From cb391e339932d9e87477082b2b4b491a78b9ca41 Mon Sep 17 00:00:00 2001 From: Ye Li <ye.li@nxp.com> Date: Sun, 21 Feb 2021 08:26:24 -0800 Subject: [PATCH] imx8mq_evk: Enable the USB3.0 host port Setup USB clock in board codes, and enable the DWC3 XHCI and PHY drivers to make USB3.0 host port working on i.MX8MQ EVK. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> --- board/freescale/imx8mq_evk/imx8mq_evk.c | 4 ++++ configs/imx8mq_evk_defconfig | 9 +++++++++ 2 files changed, 13 insertions(+) diff --git a/board/freescale/imx8mq_evk/imx8mq_evk.c b/board/freescale/imx8mq_evk/imx8mq_evk.c index 93da67d779..e394805856 100644 --- a/board/freescale/imx8mq_evk/imx8mq_evk.c +++ b/board/freescale/imx8mq_evk/imx8mq_evk.c @@ -86,6 +86,10 @@ int board_init(void) setup_fec(); #endif +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3) + init_usb_clk(); +#endif + return 0; } diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 1df4192401..f4d5397674 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -53,3 +53,12 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RESET=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y +CONFIG_CMD_USB=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_PHY=y +CONFIG_PHY_IMX8MQ_USB=y -- 2.39.5