From: Pali Rohár Date: Sat, 2 Apr 2022 22:17:00 +0000 (+0200) Subject: mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot size X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=a91998d8affc0405bafeade583204f66db81e252;p=u-boot.git mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot size In pre-PBL header is stored size of code which BootROM copies from SD card to L2/SRAM. This size has upper limit of L2 cache size. In most cases this is size of U-Boot SPL or size of L2 cache. Therefore this size in pre-PBL header cannot be used for determining size of proper U-Boot. So always use CONFIG_SYS_MMC_U_BOOT_SIZE for determining size of proper U-Boot which stored on SD card. Signed-off-by: Pali Rohár Reviewed-by: Priyanka Jain --- diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c index 109f558dca..b87597a88e 100644 --- a/drivers/mmc/fsl_esdhc_spl.c +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -79,7 +79,6 @@ void __noreturn mmc_boot(void) #ifdef CONFIG_FSL_CORENET offset = CONFIG_SYS_MMC_U_BOOT_OFFS; - code_len = CONFIG_SYS_MMC_U_BOOT_SIZE; #else blklen = mmc->read_bl_len; tmp_buf = malloc(blklen); @@ -135,18 +134,11 @@ void __noreturn mmc_boot(void) offset = (offset << 8) + val; } offset += CONFIG_SYS_MMC_U_BOOT_OFFS; - /* Get the code size from offset 0x48 */ - byte_num = 4; - code_len = 0; - for (i = 0; i < byte_num; i++) { - val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i); - code_len = (code_len << 8) + val; - } - code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS; +#endif /* * Load U-Boot image from mmc into RAM */ -#endif + code_len = CONFIG_SYS_MMC_U_BOOT_SIZE; blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len; err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,