serial: Add missing Kconfig dependencies for debug consoles

Debug console is the part of serial driver in the same file. It means to be
able to enable debug console you also need to enable driver itself.
That's why add all dependecies and list only debug consoles which are
enabled based on driver selection to avoid compilation error when user
asks for certain debug console but driver is not enable for it.

Error:
aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc':
/home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to `printch'
aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `puts':
/home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Fix ns16550 dependency, add ZYNQ_SERIAL, change S5P]
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6d1e47cc34ca895191326a3b00a543b1b41851a4..17d0e7362379e4613b8320b68c5aa26d844901dc 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -189,6 +189,7 @@ choice
 
 config DEBUG_UART_ALTERA_JTAGUART
        bool "Altera JTAG UART"
+       depends on ALTERA_JTAG_UART
        help
          Select this to enable a debug UART using the altera_jtag_uart driver.
          You will need to provide parameters to make this work. The driver will
@@ -196,6 +197,7 @@ config DEBUG_UART_ALTERA_JTAGUART
 
 config DEBUG_UART_ALTERA_UART
        bool "Altera UART"
+       depends on ALTERA_UART
        help
          Select this to enable a debug UART using the altera_uart driver.
          You will need to provide parameters to make this work. The driver will
@@ -221,6 +223,7 @@ config DEBUG_ARC_SERIAL
 
 config DEBUG_UART_ATMEL
        bool "Atmel USART"
+       depends on ATMEL_USART
        help
          Select this to enable a debug UART using the atmel usart driver. You
          will need to provide parameters to make this work. The driver will
@@ -236,6 +239,7 @@ config DEBUG_UART_BCM6345
 
 config DEBUG_UART_NS16550
        bool "ns16550"
+       depends on SYS_NS16550
        help
          Select this to enable a debug UART using the ns16550 driver. You
          will need to provide parameters to make this work. The driver will
@@ -252,6 +256,7 @@ config DEBUG_EFI_CONSOLE
 
 config DEBUG_UART_S5P
        bool "Samsung S5P"
+       depends on ARCH_EXYNOS || ARCH_S5PC1XX
        help
          Select this to enable a debug UART using the serial_s5p driver. You
          will need to provide parameters to make this work. The driver will
@@ -267,6 +272,7 @@ config DEBUG_UART_MESON
 
 config DEBUG_UART_UARTLITE
        bool "Xilinx Uartlite"
+       depends on XILINX_UARTLITE
        help
          Select this to enable a debug UART using the serial_uartlite driver.
          You will need to provide parameters to make this work. The driver will
@@ -274,6 +280,7 @@ config DEBUG_UART_UARTLITE
 
 config DEBUG_UART_ARM_DCC
        bool "ARM DCC"
+       depends on ARM_DCC
        help
          Select this to enable a debug UART using the ARM JTAG DCC port.
          The DCC port can be used for very early debugging and doesn't require
@@ -285,6 +292,7 @@ config DEBUG_UART_ARM_DCC
 
 config DEBUG_MVEBU_A3700_UART
        bool "Marvell Armada 3700"
+       depends on MVEBU_A3700_UART
        help
          Select this to enable a debug UART using the serial_mvebu driver. You
          will need to provide parameters to make this work. The driver will
@@ -292,6 +300,7 @@ config DEBUG_MVEBU_A3700_UART
 
 config DEBUG_UART_ZYNQ
        bool "Xilinx Zynq"
+       depends on ZYNQ_SERIAL
        help
          Select this to enable a debug UART using the serial_zynq driver. You
          will need to provide parameters to make this work. The driver will
@@ -307,6 +316,7 @@ config DEBUG_UART_APBUART
 
 config DEBUG_UART_PL010
        bool "pl010"
+       depends on PL01X_SERIAL
        help
          Select this to enable a debug UART using the pl01x driver with the
          PL010 UART type. You will need to provide parameters to make this
@@ -315,6 +325,7 @@ config DEBUG_UART_PL010
 
 config DEBUG_UART_PL011
        bool "pl011"
+       depends on PL011_SERIAL
        help
          Select this to enable a debug UART using the pl01x driver with the
          PL011 UART type. You will need to provide parameters to make this
@@ -348,6 +359,7 @@ config DEBUG_UART_SANDBOX
 
 config DEBUG_UART_SIFIVE
        bool "SiFive UART"
+       depends on PL01X_SERIAL
        help
          Select this to enable a debug UART using the serial_sifive driver. You
          will need to provide parameters to make this work. The driver will
@@ -373,6 +385,7 @@ config DEBUG_UART_UNIPHIER
 
 config DEBUG_UART_OMAP
        bool "OMAP uart"
+       depends on OMAP_SERIAL
        help
          Select this to enable a debug UART using the omap ns16550 driver.
          You will need to provide parameters to make this work. The driver