From b62450cf229c50ad2ce819dd02a09726909cc89a Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= Date: Fri, 27 May 2022 22:15:24 +0200 Subject: [PATCH] serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit CONFIG_VAL(DEBUG_UART_BASE) expands to CONFIG_DEBUG_UART_BASE or CONFIG_SPL_DEBUG_UART_BASE or CONFIG_TPL_DEBUG_UART_BASE and allows boards to set different values for SPL, TPL and U-Boot Proper. For ns16550 driver this support is there since commit d293759d55cc ("serial: ns16550: Add support for SPL_DEBUG_UART_BASE"). Signed-off-by: Pali Rohár --- arch/arm/mach-uniphier/debug-uart/debug-uart.c | 4 ++-- arch/x86/cpu/apollolake/cpu_common.c | 2 +- board/eets/pdu001/board.c | 2 +- drivers/serial/altera_jtag_uart.c | 2 +- drivers/serial/altera_uart.c | 4 ++-- drivers/serial/atmel_usart.c | 4 ++-- drivers/serial/serial_ar933x.c | 4 ++-- drivers/serial/serial_arc.c | 4 ++-- drivers/serial/serial_bcm6345.c | 4 ++-- drivers/serial/serial_linflexuart.c | 4 ++-- drivers/serial/serial_meson.c | 2 +- drivers/serial/serial_msm_geni.c | 6 +++--- drivers/serial/serial_mt7620.c | 4 ++-- drivers/serial/serial_mtk.c | 4 ++-- drivers/serial/serial_mvebu_a3700.c | 4 ++-- drivers/serial/serial_mxc.c | 4 ++-- drivers/serial/serial_omap.c | 4 ++-- drivers/serial/serial_pic32.c | 4 ++-- drivers/serial/serial_pl01x.c | 4 ++-- drivers/serial/serial_s5p.c | 4 ++-- drivers/serial/serial_sifive.c | 4 ++-- drivers/serial/serial_stm32.c | 4 ++-- drivers/serial/serial_xuartlite.c | 4 ++-- drivers/serial/serial_zynq.c | 4 ++-- 24 files changed, 45 insertions(+), 45 deletions(-) diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/arch/arm/mach-uniphier/debug-uart/debug-uart.c index d116d46812..1ba012ca45 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.c @@ -18,7 +18,7 @@ static void _debug_uart_putc(int c) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE)) ; @@ -57,7 +57,7 @@ void sg_set_iectrl(unsigned int pin) void _debug_uart_init(void) { #ifdef CONFIG_SPL_BUILD - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); unsigned int divisor; switch (uniphier_get_soc_id()) { diff --git a/arch/x86/cpu/apollolake/cpu_common.c b/arch/x86/cpu/apollolake/cpu_common.c index 5d7d26b140..9a5502617b 100644 --- a/arch/x86/cpu/apollolake/cpu_common.c +++ b/arch/x86/cpu/apollolake/cpu_common.c @@ -72,7 +72,7 @@ static void pch_uart_init(void) } #ifdef CONFIG_DEBUG_UART - apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE); + apl_uart_init(PCH_DEV_UART, CONFIG_VAL(DEBUG_UART_BASE)); #endif } diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c index 2b483dab8e..1054837d43 100644 --- a/board/eets/pdu001/board.c +++ b/board/eets/pdu001/board.c @@ -273,7 +273,7 @@ void board_debug_uart_init(void) setup_early_clocks(); /* done by pin controller driver if not debugging */ - enable_uart_pin_mux(CONFIG_DEBUG_UART_BASE); + enable_uart_pin_mux(CONFIG_VAL(DEBUG_UART_BASE)); } #endif diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 4435fcf56b..9e39da7dd2 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -134,7 +134,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct altera_jtaguart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; + struct altera_jtaguart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); while (1) { u32 st = readl(®s->control); diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index b18be6e245..3592048084 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -123,7 +123,7 @@ U_BOOT_DRIVER(altera_uart) = { static inline void _debug_uart_init(void) { - struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; + struct altera_uart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); u32 div; div = (CONFIG_DEBUG_UART_CLOCK / CONFIG_BAUDRATE) - 1; @@ -132,7 +132,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; + struct altera_uart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); while (1) { u32 st = readl(®s->status); diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index bd14f3e781..1fb9ee5cc9 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -319,14 +319,14 @@ U_BOOT_DRIVER(serial_atmel) = { #ifdef CONFIG_DEBUG_UART_ATMEL static inline void _debug_uart_init(void) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE); _atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); } static inline void _debug_uart_putc(int ch) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE); while (!(readl(&usart->csr) & USART3_BIT(TXRDY))) ; diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c index da06bef97c..4f91634976 100644 --- a/drivers/serial/serial_ar933x.c +++ b/drivers/serial/serial_ar933x.c @@ -199,7 +199,7 @@ U_BOOT_DRIVER(serial_ar933x) = { static inline void _debug_uart_init(void) { - void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + void __iomem *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); u32 val, scale, step; /* @@ -227,7 +227,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int c) { - void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + void __iomem *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); u32 data; do { diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c index 8f3e4dd44f..b2d95bdbe1 100644 --- a/drivers/serial/serial_arc.c +++ b/drivers/serial/serial_arc.c @@ -137,7 +137,7 @@ U_BOOT_DRIVER(serial_arc) = { static inline void _debug_uart_init(void) { - struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_DEBUG_UART_BASE; + struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_VAL(DEBUG_UART_BASE); int arc_console_baud = CONFIG_DEBUG_UART_CLOCK / (CONFIG_BAUDRATE * 4) - 1; writeb(arc_console_baud & 0xff, ®s->baudl); @@ -146,7 +146,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int c) { - struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_DEBUG_UART_BASE; + struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_VAL(DEBUG_UART_BASE); while (!(readb(®s->status) & UART_TXEMPTY)) ; diff --git a/drivers/serial/serial_bcm6345.c b/drivers/serial/serial_bcm6345.c index f08e91ff3b..2359656a23 100644 --- a/drivers/serial/serial_bcm6345.c +++ b/drivers/serial/serial_bcm6345.c @@ -269,7 +269,7 @@ U_BOOT_DRIVER(bcm6345_serial) = { #ifdef CONFIG_DEBUG_UART_BCM6345 static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); bcm6345_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); } @@ -285,7 +285,7 @@ static inline void wait_xfered(void __iomem *base) static inline void _debug_uart_putc(int ch) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); wait_xfered(base); writel(ch, base + UART_FIFO_REG); diff --git a/drivers/serial/serial_linflexuart.c b/drivers/serial/serial_linflexuart.c index 876a4baa9f..b449e55a65 100644 --- a/drivers/serial/serial_linflexuart.c +++ b/drivers/serial/serial_linflexuart.c @@ -201,14 +201,14 @@ U_BOOT_DRIVER(serial_linflex) = { static inline void _debug_uart_init(void) { - struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE; + struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_VAL(DEBUG_UART_BASE); linflex_serial_init_internal(base); } static inline void _debug_uart_putc(int ch) { - struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE; + struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_VAL(DEBUG_UART_BASE); /* XXX: Is this OK? Should this use the non-DM version? */ _linflex_serial_putc(base, ch); diff --git a/drivers/serial/serial_meson.c b/drivers/serial/serial_meson.c index d69ec221e4..c5ed3ede45 100644 --- a/drivers/serial/serial_meson.c +++ b/drivers/serial/serial_meson.c @@ -182,7 +182,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct meson_uart *regs = (struct meson_uart *)CONFIG_DEBUG_UART_BASE; + struct meson_uart *regs = (struct meson_uart *)CONFIG_VAL(DEBUG_UART_BASE); while (readl(®s->status) & AML_UART_TX_FULL) ; diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 3e255a99dc..3943ca43e4 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -569,7 +569,7 @@ U_BOOT_DRIVER(serial_msm_geni) = { #ifdef CONFIG_DEBUG_UART_MSM_GENI static struct msm_serial_data init_serial_data = { - .base = CONFIG_DEBUG_UART_BASE + .base = CONFIG_VAL(DEBUG_UART_BASE) }; /* Serial dumb device, to reuse driver code */ @@ -587,7 +587,7 @@ static struct udevice init_dev = { static inline void _debug_uart_init(void) { - phys_addr_t base = CONFIG_DEBUG_UART_BASE; + phys_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); geni_serial_init(&init_dev); geni_serial_baud(base, CLK_DIV, CONFIG_BAUDRATE); @@ -596,7 +596,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - phys_addr_t base = CONFIG_DEBUG_UART_BASE; + phys_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); writel(DEF_TX_WM, base + SE_GENI_TX_WATERMARK_REG); qcom_geni_serial_setup_tx(base, 1); diff --git a/drivers/serial/serial_mt7620.c b/drivers/serial/serial_mt7620.c index 76ecc2b38c..5c5264bc96 100644 --- a/drivers/serial/serial_mt7620.c +++ b/drivers/serial/serial_mt7620.c @@ -220,7 +220,7 @@ static inline void _debug_uart_init(void) { struct mt7620_serial_plat plat; - plat.regs = (void *)CONFIG_DEBUG_UART_BASE; + plat.regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); plat.clock = CONFIG_DEBUG_UART_CLOCK; writel(0, &plat.regs->ier); @@ -233,7 +233,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { struct mt7620_serial_regs __iomem *regs = - (void *)CONFIG_DEBUG_UART_BASE; + (void *)CONFIG_VAL(DEBUG_UART_BASE); while (!(readl(®s->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c index 4145d9fdb3..a84f39b3fa 100644 --- a/drivers/serial/serial_mtk.c +++ b/drivers/serial/serial_mtk.c @@ -426,7 +426,7 @@ static inline void _debug_uart_init(void) { struct mtk_serial_priv priv; - priv.regs = (void *) CONFIG_DEBUG_UART_BASE; + priv.regs = (void *) CONFIG_VAL(DEBUG_UART_BASE); priv.clock = CONFIG_DEBUG_UART_CLOCK; writel(0, &priv.regs->ier); @@ -439,7 +439,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { struct mtk_serial_regs __iomem *regs = - (void *) CONFIG_DEBUG_UART_BASE; + (void *) CONFIG_VAL(DEBUG_UART_BASE); while (!(readl(®s->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_mvebu_a3700.c b/drivers/serial/serial_mvebu_a3700.c index 3e673bde57..0fcd7e88ac 100644 --- a/drivers/serial/serial_mvebu_a3700.c +++ b/drivers/serial/serial_mvebu_a3700.c @@ -321,7 +321,7 @@ U_BOOT_DRIVER(serial_mvebu) = { static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); u32 parent_rate, divider; /* reset FIFOs */ @@ -349,7 +349,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL) ; diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index e4970a169b..70a0e5e919 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -372,7 +372,7 @@ U_BOOT_DRIVER(serial_mxc) = { static inline void _debug_uart_init(void) { - struct mxc_uart *base = (struct mxc_uart *)CONFIG_DEBUG_UART_BASE; + struct mxc_uart *base = (struct mxc_uart *)CONFIG_VAL(DEBUG_UART_BASE); _mxc_serial_init(base, false); _mxc_serial_setbrg(base, CONFIG_DEBUG_UART_CLOCK, @@ -381,7 +381,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct mxc_uart *base = (struct mxc_uart *)CONFIG_DEBUG_UART_BASE; + struct mxc_uart *base = (struct mxc_uart *)CONFIG_VAL(DEBUG_UART_BASE); while (!(readl(&base->ts) & UTS_TXEMPTY)) WATCHDOG_RESET(); diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c index ee938f6763..e9ff61a0ba 100644 --- a/drivers/serial/serial_omap.c +++ b/drivers/serial/serial_omap.c @@ -66,7 +66,7 @@ static inline int serial_in_shift(void *addr, int shift) static inline void _debug_uart_init(void) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; + struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); int baud_divisor; baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, @@ -85,7 +85,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; + struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_pic32.c b/drivers/serial/serial_pic32.c index ccdda9f033..3c5d37ce0a 100644 --- a/drivers/serial/serial_pic32.c +++ b/drivers/serial/serial_pic32.c @@ -187,14 +187,14 @@ U_BOOT_DRIVER(pic32_serial) = { static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); pic32_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); } static inline void _debug_uart_putc(int ch) { - writel(ch, CONFIG_DEBUG_UART_BASE + U_TXR); + writel(ch, CONFIG_VAL(DEBUG_UART_BASE) + U_TXR); } DEBUG_UART_FUNCS diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 67caa063c9..9b0d16f164 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -403,7 +403,7 @@ U_BOOT_DRIVER(serial_pl01x) = { static void _debug_uart_init(void) { #ifndef CONFIG_DEBUG_UART_SKIP_INIT - struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE; + struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE); enum pl01x_type type; if (IS_ENABLED(CONFIG_DEBUG_UART_PL011)) @@ -419,7 +419,7 @@ static void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE; + struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE); while (pl01x_putc(regs, ch) == -EAGAIN) ; diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index de420d2d94..4b3947e7f6 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -276,7 +276,7 @@ static inline void _debug_uart_init(void) if (IS_ENABLED(CONFIG_DEBUG_UART_SKIP_INIT)) return; - struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE; + struct s5p_uart *uart = (struct s5p_uart *)CONFIG_VAL(DEBUG_UART_BASE); s5p_serial_init(uart); #if CONFIG_IS_ENABLED(ARCH_APPLE) @@ -288,7 +288,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE; + struct s5p_uart *uart = (struct s5p_uart *)CONFIG_VAL(DEBUG_UART_BASE); #if CONFIG_IS_ENABLED(ARCH_APPLE) while (readl(&uart->ufstat) & S5L_TX_FIFO_FULL); diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c index 794f9c924b..4af1ff5060 100644 --- a/drivers/serial/serial_sifive.c +++ b/drivers/serial/serial_sifive.c @@ -212,7 +212,7 @@ U_BOOT_DRIVER(serial_sifive) = { static inline void _debug_uart_init(void) { struct uart_sifive *regs = - (struct uart_sifive *)CONFIG_DEBUG_UART_BASE; + (struct uart_sifive *)CONFIG_VAL(DEBUG_UART_BASE); _sifive_serial_setbrg(regs, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); @@ -222,7 +222,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { struct uart_sifive *regs = - (struct uart_sifive *)CONFIG_DEBUG_UART_BASE; + (struct uart_sifive *)CONFIG_VAL(DEBUG_UART_BASE); while (_sifive_serial_putc(regs, ch) == -EAGAIN) WATCHDOG_RESET(); diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index f6cb708c37..2ba92bf9c4 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -270,7 +270,7 @@ static inline struct stm32_uart_info *_debug_uart_info(void) static inline void _debug_uart_init(void) { - fdt_addr_t base = CONFIG_DEBUG_UART_BASE; + fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); struct stm32_uart_info *uart_info = _debug_uart_info(); _stm32_serial_init(base, uart_info); @@ -281,7 +281,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int c) { - fdt_addr_t base = CONFIG_DEBUG_UART_BASE; + fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); struct stm32_uart_info *uart_info = _debug_uart_info(); while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN) diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 9780a44d09..b6197da97c 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -143,7 +143,7 @@ U_BOOT_DRIVER(serial_uartlite) = { static inline void _debug_uart_init(void) { - struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + struct uartlite *regs = (struct uartlite *)CONFIG_VAL(DEBUG_UART_BASE); int ret; uart_out32(®s->control, 0); @@ -159,7 +159,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; + struct uartlite *regs = (struct uartlite *)CONFIG_VAL(DEBUG_UART_BASE); while (uart_in32(®s->status) & SR_TX_FIFO_FULL) ; diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 6bb003dc15..83adfb5fb9 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -295,7 +295,7 @@ U_BOOT_DRIVER(serial_zynq) = { #ifdef CONFIG_DEBUG_UART_ZYNQ static inline void _debug_uart_init(void) { - struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE; + struct uart_zynq *regs = (struct uart_zynq *)CONFIG_VAL(DEBUG_UART_BASE); _uart_zynq_serial_init(regs); _uart_zynq_serial_setbrg(regs, CONFIG_DEBUG_UART_CLOCK, @@ -304,7 +304,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { - struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE; + struct uart_zynq *regs = (struct uart_zynq *)CONFIG_VAL(DEBUG_UART_BASE); while (_uart_zynq_serial_putc(regs, ch) == -EAGAIN) WATCHDOG_RESET(); -- 2.39.5