From: Patrick Delaunay Date: Mon, 15 Nov 2021 14:32:29 +0000 (+0100) Subject: stm32mp1: ram: remove the support of calibration result X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=9819fe345cc9de8ab1ca8c53999b5d460a8d0e7d;p=u-boot.git stm32mp1: ram: remove the support of calibration result The support of a predefined DDR PHY tuning result is removed for STM32MP1 driver because it is not needed at the supported frequency when built-in calibration is executed. The calibration parameters were provided in the device tree by the optional node "st,phy-cal", activated in ddr helper file by the compilation flag DDR_PHY_CAL_SKIP and filled with values generated by the CubeMX DDR utilities. This patch - updates the binding file to remove "st,phy-cal" support - updates the device trees and remove the associated defines - simplifies the STM32MP1 DDR driver and remove the support of the optional parameter "st,phy-cal" After this patch, the built-in calibration is always executed and the calibration registers are moved in the phy dynamic part; that allows manual tests. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 2a139c54e9..0aac9131a6 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -116,24 +116,6 @@ DDR_MR3 >; -#ifdef DDR_PHY_CAL_SKIP - st,phy-cal = < - DDR_DX0DLLCR - DDR_DX0DQTR - DDR_DX0DQSTR - DDR_DX1DLLCR - DDR_DX1DQTR - DDR_DX1DQSTR - DDR_DX2DLLCR - DDR_DX2DQTR - DDR_DX2DQSTR - DDR_DX3DLLCR - DDR_DX3DQTR - DDR_DX3DQSTR - >; - -#endif - status = "okay"; }; }; @@ -224,18 +206,6 @@ #undef DDR_ODTCR #undef DDR_ZQ0CR1 #undef DDR_DX0GCR -#undef DDR_DX0DLLCR -#undef DDR_DX0DQTR -#undef DDR_DX0DQSTR #undef DDR_DX1GCR -#undef DDR_DX1DLLCR -#undef DDR_DX1DQTR -#undef DDR_DX1DQSTR #undef DDR_DX2GCR -#undef DDR_DX2DLLCR -#undef DDR_DX2DQTR -#undef DDR_DX2DQSTR #undef DDR_DX3GCR -#undef DDR_DX3DLLCR -#undef DDR_DX3DQTR -#undef DDR_DX3DQSTR diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index 978331b279..e60d0ae606 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE80 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE80 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 426be21f42..1a6fa80edf 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi index b3eb280f96..0a277cd675 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi index ed3a5248f8..92774fffb9 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi index d5813d64b0..e53ab18a69 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi index 24c81269b0..ff582ac6af 100644 --- a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt index ac6a7df432..926e3e83b3 100644 --- a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt +++ b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt @@ -128,23 +128,6 @@ phyc attributes: MR2 MR3 -- st,phy-cal : phy cal depending of calibration or tuning of DDR - This parameter is optional; when it is absent the built-in PHY - calibration is done. - for STM32MP15x: 12 values are requested in this order - DX0DLLCR - DX0DQTR - DX0DQSTR - DX1DLLCR - DX1DQTR - DX1DQSTR - DX2DLLCR - DX2DQTR - DX2DQSTR - DX3DLLCR - DX3DQTR - DX3DQSTR - Example: / { @@ -280,21 +263,6 @@ Example: 0x00000000 /*MR3*/ >; - st,phy-cal = < - 0x40000000 /*DX0DLLCR*/ - 0xFFFFFFFF /*DX0DQTR*/ - 0x3DB02000 /*DX0DQSTR*/ - 0x40000000 /*DX1DLLCR*/ - 0xFFFFFFFF /*DX1DQTR*/ - 0x3DB02000 /*DX1DQSTR*/ - 0x40000000 /*DX2DLLCR*/ - 0xFFFFFFFF /*DX2DQTR*/ - 0x3DB02000 /*DX2DQSTR*/ - 0x40000000 /*DX3DLLCR*/ - 0xFFFFFFFF /*DX3DQTR*/ - 0x3DB02000 /*DX3DQSTR*/ - >; - status = "okay"; }; }; diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 1f8422518b..9d086601a4 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -68,7 +68,6 @@ struct reg_desc { #define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */ #define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */ -#define DDRPHY_REG_CAL_SIZE 12 /* st,phy-cal */ #define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg) static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = { @@ -178,22 +177,6 @@ static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = { DDRPHY_REG_TIMING(mr3), }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) -static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = { - DDRPHY_REG_CAL(dx0dllcr), - DDRPHY_REG_CAL(dx0dqtr), - DDRPHY_REG_CAL(dx0dqstr), - DDRPHY_REG_CAL(dx1dllcr), - DDRPHY_REG_CAL(dx1dqtr), - DDRPHY_REG_CAL(dx1dqstr), - DDRPHY_REG_CAL(dx2dllcr), - DDRPHY_REG_CAL(dx2dqtr), - DDRPHY_REG_CAL(dx2dqstr), - DDRPHY_REG_CAL(dx3dllcr), - DDRPHY_REG_CAL(dx3dqtr), - DDRPHY_REG_CAL(dx3dqstr), -}; - /************************************************************** * DYNAMIC REGISTERS: only used for debug purpose (read/modify) **************************************************************/ @@ -218,12 +201,24 @@ static const struct reg_desc ddrphy_dyn[] = { DDRPHY_REG_DYN(zq0sr1), DDRPHY_REG_DYN(dx0gsr0), DDRPHY_REG_DYN(dx0gsr1), + DDRPHY_REG_DYN(dx0dllcr), + DDRPHY_REG_DYN(dx0dqtr), + DDRPHY_REG_DYN(dx0dqstr), DDRPHY_REG_DYN(dx1gsr0), DDRPHY_REG_DYN(dx1gsr1), + DDRPHY_REG_DYN(dx1dllcr), + DDRPHY_REG_DYN(dx1dqtr), + DDRPHY_REG_DYN(dx1dqstr), DDRPHY_REG_DYN(dx2gsr0), DDRPHY_REG_DYN(dx2gsr1), + DDRPHY_REG_DYN(dx2dllcr), + DDRPHY_REG_DYN(dx2dqtr), + DDRPHY_REG_DYN(dx2dqstr), DDRPHY_REG_DYN(dx3gsr0), DDRPHY_REG_DYN(dx3gsr1), + DDRPHY_REG_DYN(dx3dllcr), + DDRPHY_REG_DYN(dx3dqtr), + DDRPHY_REG_DYN(dx3dqstr), }; #define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn) @@ -240,7 +235,6 @@ enum reg_type { REG_MAP, REGPHY_REG, REGPHY_TIMING, - REGPHY_CAL, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE /* dynamic registers => managed in driver or not changed, * can be dumped in interactive mode @@ -264,8 +258,6 @@ struct ddr_reg_info { enum base_type base; }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) - const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { [REG_REG] = { "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE}, @@ -279,8 +271,6 @@ const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE}, [REGPHY_TIMING] = { "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE}, -[REGPHY_CAL] = { - "cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE}, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE [REG_DYN] = { "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE}, @@ -456,9 +446,6 @@ static u32 get_par_addr(const struct stm32mp1_ddr_config *config, case REGPHY_TIMING: par_addr = (u32)&config->p_timing; break; - case REGPHY_CAL: - par_addr = (u32)&config->p_cal; - break; case REG_DYN: case REGPHY_DYN: case REG_TYPE_NB: @@ -774,8 +761,6 @@ start: */ set_reg(priv, REGPHY_REG, &config->p_reg); set_reg(priv, REGPHY_TIMING, &config->p_timing); - if (config->p_cal_present) - set_reg(priv, REGPHY_CAL, &config->p_cal); if (INTERACTIVE(STEP_PHY_INIT)) goto start; @@ -810,36 +795,32 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); - if (config->p_cal_present) { - log_debug("DDR DQS training skipped.\n"); - } else { - log_debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 * - DFIMISC.dfiinit_complete_en = 0 */ - stm32mp1_refresh_disable(priv->ctl); + stm32mp1_refresh_disable(priv->ctl); /* 9. Program PUBL PGCR to enable refresh during training and rank to train * not done => keep the programed value in PGCR */ /* 10. configure PUBL PIR register to specify which training step to run */ - /* RVTRN is excuted only on LPDDR2/LPDDR3 */ - if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) - pir = DDRPHYC_PIR_QSTRN; - else - pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; - stm32mp1_ddrphy_init(priv->phy, pir); + /* RVTRN is excuted only on LPDDR2/LPDDR3 */ + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + pir = DDRPHYC_PIR_QSTRN; + else + pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; + stm32mp1_ddrphy_init(priv->phy, pir); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ - ddrphy_idone_wait(priv->phy); + ddrphy_idone_wait(priv->phy); /* 12. set back registers in step 8 to the orginal values if desidered */ - stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, - config->c_reg.pwrctl); - } /* if (config->p_cal_present) */ + stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, + config->c_reg.pwrctl); /* enable uMCTL2 AXI port 0 and 1 */ setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h index 4998f04439..3bfcb85a8f 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h @@ -140,21 +140,6 @@ struct stm32mp1_ddrphy_timing { u32 mr3; }; -struct stm32mp1_ddrphy_cal { - u32 dx0dllcr; - u32 dx0dqtr; - u32 dx0dqstr; - u32 dx1dllcr; - u32 dx1dqtr; - u32 dx1dqstr; - u32 dx2dllcr; - u32 dx2dqtr; - u32 dx2dqstr; - u32 dx3dllcr; - u32 dx3dqtr; - u32 dx3dqstr; -}; - struct stm32mp1_ddr_info { const char *name; u32 speed; /* in kHZ */ @@ -169,8 +154,6 @@ struct stm32mp1_ddr_config { struct stm32mp1_ddrctrl_perf c_perf; struct stm32mp1_ddrphy_reg p_reg; struct stm32mp1_ddrphy_timing p_timing; - struct stm32mp1_ddrphy_cal p_cal; - bool p_cal_present; }; int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed); diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index 8c2310ac90..a667d49cff 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -111,7 +111,7 @@ static void stm32mp1_do_usage(void) "help displays help\n" "info displays DDR information\n" "info changes DDR information\n" - " with = step, name, size, speed or cal\n" + " with = step, name, size or speed\n" "freq displays the DDR PHY frequency in kHz\n" "freq changes the DDR PHY frequency\n" "param [type|reg] prints input parameters\n" @@ -132,7 +132,7 @@ static void stm32mp1_do_usage(void) "\nwith for [type|reg]:\n" " all registers if absent\n" " = ctl, phy\n" - " or one category (static, timing, map, perf, cal, dyn)\n" + " or one category (static, timing, map, perf, dyn)\n" " = name of the register\n" }; @@ -165,7 +165,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, printf("name = %s\n", config->info.name); printf("size = 0x%x\n", config->info.size); printf("speed = %d kHz\n", config->info.speed); - printf("cal = %d\n", config->p_cal_present); return; } @@ -214,16 +213,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, } return; } - if (!strcmp(argv[1], "cal")) { - if (strict_strtoul(argv[2], 10, &value) < 0 || - (value != 0 && value != 1)) { - printf("invalid value %s\n", argv[2]); - } else { - config->p_cal_present = value; - printf("cal = %d\n", config->p_cal_present); - } - return; - } printf("argument %s invalid\n", argv[1]); } diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index 98fa1f4f11..3b65269b98 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -95,26 +95,22 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) { .name = x, \ .offset = offsetof(struct stm32mp1_ddr_config, y), \ .size = sizeof(config.y) / sizeof(u32), \ - .present = z, \ } #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL) #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL) -#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present) const struct { const char *name; /* name in DT */ const u32 offset; /* offset in config struct */ const u32 size; /* size of parameters */ - bool * const present; /* presence indication for opt */ } param[] = { CTL_PARAM(reg), CTL_PARAM(timing), CTL_PARAM(map), CTL_PARAM(perf), PHY_PARAM(reg), - PHY_PARAM(timing), - PHY_PARAM_OPT(cal) + PHY_PARAM(timing) }; config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0); @@ -133,25 +129,11 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) param[idx].size); dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__, param[idx].name, param[idx].size, ret); - if (ret && - (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { + if (ret) { dev_err(dev, "Cannot read %s, error=%d\n", param[idx].name, ret); return -EINVAL; } - if (param[idx].present) { - /* save presence of optional parameters */ - *param[idx].present = true; - if (ret == -FDT_ERR_NOTFOUND) { - *param[idx].present = false; -#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE - /* reset values if used later */ - memset((void *)((u32)&config + - param[idx].offset), - 0, param[idx].size * sizeof(u32)); -#endif - } - } } ret = clk_get_by_name(dev, "axidcg", &axidcg);