From: Simon Glass Date: Fri, 27 Nov 2015 02:51:30 +0000 (-0700) Subject: dm: pci: Disable PCI compatibility functions by default X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=3ba5f74a541f77bfb6904e684e2cf0bfad005106;p=u-boot.git dm: pci: Disable PCI compatibility functions by default We eventually need to drop the compatibility functions for driver model. As a first step, create a configuration option to enable them and hide them when the option is disabled. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 8db07081ff..fbfb204e6e 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,6 +7,7 @@ config TEGRA_COMMON select DM_I2C select DM_KEYBOARD select DM_PCI + select DM_PCI_COMPAT select DM_SERIAL select DM_SPI select DM_SPI_FLASH diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 16ba4f438c..7e7cb612d7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -93,6 +93,9 @@ config SYS_X86_START16 depends on X86_RESET_VECTOR default 0xfffff800 +config DM_PCI_COMPAT + default y # Until we finish moving over to the new API + config BOARD_ROMSIZE_KB_512 bool config BOARD_ROMSIZE_KB_1024 diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index c4e1be3234..fb1b09fcf2 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -49,6 +49,7 @@ CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y CONFIG_PINCTRL=y CONFIG_PINCONF=y diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index c219c19679..26aa2b0930 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -9,6 +9,15 @@ config DM_PCI available PCI devices, allows scanning of PCI buses and provides device configuration support. +config DM_PCI_COMPAT + bool "Enable compatible functions for PCI" + depends on DM_PCI + help + Enable compatibility functions for PCI so that old code can be used + with CONFIG_DM_PCI enabled. This should be used as an interim + measure when porting a board to use driver model for PCI. Once the + board is fully supported, this option should be disabled. + config PCI_SANDBOX bool "Sandbox PCI support" depends on SANDBOX && DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 1f8f86f803..6b761b453d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -6,7 +6,8 @@ # ifneq ($(CONFIG_DM_PCI),) -obj-$(CONFIG_PCI) += pci-uclass.o pci_compat.o +obj-$(CONFIG_PCI) += pci-uclass.o +obj-$(CONFIG_DM_PCI_COMPAT) += pci_compat.o obj-$(CONFIG_PCI_SANDBOX) += pci_sandbox.o obj-$(CONFIG_SANDBOX) += pci-emul-uclass.o obj-$(CONFIG_X86) += pci_x86.o diff --git a/include/pci.h b/include/pci.h index c4f657784b..2adca850b4 100644 --- a/include/pci.h +++ b/include/pci.h @@ -656,6 +656,7 @@ extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose, pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags)) /* For driver model these are defined in macros in pci_compat.c */ +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) extern int pci_hose_read_config_byte(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); extern int pci_hose_read_config_word(struct pci_controller *hose, @@ -668,6 +669,7 @@ extern int pci_hose_write_config_word(struct pci_controller *hose, pci_dev_t dev, int where, u16 val); extern int pci_hose_write_config_dword(struct pci_controller *hose, pci_dev_t dev, int where, u32 val); +#endif #ifndef CONFIG_DM_PCI extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val); @@ -678,6 +680,13 @@ extern int pci_write_config_word(pci_dev_t dev, int where, u16 val); extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val); #endif +void pciauto_region_init(struct pci_region *res); +void pciauto_region_align(struct pci_region *res, pci_size_t size); +void pciauto_config_init(struct pci_controller *hose); +int pciauto_region_allocate(struct pci_region *res, pci_size_t size, + pci_addr_t *bar); + +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose, @@ -696,9 +705,6 @@ extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev); extern int pci_hose_scan(struct pci_controller *hose); extern int pci_hose_scan_bus(struct pci_controller *hose, int bus); -extern void pciauto_region_init(struct pci_region* res); -extern void pciauto_region_align(struct pci_region *res, pci_size_t size); -extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar); extern void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, @@ -708,7 +714,6 @@ extern void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); extern void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); -extern void pciauto_config_init(struct pci_controller *hose); extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index); @@ -739,6 +744,7 @@ extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, unsigned short device, unsigned short class); #endif +#endif /* !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) */ const char * pci_class_str(u8 class); int pci_last_busno(void); @@ -747,6 +753,7 @@ int pci_last_busno(void); extern void pci_mpc85xx_init (struct pci_controller *hose); #endif +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) /** * pci_write_bar32() - Write the address of a BAR including control bits * @@ -783,6 +790,7 @@ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); */ pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum, struct pci_device_id *ids, int *indexp); +#endif /* !CONFIG_DM_PCI || CONFIG_DM_PCI_COMPAT */ /* Access sizes for PCI reads and writes */ enum pci_size_t { @@ -1041,6 +1049,7 @@ int dm_pci_write_config32(struct udevice *dev, int offset, u32 value); */ int pci_write_config32(pci_dev_t pcidev, int offset, u32 value); +#ifdef CONFIG_DM_PCI_COMPAT /* Compatibility with old naming */ static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, u32 value) @@ -1093,6 +1102,19 @@ static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, return pci_read_config8(pcidev, offset, valuep); } +#endif /* CONFIG_DM_PCI_COMPAT */ + +/** + * dm_pciauto_config_device() - configure a device ready for use + * + * Space is allocated for each PCI base address register (BAR) so that the + * devices are mapped into memory and I/O space ready for use. + * + * @dev: Device to configure + * @return 0 if OK, -ve on error + */ +int dm_pciauto_config_device(struct udevice *dev); + /** * pci_conv_32_to_size() - convert a 32-bit read value to the given size *