From 8b82a3a7feb06e25b4b731dc5485a1da315d2a93 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 23 Feb 2022 16:17:41 +0100 Subject: [PATCH] arm64: zynqmp: Enable DP driver for SOMs The main reason is to send pmufw cfg overlay from U-Boot to PMUFW to enable access to DP. Overlay is sent when cls command is called and for that IP has to be enabled in carrier cards. And IP needs to be also enabled in SOM dt because with DTB reselection new DT is not parsed in pre reloc U-Boot instance. It is called from board_f via embedded_dtb_select(). That's why bind function is not able to allocate memory and it ends up with error: "Video device 'display@fd4a0000' cannot allocate frame buffer memory -ensure the device is set up before relocation" To avoid this situation DP is placed also to SOM where bind function is called and frame buffer memory is allocated and just reused after DTB reselection. Result is the same. There could be a problem in Linux with different DP configurations but that's need to be solved there because console should be on from u-boot already. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/c4f31641f917fddb09d976f56875057c658f264c.1645629459.git.michal.simek@xilinx.com --- arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 2 +- arch/arm/dts/zynqmp-sm-k26-revA.dts | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index 6ea950a13f..28a3f3c219 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -92,7 +92,7 @@ }; &zynqmp_dpsub { - status = "disabled"; + status = "okay"; phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; assigned-clock-rates = <27000000>, <25000000>, <300000000>; diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts index e9baf4cb41..d242f8712b 100644 --- a/arch/arm/dts/zynqmp-sm-k26-revA.dts +++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts @@ -317,3 +317,7 @@ &ams_pl { status = "okay"; }; + +&zynqmp_dpsub { + status = "okay"; +}; -- 2.39.5