From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Date: Tue, 9 Apr 2019 15:24:16 +0000 (+0200)
Subject: colibri-imx6ull: migrate usb to using driver model
X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=87b32297f5c4c64cfece377eb5ce936d8b16d0f4;p=u-boot.git

colibri-imx6ull: migrate usb to using driver model

Migrate USB to using driver model.
Add USBH_PEN GPIO regulator.
While at it also add alias e.g. as required for UMS.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---

diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 0d416ebd10..91e48aab61 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -13,6 +13,7 @@
 
 	aliases {
 		mmc0 = &usdhc1;
+		usb0 = &usbotg1; /* required for ums */
 	};
 
 	chosen {
@@ -35,6 +36,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
 		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -47,6 +55,17 @@
 		states = <1800000 0x1 3300000 0x0>;
 		vin-supply = <&reg_module_3v3>;
 	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+		vin-supply = <&reg_5v0>;
+	};
 };
 
 &adc1 {
@@ -183,15 +202,20 @@
 	fsl,dte-mode;
 };
 
+/* Colibri USBC */
 &usbotg1 {
 	dr_mode = "otg";
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	status = "okay";
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
 };
 
 /* Colibri MMC */
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index c9af44e30e..21addaf6ed 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -24,8 +24,6 @@
 #include <miiphy.h>
 #include <mtd_node.h>
 #include <netdev.h>
-#include <usb.h>
-#include <usb/ehci-ci.h>
 
 #include "../common/tdx-common.h"
 #include "../common/tdx-cfg-block.h"
@@ -41,8 +39,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
 
-#define USB_CDET_GPIO	IMX_GPIO_NR(7, 14)
-
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -50,10 +46,6 @@ int dram_init(void)
 	return 0;
 }
 
-static iomux_v3_cfg_t const usb_cdet_pads[] = {
-	MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
 #ifdef CONFIG_NAND_MXS
 static void setup_gpmi_nand(void)
 {
@@ -163,11 +155,6 @@ int board_init(void)
 	setup_lcd();
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-	imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads));
-	gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
-#endif
-
 	return 0;
 }
 
@@ -241,41 +228,6 @@ int ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
-		MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_ehci_hcd_init(int port)
-{
-	switch (port) {
-	case 0:
-		break;
-	case 1:
-		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
-						 ARRAY_SIZE(usb_otg2_pads));
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int board_usb_phy_mode(int port)
-{
-	switch (port) {
-	case 0:
-		if (gpio_get_value(USB_CDET_GPIO))
-			return USB_INIT_DEVICE;
-		else
-			return USB_INIT_HOST;
-	case 1:
-	default:
-		return USB_INIT_HOST;
-	}
-}
-#endif
-
 static struct mxc_serial_platdata mxc_serial_plat = {
 	.reg = (struct mxc_uart *)UART1_BASE,
 	.use_dte = 1,
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 69305323f2..0440b4ed94 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -71,6 +71,7 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Toradex"
 CONFIG_USB_GADGET_VENDOR_NUM=0x1b67