From: Quentin Schulz Date: Thu, 4 Jul 2024 12:53:33 +0000 (+0200) Subject: rockchip: tiger-rk3588: add PCIe support X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=5670a90a0c9ed6c79128ec240115dbddbd05faee;p=u-boot.git rockchip: tiger-rk3588: add PCIe support This enables PCIe support on Tiger as exposed on Q7_PCIE[0123]_[RT]X_[PN] signals and more specifically on the `PCI Express` connector on the Haikou devkit. This was tested with a PCIe to NVMe adapter (e.g. https://www.amazon.de/dp/B07RZZ3TJG). Signed-off-by: Quentin Schulz Reviewed-by: Heiko Stuebner Tested-by: Heiko Stuebner Reviewed-by: Kever Yang --- diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig index 8fcdd063a3..8eb1027e44 100644 --- a/configs/tiger-rk3588_defconfig +++ b/configs/tiger-rk3588_defconfig @@ -14,6 +14,7 @@ CONFIG_DEBUG_UART_BASE=0xfeb50000 CONFIG_DEBUG_UART_CLOCK=24000000 # CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -41,6 +42,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SF is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -89,6 +91,8 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y CONFIG_PHY_ROCKCHIP_USBDP=y