From d8ffd938f1903cbf5cf03d75e2306e0da8ce4ffb Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Wed, 29 Sep 2021 13:39:10 +0200 Subject: [PATCH] board: sl28: generate FIT update image Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet. Signed-off-by: Michael Walle Reviewed-by: Priyanka Jain --- .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 35 +++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index b3861ed98c..a501cece69 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -15,6 +15,12 @@ }; binman: binman { + multiple-images; + }; +}; + +&binman { + u_boot_rom: u-boot-rom { filename = "u-boot.rom"; pad-byte = <0xff>; @@ -133,6 +139,31 @@ }; }; +&binman { + u-boot-update { + filename = "u-boot.update"; + + fit { + description = "FIT update image"; + + images { + u-boot-bin { + description = "U-Boot"; + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = <0>; /* unused */ + + blob { + filename = "u-boot.rom"; + }; + }; + }; + }; + }; +}; + #ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE / { chosen { @@ -142,7 +173,7 @@ #endif #ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31 -&binman { +&u_boot_rom { fit { images { bl31 { @@ -191,7 +222,7 @@ #endif #ifdef CONFIG_SL28_SPL_LOADS_OPTEE_BL32 -&binman { +&u_boot_rom { fit { images { bl32 { -- 2.39.5