Pali Rohár [Tue, 2 Mar 2021 10:17:41 +0000 (11:17 +0100)]
ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the
commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot").
This patch was created by following steps:
1. Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
2. Run following command to omit portions not relevant for a38x and ddr3:
3. Manually omit SPDX-License-Identifier changes from this patch as
upstream license in upstream github repository contains long license
texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x ddr3 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch is removal of dead code and some fixes with
include files.
Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
At this moment, only page 0 of SPD is being read but to support
smbios, we need to read page 1 also which has more info. In order
to do that, we need to allocate more space.
Chunfeng Yun [Wed, 3 Mar 2021 08:07:05 +0000 (16:07 +0800)]
usb: mtu3: flush cache for next GPD
When flush cache of the current GPD and resume QMU, the controller
will try to access the next GPD after processing the current one,
if not flush the next GPD, the controller may get wrong GPD status.
Simon Glass [Tue, 23 Feb 2021 10:35:42 +0000 (05:35 -0500)]
x86: Select advanced Intel code only if allowed
At present most of the Intel-specific code is built on all devices, even
those which don't have software support for the features provided there.
This means that any board can enable CONFIG_INTEL_ACPIGEN even if it does
not have the required features.
Add a new INTEL_SOC option to control this access. This must be selected
by SoCs that can support the required features.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed a typo in arch/x86/Kconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Tue, 23 Feb 2021 10:35:41 +0000 (05:35 -0500)]
x86: Move INTEL_ACPIGEN to arch/x86
This option is better placed in the x86 code since it is not generic
enough to be in the core code. Move it.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed a typo in arch/x86/Kconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
x86: sizeof-array-div error in lpc_common_early_init
Building qemu-x86_64_defconfig with GCC 11.0 fails with:
arch/x86/cpu/intel_common/lpc.c:
In function ‘lpc_common_early_init’:
arch/x86/cpu/intel_common/lpc.c:56:40:
error: expression does not compute the number of elements in this array;
element type is ‘struct reg_info’, not ‘u32’ {aka ‘unsigned int’}
[-Werror=sizeof-array-div]
56 | sizeof(values) / sizeof(u32));
| ^
arch/x86/cpu/intel_common/lpc.c:56:40: note: add parentheses around the
second ‘sizeof’ to silence this warning
arch/x86/cpu/intel_common/lpc.c:50:11: note: array ‘values’ declared here
50 | } values[4], *ptr;
| ^~~~~~
Add parentheses to silence warning.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Neil Armstrong [Wed, 10 Feb 2021 14:22:13 +0000 (15:22 +0100)]
configs: meson64: add fdtoverlay_addr_r
In order to support loading FTD Overlays when booting with the pxe
command (or extlinux.conf), supported with [1], add the missing
fdtoverlay_addr_r used to load the overlay before applying it to
the FDT loaded at fdt_addr_r.
Neil Armstrong [Tue, 23 Feb 2021 15:07:51 +0000 (16:07 +0100)]
button: adc: fix treshold typo
Fix the treshold typo in code by threshold.
Fixes: c0165c85c3 ("button: add a simple Analog to Digital Converter device based button driver") Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Makefile: socfpga: Add target to generate hex output for combined spl and dtb
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel
SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex"
is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It
combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to
generate the final configuration bitstream for Intel SOCFPGA SOC64
devices.
configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfig
CONFIG_BOOTCOMMAND have been moved to Kconfig.boot. This patch
move the CONFIG_BOOTCOMMAND macro from socfpga_soc64_common.h to
*_defconfig file for both Stratix 10 and Agilex.
arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)
Vendor Authorized Boot is a security feature for authenticating
the images such as U-Boot, ARM trusted Firmware, Linux kernel,
device tree blob and etc loaded from FIT. After those images are
loaded from FIT, the VAB certificate and signature block appended
at the end of each image are sent to Secure Device Manager (SDM)
for authentication. U-Boot will validate the SHA384 of the image
against the SHA384 hash stored in the VAB certificate before
sending the image to SDM for authentication.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
Up to now the EFI capsule Python tests were always skipped. The reason is
that mkimage fails with:
uboot_bin_env.its:13.21-23.5: Warning (unit_address_vs_reg):
/images/u-boot-bin@100000: node has a unit name, but no reg property
uboot_bin_env.its:24.21-34.5: Warning (unit_address_vs_reg):
/images/u-boot-env@150000: node has a unit name, but no reg property
If a unit in a device-tree has an address, a reg property must be provided.
But adding a reg property is not the solution here.
Since 2017 unit addresses are disallowed for FIT,
cf. common/image-fit.c:1624.
So remove the unit addresses in uboot_bin_env.its.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
- Convert qemu-ppce500 to driver model and enable additional driver
support
- bug fixes/updates in net-dsa driver, vid driver, move configs to kconfig
- Update Maintainers of some powerpc, layerscape platforms
Bin Meng [Thu, 25 Feb 2021 09:22:55 +0000 (17:22 +0800)]
ppc: qemu: Delete the temporary FDT virtual-physical mapping after U-Boot is relocated
After U-Boot is relocated to RAM already, the previous temporary FDT
virtual-physical mapping that was used in the pre-relocation phase
is no longer needed. Let's delete the mapping.
get_fdt_virt() might be used before and after relocation, update it
to return different virtual address of FDT.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:54 +0000 (17:22 +0800)]
ppc: qemu: Enable RTC support via I2C
The QEMU ppce500 target integrates a Freescale I2C controller and
has a Pericom pt7c4338 RTC connected to it. Enable corresponding
DM drivers so that 'date' command is actually useful.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:53 +0000 (17:22 +0800)]
ppc: qemu: Enable support for power off via GPIO
The QEMU ppce500 target provides the power off functionality via
the GPIO pin#0, and we can support this using the sysreset gpio
poweroff driver. Let's enable it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:52 +0000 (17:22 +0800)]
dm: sysreset: Add a Kconfig option for the 'reset' command
sysreset uclass driver provides an implementation of 'reset'
command using the sysreset_ APIs unconditionally. It also
supports the 'poweroff' command using the sysreset_ APIs,
but under a Kconfig option CONFIG_SYSRESET_CMD_POWEROFF.
Let's do the same for the 'reset' command, by introducing a
new Kconfig option CONFIG_SYSRESET_CMD_RESET, and set it to
on by default, to allow a board that don't have a sysreset
reset driver yet, but have a sysreset poweroff driver to
compile without any issue.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:51 +0000 (17:22 +0800)]
ppc: qemu: Enable GPIO support
QEMU ppce500 target integrates a GPIO controller that is compatible
with the QorIQ GPIO controller. Enable the DM GPIO driver for it
and the 'gpio' command.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:50 +0000 (17:22 +0800)]
gpio: mpc8xxx: Support controller register physical address beyond 32-bit
dev_read_addr_size_index() returns fdt_addr_t which might be a
64-bit physical address. This might be true for some 85xx SoCs
whose CCSBAR is mapped beyond 4 GiB.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:46 +0000 (17:22 +0800)]
ppc: qemu: Enable VirtIO NET support
By default the QEMU ppce500 machine connects a VirtIO NET to the
PCI controller, although it can be replaced to an e1000 NIC via
additional command line options.
Now that we have switched over to DM PCI, VirtIO support becomes
possible. This commit enables the support.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:43 +0000 (17:22 +0800)]
ppc: qemu: Switch over to use DM ETH and PCI
At present the board supports non-DM version PCI and E1000 drivers.
Switch over to use DM ETH and PCI by:
- Rewrite the PCI address map functions using DM APIs
- Enable CONFIG_MISC_INIT_R to do the PCI initialization and
address map
- Drop unnecessary ad-hoc config macros
- Remove board_eth_init() in the board codes
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:42 +0000 (17:22 +0800)]
pci: mpc85xx: Support 64-bit bus and cpu address
At present the driver only supports 32-bit bus and cpu address.
The controller's outbound registers/fields for extended address
are not programmed. Let's program them to support 64-bit bus and
cpu address.
Bin Meng [Thu, 25 Feb 2021 09:22:41 +0000 (17:22 +0800)]
pci: mpc85xx: Support controller register physical address beyond 32-bit
devfdt_get_addr_index() returns fdt_addr_t which might be a 64-bit
physical address. Use map_physmem() to return the virtual address
that can be used by a 32-bit machine.
Bin Meng [Thu, 25 Feb 2021 09:22:40 +0000 (17:22 +0800)]
pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW
For the QEMU ppce500 machine, LAW registers are not implemented
hence CONFIG_FSL_LAW is not turned on and all LAW APIs are not
available. We should wrap all LAW registers programming in the
mpc85xx PCI driver with CONFIG_FSL_LAW.
Bin Meng [Thu, 25 Feb 2021 09:22:38 +0000 (17:22 +0800)]
common: Move initr_addr_map() to a bit earlier
At present initr_addr_map() is put at a late stage in the
init_sequence_r[] calls. This won't work because lot of
device driver initialization (e.g.: serial port) happens
before it but is lack of the address translation support.
This moves the call to a bit earlier, right after the DM
initialization.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:37 +0000 (17:22 +0800)]
ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase
In phys_to_virt() and virt_to_phys(), if CONFIG_ADDR_MAP is defined,
they use addrmap_ translation APIs to do the address translation.
However these APIs only work in post-relocation phase.
Update the code logic to fall back to use the default one when in
pre-relocation phase.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:33 +0000 (17:22 +0800)]
lib: addr_map: Move address_map[] type to the header file
At present address_map[] is static and its type is unknown to external
modules. In preparation to create a command to list its contents, this
patch moves its type definition and declaration to the header file.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:30 +0000 (17:22 +0800)]
ppc: qemu: Enable OF_CONTROL
The QEMU ppce500 machine generates a device tree blob and passes
it to U-Boot during boot. Let's enable OF_CONTROL with OF_BOARD
and provide board_fdt_blob_setup() in the board codes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:26 +0000 (17:22 +0800)]
ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END
CONFIG_SYS_PCI_MAP_END currently points to 0xe8000000, which means
the upper end of the virtual address mapped to PCI bus address ends
at 0xe8000000. But this is wrong as the CCSBAR was already mapped
at 0xe0000000 with a 1 MiB size.
Bin Meng [Thu, 25 Feb 2021 09:22:25 +0000 (17:22 +0800)]
ppc: qemu: Support non-identity PCI bus address
When QEMU originally supported the ppce500 machine back in Jan 2014,
it was created with a 1:1 mapping of PCI bus address. Things seemed
to change rapidly that in Nov 2014 with the following QEMU commits:
commit e6b4e5f4795b ("PPC: e500: Move CCSR and MMIO space to upper end of address space")
and
commit cb3778a0455a ("PPC: e500 pci host: Add support for ATMUs")
the PCI memory and IO physical address were moved to beyond 4 GiB,
but PCI bus address remained below 4 GiB, hence a non-identity
mapping was created. Unfortunately corresponding U-Boot updates
were missed along with the QEMU changes and the U-Boot QEMU ppce500
PCI support has been broken since then.
This commit makes the PCI (non-DM version) work again.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:24 +0000 (17:22 +0800)]
common: fdt_support: Support special case of PCI address in fdt_read_prop()
At present fdt_read_prop() can only handle 1 or 2 cells. It is
called by fdt_read_range() which may be used to read PCI address
from <ranges> for a PCI bus node where the number of PCI address
cell is 3. The <ranges> property is an array of:
When trying to read <child address> from a PCI bus node using
fdt_read_prop(), as the codes below:
/* Read <child address> */
if (child_addr) {
r = fdt_read_prop(ranges, ranges_len, cell, child_addr,
acells);
if (r)
return r;
}
it will fail, because the PCI child address is made up of 3 cells
but fdt_read_prop() cannot handle it. We advance the cell offset
by 1 so that the <child address> can be correctly read.
This adds the special handling of such case.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Bin Meng [Thu, 25 Feb 2021 09:22:22 +0000 (17:22 +0800)]
pci: fsl_pci_init: Dynamically allocate the PCI regions
Commit e002474158d1 ("pci: pci-uclass: Dynamically allocate the PCI regions")
changes 'struct pci_controller'.regions from pre-allocated array of
regions to dynamically allocated, which unfortunately broken lots of
boards that still use the non-DM PCI driver.
This patch changes the non-DM fsl_pci_init driver to dynamically
allocate the regions, just like what's done in the pci uclass driver.
Fixes: e002474158d1 ("pci: pci-uclass: Dynamically allocate the PCI regions") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Michael Walle [Wed, 24 Feb 2021 16:40:42 +0000 (17:40 +0100)]
net: dsa: remove master santiy check
Because we probe the master ourselves (and fail if there is no master),
it is not possible that we don't have a master device.
There is one catch though: device removal. We don't support that. It
wasn't supported neither before this patch. Because the master device
was only set in .pre_probe(), if a device was removed master_dev was a
dangling pointer and transmitting a frame cause a panic. I don't see a
good solution without having some sort of notify machanism when a
udevice is removed.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> [DSA unit tests] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Michael Walle [Wed, 24 Feb 2021 16:40:41 +0000 (17:40 +0100)]
net: dsa: remove NULL check for priv and platform data
Because the uclass has the "*_auto" properties set, the driver model
will take care of allocating the private structures for us and they
can't be NULL. Drop the checks.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Michael Walle [Wed, 24 Feb 2021 16:40:40 +0000 (17:40 +0100)]
net: dsa: probe master device
DSA needs to have the master device probed first for MAC inheritance.
Until now, it only works by chance because the only user (LS1028A SoC)
will probe the master device first. The probe order is given by the PCI
device ordering, thus it works because the master device has a "smaller"
BDF then the switch device.
Explicitly probe the master device in dsa_port_probe().
Fixes: fc054d563bfb ("net: Introduce DSA class for Ethernet switches") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Michael Walle [Wed, 24 Feb 2021 16:40:39 +0000 (17:40 +0100)]
net: dsa: return early if there is no master
It doesn't make sense to have DSA without a master port. Error out early
if there is no master port.
Fixes: fc054d563bfb ("net: Introduce DSA class for Ethernet switches") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Stephen Carlson [Mon, 8 Feb 2021 10:11:29 +0000 (11:11 +0100)]
arm: fsl: common: Improve NXP VID driver PMBus support
This patch adds support for more PMBus compatible devices to the NXP
drivers for its QorIQ family devices. At runtime, the voltage regulator is
queried over I2C, and the required voltage multiplier determined. This
change supports the DIRECT and LINEAR PMBus voltage reporting modes.
Previously, the driver only supported a few specific devices such as the
IR36021 and LTC3882, so this change allows the QorIQ series to be used
with a much larger variety of core voltage regulator devices.
checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain
consistency with the existing code.
Pali Rohár [Wed, 3 Mar 2021 09:52:36 +0000 (10:52 +0100)]
fs/squashfs: Fix compilation error
Commit 401d1c4f5d2d29c4bc4beaec95402ca23eb63295 ("common: Drop
asm/global_data.h from common header") broke compilation of squashfs
filesystem when CONFIG_CMD_SQUASHFS=y is enabled.
Compilation is failing on error:
aarch64-linux-gnu-ld.bfd: u-boot/fs/squashfs/sqfs_inode.c:121: undefined reference to `le32_to_cpu'
Fixes: 401d1c4f5d2d29c4bc4beaec95402ca23eb63295 ("common: Drop asm/global_data.h from common header") Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Bin Meng [Wed, 3 Feb 2021 14:42:25 +0000 (22:42 +0800)]
serial: ns16550: Handle zero <clock-frequency> value
A working device tree node of ns16550 should never be populated
with value zero for the <clock-frequency> property. Unfortunately
this is the case for the QEMU ppce500 target.
Let's try to assign plat->clock to CONFIG_SYS_NS16550_CLK as the
last resort to handle such case.
This commit should be reverted when:
- The following QEMU patch [1] is merged, and
- U-Boot CI has upgraded its QEMU version that contains the fix
Bin Meng [Wed, 3 Feb 2021 13:22:40 +0000 (21:22 +0800)]
serial: ns16550: Correct the base address type
Currently ns16550_serial_assign_base() treats the argument 'base'
with type `ulong`. This is incorrect because the base address was
obtained from device tree with type `fdt_addr_t` that can represent
a physical address larger than 32-bit in a 32-bit system.
Fixes: 9e6ce62190b7 ("serial: ns16550: Fix ordering of getting base address") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Each invocation of the 'host bind' command with a file name argument opens
a file descriptor. The next invocation of the 'host bind' command destroys
the block device but the file descriptor remains open. The same holds true
for the 'unbind blk' command.
Close the file descriptor when unbinding the host block device.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Bernhard Kirchen [Fri, 29 Jan 2021 14:10:08 +0000 (15:10 +0100)]
fix patman --limit-cc option
patman's --limit-cc option parses its argument to an integer and uses
that to trim the list of CC recipients to a particular maximum. but that
only works if the cc variable is a list, which it is not.
Signed-off-by: Bernhard Kirchen <bernhard.kirchen@mbconnectline.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 3 Feb 2021 13:00:49 +0000 (06:00 -0700)]
bootstage: Fix dependency for BOOTSTAGE_RECORD_COUNT
At present these three Kconfigs exist even when bootstage is not enabled.
This is not necessary since bootstage.c is only built if BOOTSTAGE is
enabled.
Make them conditional. Also fix up the overflow message to mention TPL.
projects / u-boot.git / log
![3 years agolib: addr_map: Move address_map[] type to the header file](/img/static/git-logo.png?p=u-boot.git;a=commit;h=b56156331693856aceb76e6aa3d61e58f7ae8dd4){kind=link}
