colibri_imx6: remove legacy sdboot wrapper

Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 69bf8225fe53a4c16bbe8860a80a1a9a86d6ae33..1f2b89e72257631bfc1b6859898f40fdb23a1a18 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -148,23 +148,6 @@
        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
-#define SD_BOOTCMD \
-       "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
-               "rootfstype=ext4 rootwait\0" \
-       "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-               "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
-               "${vidargs}; echo Booting from SD card; " \
-               "run sddtbload; load mmc ${sddev}:${sdbootpart} "\
-               "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "sdbootpart=1\0" \
-       "sddev=1\0" \
-       "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
-               "${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
-               "${fdt_addr_r}\" && true\0" \
-       "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-       "sdrootpart=2\0"
-
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
@@ -180,7 +163,6 @@
        "fdt_fixup=;\0" \
        MEM_LAYOUT_ENV_SETTINGS \
        NFS_BOOTCMD \
-       SD_BOOTCMD \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
                "flash_eth.img && source ${loadaddr}\0" \