From: Nicolas Saenz Julienne Date: Thu, 14 Jan 2021 15:49:01 +0000 (+0100) Subject: pci: brcmstb: Cleanup controller state before handover X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=85f3fddbcc2e8282f1c26dcef4684f59490d47ba;p=u-boot.git pci: brcmstb: Cleanup controller state before handover Make sure we handover the PCIe controller in a clean state. Some of the devices hanging from the PCIe bus might need to be properly reset through #PERST in order for Linux to be able to initialize them. This is specially important in order to properly initialize Raspberry Pi 4 B and 400's USB chip. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Matthias Brugger --- diff --git a/drivers/pci/pcie_brcmstb.c b/drivers/pci/pcie_brcmstb.c index dd2a4ef629..54aa02c809 100644 --- a/drivers/pci/pcie_brcmstb.c +++ b/drivers/pci/pcie_brcmstb.c @@ -579,6 +579,24 @@ static int brcm_pcie_probe(struct udevice *dev) return 0; } +static int brcm_pcie_remove(struct udevice *dev) +{ + struct brcm_pcie *pcie = dev_get_priv(dev); + void __iomem *base = pcie->base; + + /* Assert fundamental reset */ + setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_PERST_MASK); + + /* Turn off SerDes */ + setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG, + PCIE_HARD_DEBUG_SERDES_IDDQ_MASK); + + /* Shutdown bridge */ + setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK); + + return 0; +} + static int brcm_pcie_of_to_plat(struct udevice *dev) { struct brcm_pcie *pcie = dev_get_priv(dev); @@ -618,6 +636,8 @@ U_BOOT_DRIVER(pcie_brcm_base) = { .ops = &brcm_pcie_ops, .of_match = brcm_pcie_ids, .probe = brcm_pcie_probe, + .remove = brcm_pcie_remove, .of_to_plat = brcm_pcie_of_to_plat, .priv_auto = sizeof(struct brcm_pcie), + .flags = DM_FLAG_OS_PREPARE, };