS_MALLOC_SIMPLE
- imply SPL_SEPARATE_BSS
- imply SPL_DM
- imply SPL_DM_SEQ_ALIAS
- imply SPL_OF_LIBFDT
help
This option specifies support for the AM335x
GP and HS EVM development platforms. The AM335x
bool "Support am335x_baltos"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_AM335X_IGEP003X
bool "Support am335x_igep003x"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_AM335X_SHC
bool "Support am335x based shc board from bosch"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
imply CMD_SPL
config TARGET_AM335X_SL50
bool "Support am335x_sl50"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_BAV335X
bool "Support bav335x"
config TARGET_CM_T335
bool "Support cm_t335"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_ETAMIN
bool "Support etamin"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_PCM051
bool "Support pcm051"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_PENGWYN
bool "Support pengwyn"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_PEPPER
bool "Support pepper"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_PXM2
bool "Support pxm2"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_RASTABAN
bool "Support rastaban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_RUT
bool "Support rut"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_THUBAN
bool "Support thuban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_PDU001
bool "Support PDU001"
if AM43XX || AM33XX
config ISW_ENTRY_ADDR
hex "Address in memory or XIP flash of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
help
After any reset, the boot ROM on the AM43XX SOC
searches the boot media for a valid boot image.
point address depending on the device type
(secure/non-secure), boot media (xip/non-xip) and
image headers.
- default 0x402F4000 if AM43XX
- default 0x402F0400 if AM33XX
config PUB_ROM_DATA_SIZE
hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
+ default 0x8400
help
During the device boot, the public ROM uses the top of
the public L3 OCMC RAM to store r/w data like stack,
boot image. Once the ROM transfers control to the boot
image, this area is no longer used, and can be reclaimed
for run time use by the boot image.
- default 0x8400
endif
config TARGET_AM3517_EVM
bool "AM3517 EVM"
select DM
- select DM_SERIAL
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_SERIAL
config TARGET_MT_VENTOUX
bool "TeeJet Mt.Ventoux"
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_5
select OMAP3_GPIO_6
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_OMAP3_EVM
bool "TI OMAP3 EVM"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
config TARGET_OMAP3_IGEP00X0
bool "IGEP"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_5
select OMAP3_GPIO_6
config TARGET_OMAP3_OVERO
bool "OMAP35xx Gumstix Overo"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_AM3517_CRANE
bool "am3517_crane"
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_6
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
config TARGET_SNIPER
bool "LG Optimus Black"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
bool "Gose board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_KOELSCH
bool "Koelsch board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_LAGER
bool "Lager board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_KZM9G
bool "KZM9D board"
bool "Alt board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_SILK
bool "Silk board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_PORTER
bool "Porter board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
config TARGET_STOUT
bool "Stout board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET
endchoice
config TEGRA_COMMON
bool "Tegra common options"
+ select BINMAN
+ select BOARD_EARLY_INIT_F
select CLK
select DM
select DM_ETH
select DM_SPI
select DM_SPI_FLASH
select MISC
- select SPI
select OF_CONTROL
+ select SPI
select VIDCONSOLE_AS_LCD if DM_VIDEO
- select BOARD_EARLY_INIT_F
- select BINMAN
imply CRC32_VERIFY
config TEGRA_NO_BPMP
config TEGRA210
bool "Tegra210 family"
- select TEGRA_GPIO
select TEGRA_ARMV8_COMMON
+ select TEGRA_GPIO
select TEGRA_NO_BPMP
config TEGRA186
config TARGET_MICROBLAZE_GENERIC
bool "Support microblaze-generic"
select BOARD_LATE_INIT
- select SUPPORT_SPL
- select OF_CONTROL
select DM
select DM_SERIAL
+ select OF_CONTROL
+ select SUPPORT_SPL
select SYSRESET
endchoice
config TARGET_QEMU_MIPS
bool "Support qemu-mips"
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN
config TARGET_MALTA
bool "Support malta"
select DM_SERIAL
select DYNAMIC_IO_PORT_BASE
select MIPS_CM
+ select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_CONTROL
select OF_ISA_BUS
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
+ select SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
- select MIPS_L1_CACHE_SHIFT_6
- select ROM_EXCEPTION_VECTORS
config TARGET_VCT
bool "Support vct"
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
config TARGET_DBAU1X00
bool "Support dbau1x00"
+ select MIPS_TUNE_4KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC
config TARGET_PB1X00
bool "Support pb1x00"
- select SUPPORTS_LITTLE_ENDIAN
+ select MIPS_TUNE_4KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC
config ARCH_ATH79
bool "Support QCA/Atheros ath79"
- select OF_CONTROL
select DM
+ select OF_CONTROL
config ARCH_BMIPS
bool "Support BMIPS SoCs"
- select OF_CONTROL
- select DM
select CLK
select CPU
+ select DM
+ select OF_CONTROL
select RAM
select SYSRESET
config MACH_PIC32
bool "Support Microchip PIC32"
- select OF_CONTROL
select DM
+ select OF_CONTROL
config TARGET_BOSTON
bool "Support Boston"
select DM
select DM_SERIAL
- select OF_CONTROL
select MIPS_CM
select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_BOARD_SETUP
+ select OF_CONTROL
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN
config TARGET_XILFPGA
bool "Support Imagination Xilfpga"
- select OF_CONTROL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
- select SUPPORTS_LITTLE_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
+ select DM_GPIO
+ select DM_SERIAL
select MIPS_L1_CACHE_SHIFT_4
+ select OF_CONTROL
select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
help
This supports IMGTEC MIPSfpga platform
config TARGET_MPC8313ERDB
bool "Support MPC8313ERDB"
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
config TARGET_MPC8315ERDB
bool "Support MPC8315ERDB"
config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
+ select BOARD_EARLY_INIT_F
select SYS_FSL_DDR
- select SYS_FSL_HAS_DDR2
select SYS_FSL_DDR_BE
- select BOARD_EARLY_INIT_F
+ select SYS_FSL_HAS_DDR2
config TARGET_MPC8349ITX
bool "Support MPC8349ITX"
config CMD_CONFIG
bool "config"
- select BUILD_BIN2C
default SANDBOX
+ select BUILD_BIN2C
help
Print ".config" contents.
config CMD_CRC32
bool "crc32"
- select HASH
default y
+ select HASH
help
Compute CRC32.
config CMD_GPT
bool "GPT (GUID Partition Table) command"
- select PARTITION_UUIDS
select EFI_PARTITION
select HAVE_BLOCK_DEVICE
+ select PARTITION_UUIDS
imply RANDOM_UUID
help
Enable the 'gpt' command to ready and write GPT style partition
config CMD_PART
bool "part"
- select PARTITION_UUIDS
select HAVE_BLOCK_DEVICE
+ select PARTITION_UUIDS
help
Read and display information about the partition table on
various media.
config CMD_UBI
tristate "Enable UBI - Unsorted block images commands"
+ default y if NAND_SUNXI
+ select CMD_MTDPARTS
select CRC32
select MTD_UBI
- select CMD_MTDPARTS
- default y if NAND_SUNXI
help
UBI is a software layer above MTD layer which admits use of LVM-like
logical volumes on top of MTD devices, hides some complexities of
config CMD_UBIFS
tristate "Enable UBIFS - Unsorted block images filesystem commands"
depends on CMD_UBI
+ default y if CMD_UBI
select CRC32
select LZO
- default y if CMD_UBI
help
UBIFS is a file system for flash devices which works on top of UBI.
projects / u-boot.git / commitdiff