pinctr: qcom: sm8250: add special pins pins configuration data

Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8250 SoC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>

diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250.c b/drivers/pinctrl/qcom/pinctrl-sm8250.c
index dac24f11bc2c78c7964b22b60ba077f969eddc3d..cab42fa64ed2eeda7259b0f6065bae8779d06d34 100644 (file)
--- a/drivers/pinctrl/qcom/pinctrl-sm8250.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250.c
@@ -18,8 +18,37 @@
 static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
 
 static const struct pinctrl_function msm_pinctrl_functions[] = { { "qup12", 1 },
-                                                                { "gpio", 0 },
-                                                                { "sdc2_clk", 0 } };
+                                                                { "gpio", 0 }, };
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)          \
+       {                                               \
+               .name = pg_name,                        \
+               .ctl_reg = ctl,                         \
+               .io_reg = 0,                            \
+               .pull_bit = pull,                       \
+               .drv_bit = drv,                         \
+               .oe_bit = -1,                           \
+               .in_bit = -1,                           \
+               .out_bit = -1,                          \
+       }
+
+#define UFS_RESET(pg_name, offset)                     \
+       {                                               \
+               .name = pg_name,                        \
+               .ctl_reg = offset,                      \
+               .io_reg = offset + 0x4,                 \
+               .pull_bit = 3,                          \
+               .drv_bit = 0,                           \
+               .oe_bit = -1,                           \
+               .in_bit = -1,                           \
+               .out_bit = 0,                           \
+       }
+
+static const struct msm_special_pin_data sm8250_special_pins_data[] = {
+       [0] = UFS_RESET("ufs_reset", SOUTH + 0xb8000),
+       [1] = SDC_PINGROUP("sdc2_clk", NORTH + 0xb7000, 14, 6),
+       [2] = SDC_PINGROUP("sdc2_cmd", NORTH + 0xb7000, 11, 3),
+       [3] = SDC_PINGROUP("sdc2_data", NORTH + 0xb7000, 9, 0),
+};
 
 static const unsigned int sm8250_pin_offsets[] = {
        [0] = SOUTH,   [1] = SOUTH,   [2] = SOUTH,   [3] = SOUTH,   [4] = NORTH,   [5] = NORTH,
@@ -52,7 +81,6 @@ static const unsigned int sm8250_pin_offsets[] = {
        [162] = WEST,  [163] = WEST,  [164] = WEST,  [165] = WEST,  [166] = WEST,  [167] = WEST,
        [168] = WEST,  [169] = WEST,  [170] = WEST,  [171] = WEST,  [172] = WEST,  [173] = WEST,
        [174] = WEST,  [175] = WEST,  [176] = WEST,  [177] = WEST,  [178] = WEST,  [179] = WEST,
-       [180] = 0,     [181] = 0,     [182] = 0,     [183] = 0,
 };
 
 static const char *sm8250_get_function_name(struct udevice *dev, unsigned int selector)
@@ -62,7 +90,12 @@ static const char *sm8250_get_function_name(struct udevice *dev, unsigned int se
 
 static const char *sm8250_get_pin_name(struct udevice *dev, unsigned int selector)
 {
-       snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
+       if (selector >= 180 && selector <= 183)
+               snprintf(pin_name, MAX_PIN_NAME_LEN,
+                        sm8250_special_pins_data[selector - 180].name);
+       else
+               snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
+
        return pin_name;
 }
 
@@ -76,6 +109,7 @@ static struct msm_pinctrl_data sm8250_data = {
                .pin_offsets = sm8250_pin_offsets,
                .pin_count = ARRAY_SIZE(sm8250_pin_offsets),
                .special_pins_start = 180,
+               .special_pins_data = sm8250_special_pins_data,
        },
        .functions_count = ARRAY_SIZE(msm_pinctrl_functions),
        .get_function_name = sm8250_get_function_name,