From 0c01c3e876c0db59b4075a4a7550020f0ea25981 Mon Sep 17 00:00:00 2001
From: Erik van Luijk <evanluijk@interact.nl>
Date: Thu, 13 Aug 2015 15:43:18 +0200
Subject: [PATCH] arm: at91: mpddr: allow multiple DDR controllers
MIME-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[remove 'new blank line at EOF']
Signed-off-by: Andreas BieÃmann <andreas.devel@googlemail.com>
---
.../arm/mach-at91/include/mach/atmel_mpddrc.h | 6 ++-
arch/arm/mach-at91/mpddrc.c | 41 ++++++++++---------
.../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +-
.../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +-
board/atmel/sama5d3xek/sama5d3xek.c | 2 +-
.../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +-
board/atmel/sama5d4ek/sama5d4ek.c | 2 +-
board/siemens/corvus/board.c | 2 +-
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/at91sam9n12ek.h | 2 -
include/configs/at91sam9x5ek.h | 2 -
include/configs/corvus.h | 2 -
14 files changed, 34 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
index 130a85abee..c6c8dda803 100644
--- a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
@@ -23,8 +23,10 @@ struct atmel_mpddr {
u32 md;
};
-int ddr2_init(const unsigned int ram_address,
- const struct atmel_mpddr *mpddr);
+
+int ddr2_init(const unsigned int base,
+ const unsigned int ram_address,
+ const struct atmel_mpddr *mpddr);
/* Bit field in mode register */
#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD 0x0
diff --git a/arch/arm/mach-at91/mpddrc.c b/arch/arm/mach-at91/mpddrc.c
index e2b6a49eb9..47e6e5a3cd 100644
--- a/arch/arm/mach-at91/mpddrc.c
+++ b/arch/arm/mach-at91/mpddrc.c
@@ -9,10 +9,10 @@
#include <asm/io.h>
#include <asm/arch/atmel_mpddrc.h>
-static inline void atmel_mpddr_op(int mode, u32 ram_address)
+static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
+ int mode,
+ u32 ram_address)
{
- struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
-
writel(mode, &mpddr->mr);
writel(0, ram_address);
}
@@ -27,10 +27,13 @@ static int ddr2_decodtype_is_seq(u32 cr)
return 1;
}
-int ddr2_init(const unsigned int ram_address,
+
+int ddr2_init(const unsigned int base,
+ const unsigned int ram_address,
const struct atmel_mpddr *mpddr_value)
{
- struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+ const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+
u32 ba_off, cr;
/* Compute bank offset according to NC in configuration register */
@@ -52,30 +55,30 @@ int ddr2_init(const unsigned int ram_address,
writel(mpddr_value->tpr2, &mpddr->tpr2);
/* Issue a NOP command */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
/* A 200 us is provided to precede any signal toggle */
udelay(200);
/* Issue a NOP command */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
/* Issue an all banks precharge command */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
/* Issue an extended mode register set(EMRS2) to choose operation */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
ram_address + (0x2 << ba_off));
/* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
ram_address + (0x3 << ba_off));
/*
* Issue an extended mode register set(EMRS1) to enable DLL and
* program D.I.C (output driver impedance control)
*/
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
ram_address + (0x1 << ba_off));
/* Enable DLL reset */
@@ -83,21 +86,21 @@ int ddr2_init(const unsigned int ram_address,
writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);
/* A mode register set(MRS) cycle is issued to reset DLL */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
/* Issue an all banks precharge command */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
/* Two auto-refresh (CBR) cycles are provided */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
/* Disable DLL reset */
cr = readl(&mpddr->cr);
writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);
/* A mode register set (MRS) cycle is issued to disable DLL reset */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
/* Set OCD calibration in default state */
cr = readl(&mpddr->cr);
@@ -107,7 +110,7 @@ int ddr2_init(const unsigned int ram_address,
* An extended mode register set (EMRS1) cycle is issued
* to OCD default value
*/
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
ram_address + (0x1 << ba_off));
/* OCD calibration mode exit */
@@ -118,11 +121,11 @@ int ddr2_init(const unsigned int ram_address,
* An extended mode register set (EMRS1) cycle is issued
* to enable OCD exit
*/
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
ram_address + (0x1 << ba_off));
/* A nornal mode command is provided */
- atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
/* Perform a write access to any DDR2-SDRAM address */
writel(0, ram_address);
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 4289179ee6..3e65d711c0 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -147,7 +147,7 @@ void mem_init(void)
writel(csa, &mat->ebicsa);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_CS6, &ddr2);
+ ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2);
}
#endif
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index 4f46a03533..8437f37d33 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -327,6 +327,6 @@ void mem_init(void)
writel(csa, &matrix->ebicsa);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_CS1, &ddr2);
+ ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
}
#endif
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 114ac5c85a..0455e2cb30 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -364,6 +364,6 @@ void mem_init(void)
writel(csa, &matrix->ebicsa);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_CS1, &ddr2);
+ ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
}
#endif
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index 92ed4e81d3..0793e4aaba 100644
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -194,7 +194,7 @@ void mem_init(void)
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index cf6ed8b94c..d6e7e163bd 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -433,7 +433,7 @@ void mem_init(void)
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 7d447fe76b..71ec4b7471 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -393,7 +393,7 @@ void mem_init(void)
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index e9bbb4b1c8..de4291f94a 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -389,7 +389,7 @@ void mem_init(void)
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index f3f6dae459..9001fcbcf5 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -160,7 +160,7 @@ void mem_init(void)
writel(csa, &mat->ebicsa);
/* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_CS6, &ddr2);
+ ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2);
}
#endif
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 4d9020975e..2f6a3a57b4 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -251,5 +251,4 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0
#endif
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index ea0a94bcde..acdd63e758 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -259,8 +259,6 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC
-
#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 9f76786202..fbb584d9bf 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -261,8 +261,6 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC
-
#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 2d2f3c11aa..c91e289da8 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -193,6 +193,4 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0
-
#endif
--
2.39.5