arm: imx: imx-common: init: move arch init common setup

Move common imx6 arch init setup, init.c can be extended
and reused to support imx7 SoC keeping init arch common
code.

Signed-off-by: Adrian Alonso <aalonso@freescale.com>

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 2f7d5c88bb44ae18780b0c1e8d180d4425101ff4..06f63daedc4f5cb0a09c21a2e38edc6a4c864a25 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -183,65 +183,6 @@ u32 __weak get_board_rev(void)
 }
 #endif
 
-void init_aips(void)
-{
-       struct aipstz_regs *aips1, *aips2;
-#ifdef CONFIG_MX6SX
-       struct aipstz_regs *aips3;
-#endif
-
-       aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
-       aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
-#ifdef CONFIG_MX6SX
-       aips3 = (struct aipstz_regs *)AIPS3_CONFIG_BASE_ADDR;
-#endif
-
-       /*
-        * Set all MPROTx to be non-bufferable, trusted for R/W,
-        * not forced to user-mode.
-        */
-       writel(0x77777777, &aips1->mprot0);
-       writel(0x77777777, &aips1->mprot1);
-       writel(0x77777777, &aips2->mprot0);
-       writel(0x77777777, &aips2->mprot1);
-
-       /*
-        * Set all OPACRx to be non-bufferable, not require
-        * supervisor privilege level for access,allow for
-        * write access and untrusted master access.
-        */
-       writel(0x00000000, &aips1->opacr0);
-       writel(0x00000000, &aips1->opacr1);
-       writel(0x00000000, &aips1->opacr2);
-       writel(0x00000000, &aips1->opacr3);
-       writel(0x00000000, &aips1->opacr4);
-       writel(0x00000000, &aips2->opacr0);
-       writel(0x00000000, &aips2->opacr1);
-       writel(0x00000000, &aips2->opacr2);
-       writel(0x00000000, &aips2->opacr3);
-       writel(0x00000000, &aips2->opacr4);
-
-#ifdef CONFIG_MX6SX
-       /*
-        * Set all MPROTx to be non-bufferable, trusted for R/W,
-        * not forced to user-mode.
-        */
-       writel(0x77777777, &aips3->mprot0);
-       writel(0x77777777, &aips3->mprot1);
-
-       /*
-        * Set all OPACRx to be non-bufferable, not require
-        * supervisor privilege level for access,allow for
-        * write access and untrusted master access.
-        */
-       writel(0x00000000, &aips3->opacr0);
-       writel(0x00000000, &aips3->opacr1);
-       writel(0x00000000, &aips3->opacr2);
-       writel(0x00000000, &aips3->opacr3);
-       writel(0x00000000, &aips3->opacr4);
-#endif
-}
-
 static void clear_ldo_ramp(void)
 {
        struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
@@ -375,22 +316,6 @@ static void set_preclk_from_osc(void)
 }
 #endif
 
-#define SRC_SCR_WARM_RESET_ENABLE      0
-
-static void init_src(void)
-{
-       struct src *src_regs = (struct src *)SRC_BASE_ADDR;
-       u32 val;
-
-       /*
-        * force warm reset sources to generate cold reset
-        * for a more reliable restart
-        */
-       val = readl(&src_regs->scr);
-       val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE);
-       writel(val, &src_regs->scr);
-}
-
 int arch_cpu_init(void)
 {
        init_aips();
@@ -458,18 +383,6 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 }
 #endif
 
-void boot_mode_apply(unsigned cfg_val)
-{
-       unsigned reg;
-       struct src *psrc = (struct src *)SRC_BASE_ADDR;
-       writel(cfg_val, &psrc->gpr9);
-       reg = readl(&psrc->gpr10);
-       if (cfg_val)
-               reg |= 1 << 28;
-       else
-               reg &= ~(1 << 28);
-       writel(reg, &psrc->gpr10);
-}
 /*
  * cfg_val will be used for
  * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]

diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 3b034e16cdbdc00934fe305570afc19a107cd5f6..d77a2363ddc700ebd6f44f0eb7b9bca3c749ae8a 100644 (file)
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -19,7 +19,7 @@ obj-y += misc.o
 obj-$(CONFIG_SPL_BUILD)        += spl.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6))
-obj-y  += cache.o
+obj-y  += cache.o init.o
 obj-$(CONFIG_CMD_SATA) += sata.o
 obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
 endif

diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
new file mode 100644 (file)
index 0000000..f7ed038
--- /dev/null
+++ b/arch/arm/imx-common/init.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/arch/crm_regs.h>
+
+void init_aips(void)
+{
+       struct aipstz_regs *aips1, *aips2;
+#ifdef CONFIG_MX6SX
+       struct aipstz_regs *aips3;
+#endif
+
+       aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
+       aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
+#ifdef CONFIG_MX6SX
+       aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR;
+#endif
+
+       /*
+        * Set all MPROTx to be non-bufferable, trusted for R/W,
+        * not forced to user-mode.
+        */
+       writel(0x77777777, &aips1->mprot0);
+       writel(0x77777777, &aips1->mprot1);
+       writel(0x77777777, &aips2->mprot0);
+       writel(0x77777777, &aips2->mprot1);
+
+       /*
+        * Set all OPACRx to be non-bufferable, not require
+        * supervisor privilege level for access,allow for
+        * write access and untrusted master access.
+        */
+       writel(0x00000000, &aips1->opacr0);
+       writel(0x00000000, &aips1->opacr1);
+       writel(0x00000000, &aips1->opacr2);
+       writel(0x00000000, &aips1->opacr3);
+       writel(0x00000000, &aips1->opacr4);
+       writel(0x00000000, &aips2->opacr0);
+       writel(0x00000000, &aips2->opacr1);
+       writel(0x00000000, &aips2->opacr2);
+       writel(0x00000000, &aips2->opacr3);
+       writel(0x00000000, &aips2->opacr4);
+
+#ifdef CONFIG_MX6SX
+       /*
+        * Set all MPROTx to be non-bufferable, trusted for R/W,
+        * not forced to user-mode.
+        */
+       writel(0x77777777, &aips3->mprot0);
+       writel(0x77777777, &aips3->mprot1);
+
+       /*
+        * Set all OPACRx to be non-bufferable, not require
+        * supervisor privilege level for access,allow for
+        * write access and untrusted master access.
+        */
+       writel(0x00000000, &aips3->opacr0);
+       writel(0x00000000, &aips3->opacr1);
+       writel(0x00000000, &aips3->opacr2);
+       writel(0x00000000, &aips3->opacr3);
+       writel(0x00000000, &aips3->opacr4);
+#endif
+}
+
+#define SRC_SCR_WARM_RESET_ENABLE      0
+
+void init_src(void)
+{
+       struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+       u32 val;
+
+       /*
+        * force warm reset sources to generate cold reset
+        * for a more reliable restart
+        */
+       val = readl(&src_regs->scr);
+       val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE);
+       writel(val, &src_regs->scr);
+}
+
+void boot_mode_apply(unsigned cfg_val)
+{
+       unsigned reg;
+       struct src *psrc = (struct src *)SRC_BASE_ADDR;
+       writel(cfg_val, &psrc->gpr9);
+       reg = readl(&psrc->gpr10);
+       if (cfg_val)
+               reg |= 1 << 28;
+       else
+               reg &= ~(1 << 28);
+       writel(reg, &psrc->gpr10);
+}

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index a685ed2c3b45ce0056c465f5c34429736077178b..74512ac08e3825a2c9952266fac966e900cf5eb0 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -137,8 +137,10 @@
 /* Defines for Blocks connected via AIPS (SkyBlue) */
 #define ATZ1_BASE_ADDR              AIPS1_ARB_BASE_ADDR
 #define ATZ2_BASE_ADDR              AIPS2_ARB_BASE_ADDR
+#define ATZ3_BASE_ADDR              AIPS3_ARB_BASE_ADDR
 #define AIPS1_BASE_ADDR             AIPS1_ON_BASE_ADDR
 #define AIPS2_BASE_ADDR             AIPS2_ON_BASE_ADDR
+#define AIPS3_BASE_ADDR             AIPS3_ON_BASE_ADDR
 
 #define SPDIF_BASE_ADDR             (ATZ1_BASE_ADDR + 0x04000)
 #define ECSPI1_BASE_ADDR            (ATZ1_BASE_ADDR + 0x08000)
@@ -219,6 +221,8 @@
 
 #define AIPS2_ON_BASE_ADDR          (ATZ2_BASE_ADDR + 0x7C000)
 #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
+#define AIPS3_ON_BASE_ADDR          (ATZ3_BASE_ADDR + 0x7C000)
+#define AIPS3_OFF_BASE_ADDR         (ATZ3_BASE_ADDR + 0x80000)
 #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
 #define ARM_BASE_ADDR              (ATZ2_BASE_ADDR + 0x40000)
 

diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
index 250f3f4db6042bf17694dd1f2229fd642b2a6c23..c0a5b2cdb9968746fcb56fb5dc412baadf3c4543 100644 (file)
--- a/arch/arm/include/asm/imx-common/sys_proto.h
+++ b/arch/arm/include/asm/imx-common/sys_proto.h
@@ -35,6 +35,9 @@ u32 imx_ddr_size(void);
 void sdelay(unsigned long);
 void set_chipselect_size(int const);
 
+void init_aips(void);
+void init_src(void);
+
 /*
  * Initializes on-chip ethernet controllers.
  * to override, implement board_eth_init()