From: Aleksandar Gerasimovski Date: Tue, 16 Nov 2021 12:51:47 +0000 (+0000) Subject: km/ls102xa: dbg phy prst depends on piggy presence X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=70003e52f4ed9b22a75ac4d084ceee65d9b14ea1;p=u-boot.git km/ls102xa: dbg phy prst depends on piggy presence The PHY for the debug interface was placed on the board for the pg_wcom_ls102x. Hence only when a piggy is plugged, a RJ45 jack including magnetics is connected to the MDI of the PHY. Without a piggy the MDI lines are left floating and it does not make sense to have an active debug PHY. In case of expu1 an active PHY without a piggy even led to increased jitter for syncE. This patch only deactivates the prst line of the debug PHY when a piggy is detected persent. Signed-off-by: Rainer Boschung Signed-off-by: Aleksandar Gerasimovski Reviewed-by: Priyanka Jain --- diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c index 2be2b64df5..cff18dcd63 100644 --- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c +++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c @@ -91,8 +91,10 @@ int board_early_init_f(void) qrio_prstcfg(WCOM_CLIPS_RST, PRSTCFG_POWUP_UNIT_RST); qrio_prst(WCOM_CLIPS_RST, false, false); #endif + + /* deasset debug phy reset only if piggy is present */ qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST); - qrio_prst(KM_DBG_ETH_RST, false, false); + qrio_prst(KM_DBG_ETH_RST, !qrio_get_pgy_pres_pin(), false); i2c_deblock_gpio_cfg();