From: Soeren Moch Date: Fri, 1 Mar 2019 12:10:55 +0000 (+0100) Subject: board: tbs2910: Add pinctrl driver and convert gpio to driver model X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=f0b427aca6ac502b92f0dc32ac2b99bd6bfea5ae;p=u-boot.git board: tbs2910: Add pinctrl driver and convert gpio to driver model We need this for additional driver model conversions. Signed-off-by: Soeren Moch --- diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index 99b282ca6b..175dd88a69 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -138,6 +138,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); /* Reset AR8035 PHY */ + gpio_request(IMX_GPIO_NR(1, 25), "ETH_PHY_RESET"); gpio_direction_output(IMX_GPIO_NR(1, 25) , 0); udelay(500); gpio_set_value(IMX_GPIO_NR(1, 25), 1); @@ -230,12 +231,14 @@ int board_mmc_init(bd_t *bis) case 0: imx_iomux_v3_setup_multiple_pads( usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + gpio_request(USDHC2_CD_GPIO, "MMC0_CD"); gpio_direction_input(USDHC2_CD_GPIO); usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); break; case 1: imx_iomux_v3_setup_multiple_pads( usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + gpio_request(USDHC3_CD_GPIO, "MMC1_CD"); gpio_direction_input(USDHC3_CD_GPIO); usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); break; diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 3cc68eb922..717cabfa3b 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -42,10 +42,13 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910" CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y CONFIG_DWC_AHSATA=y +CONFIG_DM_GPIO=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y