From: Igal Liberman Date: Mon, 24 Apr 2017 15:45:28 +0000 (+0300) Subject: phy: marvell: cp110: add 5G XFI mode X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=b617a0d7b8b19cfd01c4dec6089886d3f897da5c;p=u-boot.git phy: marvell: cp110: add 5G XFI mode This patch adds the option to configure a comphy to 5G XFI mode. In order to configure the comphy to 5G XFI, update the comphy node in the device-tree: phy2 { phy-type = ; phy-speed = ; }; Signed-off-by: Igal Liberman Signed-off-by: Stefan Roese Reviewed-by: Stefan Roese --- diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 6a6083b322..056de83d15 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -1074,7 +1074,7 @@ static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed, } static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, - void __iomem *comphy_base) + void __iomem *comphy_base, u32 speed) { u32 mask, data, ret = 1; void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); @@ -1129,7 +1129,9 @@ static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, debug("stage: Comphy configuration\n"); /* set reference clock */ mask = HPIPE_MISC_ICP_FORCE_MASK; - data = 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; + data = (speed == PHY_SPEED_5_15625G) ? + (0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) : + (0x1 << HPIPE_MISC_ICP_FORCE_OFFSET); mask |= HPIPE_MISC_REFCLK_SEL_MASK; data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); @@ -1154,6 +1156,19 @@ static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + /* Transmitter/Receiver Speed Divider Force */ + if (speed == PHY_SPEED_5_15625G) { + mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK; + data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask); + } + /* Set analog paramters from ETP(HW) */ debug("stage: Analog paramters from ETP(HW)\n"); /* SERDES External Configuration 2 */ @@ -1165,10 +1180,15 @@ static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); /* 0xd-G1_Setting_0 */ - mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; - data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; - mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; - data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + if (speed == PHY_SPEED_5_15625G) { + mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + } else { + mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; + data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + } reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask); /* Genration 1 setting 2 (G1_Setting_2) */ mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK; @@ -1214,6 +1234,15 @@ static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, /* Genration 1 setting 3 (G1_Setting_3) */ mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK; data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET; + if (speed == PHY_SPEED_5_15625G) { + /* Force FFE (Feed Forward Equalization) to 5G */ + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK; + data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK; + data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK; + data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET; + } reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n"); @@ -1867,7 +1896,8 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, break; case PHY_TYPE_SFI: ret = comphy_sfi_power_up(lane, hpipe_base_addr, - comphy_base_addr); + comphy_base_addr, + ptr_comphy_map->speed); break; case PHY_TYPE_RXAUI0: case PHY_TYPE_RXAUI1: diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h index 1857ffd2f4..1e294fb8c0 100644 --- a/drivers/phy/marvell/comphy_hpipe.h +++ b/drivers/phy/marvell/comphy_hpipe.h @@ -300,6 +300,20 @@ #define HPIPE_PWR_CTR_SFT_RST_MASK \ (0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET) +#define HPIPE_SPD_DIV_FORCE_REG 0x154 +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET 8 +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK \ + (0x3 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET) +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET 10 +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK \ + (0x1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET) +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET 13 +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK \ + (0x3 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET) +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET 15 +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK \ + (0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET) + #define HPIPE_PLLINTP_REG1 0x150 #define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG 0x16C diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h index 5eb32ef684..0983116038 100644 --- a/include/dt-bindings/comphy/comphy_data.h +++ b/include/dt-bindings/comphy/comphy_data.h @@ -13,10 +13,11 @@ #define PHY_SPEED_3G 3 #define PHY_SPEED_3_125G 4 #define PHY_SPEED_5G 5 -#define PHY_SPEED_6G 6 -#define PHY_SPEED_6_25G 7 -#define PHY_SPEED_10_3125G 8 -#define PHY_SPEED_MAX 9 +#define PHY_SPEED_5_15625G 6 +#define PHY_SPEED_6G 7 +#define PHY_SPEED_6_25G 8 +#define PHY_SPEED_10_3125G 9 +#define PHY_SPEED_MAX 10 #define PHY_SPEED_INVALID 0xff #define PHY_TYPE_UNCONNECTED 0