From: Fabio Estevam Date: Fri, 19 Jul 2024 20:33:11 +0000 (-0300) Subject: udoo-neo: Convert to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=5c045a51a43b36020d8df21ed398e3c0bc87ffef;p=u-boot.git udoo-neo: Convert to OF_UPSTREAM Instead of using the local imx6sx-udoo-neo devicetree copies from U-Boot, convert the imx6sx-udoo-neo boards to OF_UPSTREAM so that the upstream kernel devicetrees can be used instead. Tested on a imx6sx-udoo-neo-full board. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7265e55425..a4d95c8306 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -840,10 +840,7 @@ dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb dtb-$(CONFIG_MX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb.dtb \ - imx6sx-softing-vining-2000.dtb \ - imx6sx-udoo-neo-basic.dtb \ - imx6sx-udoo-neo-extended.dtb \ - imx6sx-udoo-neo-full.dtb + imx6sx-softing-vining-2000.dtb dtb-$(CONFIG_MX6UL) += \ imx6ul-geam.dtb \ diff --git a/arch/arm/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/dts/imx6sx-udoo-neo-basic.dts deleted file mode 100644 index 205ea26484..0000000000 --- a/arch/arm/dts/imx6sx-udoo-neo-basic.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - */ - -/dts-v1/; - -#include "imx6sx-udoo-neo.dtsi" - -/ { - model = "UDOO Neo Basic"; - compatible = "udoo,neobasic", "fsl,imx6sx"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; -}; - -&fec1 { - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; diff --git a/arch/arm/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/dts/imx6sx-udoo-neo-extended.dts deleted file mode 100644 index 5817b49853..0000000000 --- a/arch/arm/dts/imx6sx-udoo-neo-extended.dts +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - */ - -/dts-v1/; - -#include "imx6sx-udoo-neo.dtsi" - -/ { - model = "UDOO Neo Extended"; - compatible = "udoo,neoextended", "fsl,imx6sx"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; -}; - -&i2c4 { /* Onboard Motion sensors */ - status = "okay"; -}; - -&uart3 { /* Bluetooth */ - status = "okay"; -}; diff --git a/arch/arm/dts/imx6sx-udoo-neo-full.dts b/arch/arm/dts/imx6sx-udoo-neo-full.dts deleted file mode 100644 index 96f4d89848..0000000000 --- a/arch/arm/dts/imx6sx-udoo-neo-full.dts +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - */ - -/dts-v1/; - -#include "imx6sx-udoo-neo.dtsi" - -/ { - model = "UDOO Neo Full"; - compatible = "udoo,neofull", "fsl,imx6sx"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; -}; - -&fec1 { - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - -&i2c4 { /* Onboard Motion sensors */ - status = "okay"; -}; - -&uart3 { /* Bluetooth */ - status = "okay"; -}; diff --git a/arch/arm/dts/imx6sx-udoo-neo.dtsi b/arch/arm/dts/imx6sx-udoo-neo.dtsi deleted file mode 100644 index c84ea1fac5..0000000000 --- a/arch/arm/dts/imx6sx-udoo-neo.dtsi +++ /dev/null @@ -1,482 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - */ - -#include "imx6sx.dtsi" - -/ { - compatible = "fsl,imx6sx"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "udoo-neo:red:mmc"; - gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc0"; - }; - - orange { - label = "udoo-neo:orange:user"; - gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; - - reg_sdio_pwr: regulator-sdio-pwr { - compatible = "regulator-fixed"; - gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-name = "SDIO_PWR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_otg1_reg>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_otg2_reg>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_wlan: regulator-wlan { - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-reset-duration = <10>; - phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clock-frequency = <100000>; - status = "okay"; - - pmic: pmic@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1a { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen2_reg: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c2 { /* Brick snap in sensors connector */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; - status = "okay"; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; - status = "okay"; - - hdmi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>; - - ports { - port { - hdmi: endpoint { - remote-endpoint = <&lcdc>; - }; - }; - }; - }; -}; - -&i2c4 { /* Onboard Motion sensors */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - clock-frequency = <100000>; - status = "disabled"; -}; - -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - status = "okay"; - - port { - lcdc: endpoint { - remote-endpoint = <&hdmi>; - }; - }; -}; - -&iomuxc { - pinctrl_bt_reg: btreggrp { - fsl,pins = - ; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = - , - , - , - , - , - , - - , - , - , - , - , - , - - ; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = - , - ; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = - , - ; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = - , - ; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = - , - ; - }; - - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = - , - ; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = - , - ; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = - , - , - , - ; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = - , - ; - }; - - pinctrl_uart6: uart6grp { - fsl,pins = - , - , - , - , - , - , - , - ; - }; - - pinctrl_otg1_reg: otg1grp { - fsl,pins = - ; - }; - - pinctrl_otg2_reg: otg2grp { - fsl,pins = - ; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = - , - ; - }; - - pinctrl_usb_otg2: usbot2ggrp { - fsl,pins = - ; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = - , - , - , - , - , - , - ; /* CD */ - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = - , - , - , - , - , - , - , - , - ; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -/* Cortex-M4 serial */ -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "disabled"; -}; - -&uart3 { /* Bluetooth - only on Extended/Full versions */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "disabled"; - - bluetooth { - compatible = "ti,wl1831-st"; - enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - max-speed = <921600>; - }; -}; - -/* Arduino serial */ -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "disabled"; -}; - -&uart6 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart6>; - uart-has-rtscts; - status = "disabled"; -}; - -&usbotg1 { /* J2 micro USB port */ - vbus-supply = <®_usb_otg1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - status = "okay"; -}; - -&usbotg2 { /* J3 host USB port */ - vbus-supply = <®_usb_otg2_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_sdio_pwr>; - bus-width = <4>; - cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; - no-1-8-v; - keep-power-in-suspend; - wakeup-source; - status = "okay"; -}; - -&usdhc3 { /* Wi-Fi */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; - vmmc-supply = <®_wlan>; - cap-power-off-card; - wakeup-source; - keep-power-in-suspend; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wlcore: wlcore@2 { - compatible = "ti,wl1831"; - reg = <2>; - interrupt-parent = <&gpio2>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; - ref-clock-frequency = <38400000>; - tcxo-clock-frequency = <26000000>; - }; -}; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 7800553ae8..bee9d5f487 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -636,6 +636,7 @@ config TARGET_UDOO_NEO select DM_THERMAL select SUPPORT_SPL imply CMD_DM + imply OF_UPSTREAM config TARGET_SOFTING_VINING_2000 bool "Softing VIN|ING 2000" diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig index 826d5a1150..0c76b00555 100644 --- a/configs/udoo_neo_defconfig +++ b/configs/udoo_neo_defconfig @@ -11,7 +11,7 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_MX6SX=y CONFIG_TARGET_UDOO_NEO=y CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx6sx-udoo-neo-basic" +CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6sx-udoo-neo-basic" CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SYS_MONITOR_LEN=409600 CONFIG_SPL_MMC=y