From 0343f71f0901c87ac38b274eb303d18b70c1e3e9 Mon Sep 17 00:00:00 2001
From: Paul Kocialkowski <contact@paulk.fr>
Date: Sat, 27 Feb 2016 19:19:03 +0100
Subject: [PATCH] power: twl6030: Configure VUSB voltage on USB device setup
This explicitly sets VUSB voltage to 3.3V when enabling USB.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
drivers/power/twl6030.c | 4 ++++
include/twl6030.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index 7ed9129ac7..df43cca34a 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -248,6 +248,10 @@ void twl6030_usb_device_settings()
{
u8 value = 0;
+ /* 3.3V voltage output for VUSB */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_VOLTAGE,
+ TWL6030_CFG_VOLTAGE_33);
+
/* Enable P1 output for VUSB */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_STATE,
TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
diff --git a/include/twl6030.h b/include/twl6030.h
index 04295c92c5..e68393c95d 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -32,6 +32,7 @@
#define TWL6030_VMMC_CFG_STATE 0x9A
#define TWL6030_VMMC_CFG_VOLTAGE 0x9B
#define TWL6030_VUSB_CFG_STATE 0xA2
+#define TWL6030_VUSB_CFG_VOLTAGE 0xA3
#define TWL6030_CFG_GRP_P1 (1 << 0)
#define TWL6030_CFG_STATE_ON (1 << 0)
@@ -39,6 +40,7 @@
#define TWL6030_CFG_VOLTAGE_18 0x09
#define TWL6030_CFG_VOLTAGE_28 0x13
#define TWL6030_CFG_VOLTAGE_30 0x15
+#define TWL6030_CFG_VOLTAGE_33 0x18
#define MISC1 0xE4
#define VAC_MEAS (1 << 2)
--
2.39.5