From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Fri, 8 Jan 2016 16:51:16 +0000 (+0900)
Subject: ARM: uniphier: fix recommended board setting in document
X-Git-Tag: v2025.01-rc5-pxa1908~10783
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=e69514cc7087255d0e9754a9bf04129309d81ed5;p=u-boot.git

ARM: uniphier: fix recommended board setting in document

The mem_is_flash() in arch/arm/mach-uniphier/micro-support_card.c
writes/reads the tail of each NOR flash bank to check if the device
really resides there.

If CS1_SPLIT were enabled, the support card would always require two
NOR flash devices to be inserted for the correct NOR detection.
This is not probably what we want.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/doc/README.uniphier b/doc/README.uniphier
index f0f5346f53..bce70cf5fe 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -119,7 +119,7 @@ The recommended bit switch settings are as follows:
 
  SW8    OFF(1)/ON(0)   Description
  ------------------------------------------
- bit 1    ---->        CS1_SPLIT
+ bit 1    <----        CS1_SPLIT
  bit 2    <----        CASE9_ON
  bit 3    <----        CASE10_ON
  bit 4  Don't Care     Reserve