rockchip: enable USB OHCI host for RockPro64

rockchip: enable USB OHCI host for RockPro64

U-Boot has video output enabled so time to get keyboard working.

=> usb reset;usb tree
resetting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 3 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 1!?
2 USB Device(s) found
       scanning usb for storage devices... 2 Storage Device(s) found
USB device tree:
  1  Hub (480 Mb/s, 0mA)
     u-boot EHCI Host Controller

  1  Hub (12 Mb/s, 0mA)
      U-Boot Root Hub

  1  Hub (480 Mb/s, 0mA)
     u-boot EHCI Host Controller

  1  Hub (12 Mb/s, 0mA)
  |   U-Boot Root Hub
  |
  +-2  Hub (12 Mb/s, 100mA)
    |  ALCOR Generic USB Hub
    |
    +-3  Mass Storage (12 Mb/s, 200mA)
         Kingston DT 101 G2 001478544887BB3157380157

  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Mass Storage (5 Gb/s, 76mA)
       ADATA ADATA USB Flash Drive 1520405012240002

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>