]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2017-03-20 Tero KristoARM: am43xx: fix SOC revision print outs
2017-03-20 Robert P. J... test-fit.py: Minor grammar/spelling/clarification tweaks
2017-03-20 Philipp Tomsichpart_efi: document device-tree binding for part_efi...
2017-03-20 Philipp Tomsichdoc: move documentation for /config node into a separat...
2017-03-20 Philipp Tomsichpart_efi: support padding between the GPT header and...
2017-03-20 Roger Quadrosnet: don't override ethernet address environment
2017-03-20 Roger QuadrosARM: k2g: setup PRU ethernet MAC addresses
2017-03-20 Roger QuadrosARM: Use Kconfig for board EEPROM's I2C bus and chip...
2017-03-20 Nishanth Menonboard: ti: am57xx-idk: Auto detect LCD Panel
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Support 6 port Ethernet or 4...
2017-03-20 Roger Quadrosti: common: board_detect: commodify ethaddr environment...
2017-03-20 Franklin S... ti_armv7_keystone2: Define scratch space in SRAM
2017-03-20 Lokesh Vutlati: common: board_detect: Rename EEPROM scratch start...
2017-03-20 Roger QuadrosARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro
2017-03-20 Tom Rinitravis-ci: Re-work i.MX6 jobs, clarify Freescale and...
2017-03-20 Jean-Jacques... ti: boot: Register the MMC controllers in SPL in the...
2017-03-19 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2017-03-19 Philipp TomsichKconfig: Migrate CONFIG_BAUDRATE
2017-03-19 Tim Harveyimx: ventana: add EMMC configuration
2017-03-19 Peng Fantools: imximage: add set bit command
2017-03-19 Stefan AgnerARM: vf610: move to standard arch/board approach
2017-03-19 Tim Harveyimx: ventana: make SD3_VSELECT board specific
2017-03-19 Tim Harveyimx: ventana: make OTG VBUS power enable board specific
2017-03-19 Tim Harveyimx: ventana: fix hwconfig
2017-03-19 Tim Harveyimx: ventana: change name of rs232_en to indicate polarity
2017-03-19 Tim Harveyimx: ventana: use mmc_root in boot scripts
2017-03-19 Tim Harveyimx: ventana: move mmc_init to common
2017-03-19 Tim Harveyimx: ventana: config: add gzwrite support
2017-03-19 Tim Harveyimx: ventana: add additional DRAM configurations
2017-03-19 Stefan Agnercolibri_imx7: split and resize firmware MTD partition
2017-03-19 Stefan Agnercolibri_imx7: use device-tree for MTD partitions
2017-03-19 Stefan Agnercolibri_imx7: setup PMIC sleep mode configuration
2017-03-19 Stefan Agnercolibri_imx7: implement board level USB PHY mode
2017-03-19 Stefan Agnercolibri_imx7/colibri_imx6/apalis_imx6: limit bootm...
2017-03-19 Stefan Agnertoradex apalis/colibri: add device tree overlay support
2017-03-19 Stefan Agnertoradex apalis/colibri: use common USB product id fallback
2017-03-19 Fabio Estevammx7: Add 1.2GHz speed grade entry
2017-03-19 Fabio Estevammx7: Fix the get_cpu_speed_grade_hz() return values
2017-03-19 Fabio Estevammx7: Fix speed grade entry
2017-03-19 Sébastien Szymanskiarm: dts: imx6ul: add usbotg aliases
2017-03-19 Sébastien Szymanskiarm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and...
2017-03-19 Sébastien Szymanskidm: imx: serial: add i.MX6UL support
2017-03-19 Lukasz MajewskiMCCMON6: defconfig: Move 'quiet' console parameter...
2017-03-19 Tom Riniarm: Migrate SYS_THUMB_BUILD to Kconfig, introduce...
2017-03-18 Andrew F. DavisKconfig: Disable non-FIT SPL loading for TI secure...
2017-03-18 Andrew F. Davisspl: Add option to enable SPL Legacy image support
2017-03-18 Andrew F. Davisspl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a posit...
2017-03-17 Tom RiniMerge git://git.denx.de/u-boot-rockchip
2017-03-17 Vikas ManochaARM: DT: stm32f7: add qspi pin contol node
2017-03-17 Vikas ManochaARM: DT: stm32f7: add ethernet pin contol node
2017-03-17 Vikas ManochaARM: DT: stm32f7: add pin control node for serial port...
2017-03-17 Vikas ManochaARM: DT: stm32f7: add pin control device node
2017-03-17 Vikas ManochaPINCTRL: stm32f7: add pin control driver
2017-03-17 Vikas Manochastm32f7: clk: remove usart1 clock enable from board...
2017-03-17 Vikas ManochaARM: DT: stm32f7: add usart1 & clock device tree nodes
2017-03-17 Vikas Manochastm32f7: serial: use clock driver to enable clock
2017-03-17 Vikas Manochaclk: stm32f7: add clock driver for stm32f7 family
2017-03-17 Vikas Manochaserial: stm32f7: add device tree support
2017-03-17 Vikas Manochaarm: use common instructions applicable to armv7m ...
2017-03-17 Tom Riniarm: Update our 'ret' assembler macro slightly
2017-03-17 Vincent Tinelligpt: Fix uuid string format
2017-03-17 Sebastien Colleurcmd: itest: correct calculus for long format
2017-03-17 Andre Przywaraconfigs: move CMD_MD5SUM definition to defconfigs
2017-03-17 Andre PrzywaraKconfig: define MD5 dependency for FIT support
2017-03-17 Andre PrzywaraKconfig: introduce md5sum command selection
2017-03-17 Andre Przywarakirkwood: remove get_random_hex() and MD5 dependency
2017-03-17 Markus Niebelarm: imx6: tqma6: add support for TQMa6DL variant
2017-03-17 Markus Niebelarm: imx6: tqma6: use CONFIG_TQM6x for SOM specific...
2017-03-17 Jagan Tekii.MX6Q: isiot: Switch the mmc env based on devno
2017-03-17 Jagan Tekii.MX6Q: icorem6_rqs: Add mmc_late_init
2017-03-17 Jagan Tekii.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
2017-03-17 Jagan Tekiimx6: icorem6_rqs: Add eMMC boot support
2017-03-17 Markus Niebelmx6: tqma6: clear enet clk sel for mba6
2017-03-17 Markus Niebelimx6: tqma6: adjust ethernet phy reset delay
2017-03-17 Markus Niebelimx6: tqma6: disable spi CS unused in U-Boot
2017-03-17 Markus Niebelimx6: tqma6: use lower driver stength for I2C pins
2017-03-17 Markus Niebelimx6: tqma6: implement power_init_board
2017-03-17 Jagan Tekiimx6: icorem6_rqs: Update SPL board boot order for...
2017-03-17 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add eMMC node
2017-03-17 Jagan Tekii.MX6UL: isiot: Switch the mmc env based on devno
2017-03-17 Jagan Tekii.MX6UL: isiot: Add mmc_late_init
2017-03-17 Jagan Tekii.MX6UL: isiot: Add modeboot env via board_late_init
2017-03-17 Jagan Tekii.MX6UL: isiot: Add eMMC boot support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Update SPL board boot order for eMMC
2017-03-17 Jagan Tekiimx6: Add src_base structure define macro
2017-03-17 Jagan Tekiimx: Use IMX6_BMODE_* macros instead of numericals
2017-03-17 Jagan Tekiimx: spl: Update NAND bootmode detection bit
2017-03-17 Jagan Tekiimx6: Add imx6_src_get_boot_mode
2017-03-17 Jagan Tekii.MX6: engicam: Include dts files under MAINTAINERS
2017-03-17 Jagan Tekiimx6ul: isiotmx6ul: Enable I2C support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add nandboot env support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add NAND support
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add FEC support
2017-03-17 Jagan Tekiarm: dts: imx6ul-isiot: Add FEC node
2017-03-17 Jagan Tekiimx6: isiotmx6ul: Add I2C support
2017-03-17 Jagan Tekiarm: dts: imx6ul-isiot: Add I2C nodes
2017-03-17 Jagan Tekiarm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initi...
2017-03-17 Jagan Tekiconfigs: imx6: Don't define USDHC2_BASE_ADDR
2017-03-17 Peng Fanimx: mx7ulp_evk: enable mmc/regulator support
next