From 3874b6d674d194c8d34b4f7242337c9f2120ca9a Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 11 Jul 2011 02:37:01 +0200
Subject: [PATCH] USB: EHCI: Allow EHCI post-powerup configuration in board
files
This patch allows USB to work on some hosts, which need additional frobing after
the host was powered up via regular USB powerup sequence.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
---
drivers/usb/host/ehci-hcd.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1cee158b01..3f7bc2cef6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -205,6 +205,14 @@ static inline void ehci_invalidate_dcache(struct QH *qh)
}
#endif /* CONFIG_EHCI_DCACHE */
+void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+{
+ mdelay(50);
+}
+
+void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+ __attribute__((weak, alias("__ehci_powerup_fixup")));
+
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
{
uint32_t result;
@@ -713,8 +721,8 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
* usb 2.0 specification say 50 ms resets on
* root
*/
- wait_ms(50);
- /* terminate the reset */
+ ehci_powerup_fixup(status_reg, ®);
+
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
/*
* A host controller must terminate the reset
--
2.39.5