From: Patrick Delaunay Date: Mon, 11 Oct 2021 07:52:48 +0000 (+0200) Subject: arm: stm32mp: bsec: Update OTP shadow registers in SPL X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=9788708f030b20ecb07b718d07fb98e3bae66cb0;p=u-boot.git arm: stm32mp: bsec: Update OTP shadow registers in SPL Currently the upper OTP (after 57) are shadowed in U-Boot proper, when TFABOOT is not used. This choice cause an issue when U-Boot is not executed after SPL, so this BSEC initialization is moved in SPL and no more executed in U-Boot, so it is still executed only one time. After this patch this BSEC initialization is done in FSBL: SPL or TF-A. To force this initialization in all the case, the probe of the BSEC driver is forced in SPL in the arch st32mp function: spl_board_init(). Even if today BSEC driver is already probed in STM32MP15x clock driver clk_stm32mp1.c because get_cpu_type() is called in stm32mp1_get_max_opp_freq() function. Reported-by: Alexandru Gagniuc Signed-off-by: Patrick Delaunay --- diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index fe39bd80cf..e517acdd01 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -503,10 +503,9 @@ static int stm32mp_bsec_probe(struct udevice *dev) /* * update unlocked shadow for OTP cleared by the rom code - * only executed in U-Boot proper when TF-A is not used + * only executed in SPL, it is done in TF-A for TFABOOT */ - - if (!IS_ENABLED(CONFIG_TFABOOT) && !IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_SPL_BUILD)) { plat = dev_get_plat(dev); for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++) diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index eb79f3ffd2..0263ffe96a 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -174,7 +174,15 @@ static void dbgmcu_init(void) void spl_board_init(void) { + struct udevice *dev; + int ret; + dbgmcu_init(); + + /* force probe of BSEC driver to shadow the upper OTP */ + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev); + if (ret) + log_warning("BSEC probe failed: %d\n", ret); } #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */