From f99bf3b06c717a81e41843737912302b7263a6c8 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 29 Jul 2019 08:58:09 +0200 Subject: [PATCH] davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski --- board/davinci/da8xxevm/omapl138_lcdk.c | 16 ++++++++++++++++ configs/omapl138_lcdk_defconfig | 5 +++++ 2 files changed, 21 insertions(+) diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index 7f8c28b953..578d928443 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include #include @@ -355,3 +357,17 @@ int board_mmc_init(bd_t *bis) } #endif #endif + +#ifdef CONFIG_SPL_BUILD +static const struct ns16550_platdata serial_pdata = { + .base = DAVINCI_UART2_BASE, + .reg_shift = 2, + .clock = 228000000, + .fcr = UART_FCR_DEFVAL, +}; + +U_BOOT_DEVICE(omapl138_uart) = { + .name = "ns16550_serial", + .platdata = &serial_pdata, +}; +#endif diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index c4eebb3612..26b4950f8f 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -33,10 +33,13 @@ CONFIG_CMD_MTDPARTS=y CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk" +CONFIG_SPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_NAND=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SPL_DM=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_DAVINCI=y CONFIG_DM_MMC=y @@ -51,6 +54,8 @@ CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y +CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_USE_TINY_PRINTF=y +# CONFIG_SPL_OF_LIBFDT is not set -- 2.39.5