From: Svyatoslav Ryhel Date: Tue, 11 Jul 2023 10:47:02 +0000 (+0300) Subject: board: wexler: qc750: add WEXLER Tab 7t support X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=2c4a399682a1e28d22f5e8afc91e61248188b259;p=u-boot.git board: wexler: qc750: add WEXLER Tab 7t support WEXLER Tab 7t is a mini tablet computer developed by WEXLER that runs the Android operating system. The device features a 7.0-inch (180 mm) HD display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM, 8, 16 or 32 GB of storage that can be supplemented with a microSDXC card giving up to 64 GB of additional storage and a full size USB port. Tested-by: Maksim Kurnosenko Signed-off-by: Svyatoslav Ryhel --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 362b4d3b22..ac01b52ac5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += \ tegra30-lg-p880.dtb \ tegra30-lg-p895.dtb \ tegra30-tec-ng.dtb \ + tegra30-wexler-qc750.dtb \ tegra114-dalmore.dtb \ tegra124-apalis.dtb \ tegra124-jetson-tk1.dtb \ diff --git a/arch/arm/dts/tegra30-wexler-qc750.dts b/arch/arm/dts/tegra30-wexler-qc750.dts new file mode 100644 index 0000000000..87c2a4072e --- /dev/null +++ b/arch/arm/dts/tegra30-wexler-qc750.dts @@ -0,0 +1,1106 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +/* CPU Speedo ID 7, Soc Speedo ID 1, CPU Process: 4, Core Process: 0 */ + +#include +#include + +#include "tegra30.dtsi" + +/ { + model = "Wexler Tab 7t"; + compatible = "wexler,qc750", "nvidia,tegra30"; + + chosen { + stdout-path = &uartd; + }; + + aliases { + i2c0 = &pwr_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc1; /* uSD slot */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + usb0 = µ_usb; + usb1 = &usb3; /* Full size USB */ + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* SDMMC1 pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cmd { + nvidia,pins = "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cd { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC3 pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3-cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC4 pinmux */ + sdmmc4-clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-rst-n { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam-mclk { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + drive-sdmmc4 { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + }; + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + + /* HDMI pinmux */ + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + hdmi-int { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-B */ + uartb-txd-rts { + nvidia,pins = "uart2_txd_pc2", + "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartb-rxd-cts { + nvidia,pins = "uart2_rxd_pc3", + "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-C */ + uartc-rxd-cts { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartc-txd-rts { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-D */ + uartd-rxd { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartd-txd { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* I2S pinmux */ + dap-i2s0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s1 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s2 { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-sclk { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s3 { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PCI-e pinmux */ + pex-l2-rst-n { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex-l0-prsnt-n { + nvidia,pins = "pex_l0_prsnt_n_pdd0", + "pex_l0_rst_n_pdd1", + "pex_l0_clkreq_n_pdd2", + "pex_l1_prsnt_n_pdd4", + "pex_l1_rst_n_pdd5", + "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex-wake-n { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SPI pinmux */ + spi1-mosi { + nvidia,pins = "spi1_mosi_px4", + "spi1_sck_px5", + "spi1_cs0_n_px6", + "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2-mosi { + nvidia,pins = "spi2_mosi_px0", + "spi2_miso_px1", + "spi2_cs1_n_pw2", + "spi2_cs2_n_pw3", + "ulpi_data7_po0", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2-sck { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Display A pinmux */ + lcd-pwr0 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr1_pc1", + "lcd_pwr2_pc6", + "lcd_m1_pw1", + "lcd_dc0_pn6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd-pclk { + nvidia,pins = "lcd_pclk_pb3", + "lcd_dc1_pd2", + "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_vsync_pj4", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_cs0_n_pn4", + "lcd_sdout_pn5", + "lcd_cs1_n_pw0", + "lcd_sdin_pz2", + "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd-wr-n { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk-32k-out { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sys-clk-req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* KBC pinmux */ + kb-col0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_col3_pq3", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-col4 { + nvidia,pins = "kb_col4_pq4", + "kb_col5_pq5", + "kb_col6_pq6", + "kb_col7_pq7", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-row3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7", + "kb_row8_ps0", + "kb_row9_ps1", + "kb_row10_ps2", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-row11 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* VI pinmux */ + vi-d0 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d10_pt2", + "vi_d11_pt3"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d2 { + nvidia,pins = "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_vsync_pd6", + "vi_hsync_pd7", + "vi_pclk_pt0", + "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + spdif-out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif-in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* ULPI pinmux */ + ulpi-clk { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-dir { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PORT U */ + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + jtag-rtck-pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PORT V */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PORT BB */ + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PORT CC */ + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + crt-hsync-vsync { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk1-req { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2-out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2-req { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-req { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* GMI pinmux */ + gmi-a18 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-wp-n { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad4 { + nvidia,pins = "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_dqs_pi2", + "gmi_cs0_n_pj0", + "gmi_cs4_n_pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad8 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad9 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad10 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad11 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "pwm3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-wr-n { + nvidia,pins = "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_cs1_n_pj2", + "gmi_adv_n_pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-cs6-n { + nvidia,pins = "gmi_cs6_n_pi3", + "gmi_cs7_n_pi6", + "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-rst-n { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-cs2-n { + nvidia,pins = "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-a19 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* GPIO power/drive control */ + drive-dap2 { + nvidia,pins = "drive_dap2", + "drive_dbg", + "drive_at5", + "drive_gme", + "drive_ddc", + "drive_ao1", + "drive_uart3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + + drive-sdio1 { + nvidia,pins = "drive_sdio1", + "drive_sdio3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + }; + + uartd: serial@70006300 { + status = "okay"; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: max77663@3c { + compatible = "maxim,max77663"; + reg = <0x3c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + system-power-controller; + + regulators { + vdd_1v8_vio: sd2 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcore_emmc: ldo3 { + regulator-name = "vcore_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3100000>; + regulator-boot-on; + }; + + vddio_usd: ldo6 { + regulator-name = "vddio_usd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + sdmmc1: sdhci@78000000 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vdd_usd>; + vqmmc-supply = <&vddio_usd>; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + micro_usb: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + /* Full size USB */ + usb3: usb@7d008000 { + status = "okay"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_bl>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <1 35 70 105 140 175 210 255>; + default-brightness-level = <5>; + }; + + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ref-oscillator"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&pmic EN0 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "simple-panel"; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + + display-timings { + timing@0 { + /* 1280x800@60Hz */ + clock-frequency = <81750000>; + + hactive = <800>; + hfront-porch = <64>; + hback-porch = <128>; + hsync-len = <64>; + + vactive = <1280>; + vfront-porch = <5>; + vback-porch = <2>; + vsync-len = <1>; + }; + }; + }; + + vdd_5v0_bl: regulator-bl { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_usd: regulator-emmc { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sdmmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_pnl_reg: regulator-pnl { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 3e478b3b7b..c6ab1a6a46 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -28,6 +28,10 @@ config TARGET_GROUPER bool "Asus and Google Grouper board" select BOARD_LATE_INIT +config TARGET_QC750 + bool "Wexler QC750 board" + select BOARD_LATE_INIT + config TARGET_TEC_NG bool "Avionic Design TEC-NG board" select BOARD_LATE_INIT @@ -51,6 +55,7 @@ source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" source "board/htc/endeavoru/Kconfig" source "board/asus/grouper/Kconfig" +source "board/wexler/qc750/Kconfig" source "board/avionic-design/tec-ng/Kconfig" source "board/asus/transformer-t30/Kconfig" source "board/lg/x3-t30/Kconfig" diff --git a/board/wexler/qc750/Kconfig b/board/wexler/qc750/Kconfig new file mode 100644 index 0000000000..45a1e5e057 --- /dev/null +++ b/board/wexler/qc750/Kconfig @@ -0,0 +1,12 @@ +if TARGET_QC750 + +config SYS_BOARD + default "qc750" + +config SYS_VENDOR + default "wexler" + +config SYS_CONFIG_NAME + default "qc750" + +endif diff --git a/board/wexler/qc750/MAINTAINERS b/board/wexler/qc750/MAINTAINERS new file mode 100644 index 0000000000..017f6f2b70 --- /dev/null +++ b/board/wexler/qc750/MAINTAINERS @@ -0,0 +1,7 @@ +QC750 BOARD +M: Svyatoslav Ryhel +S: Maintained +F: board/wexler/qc750/ +F: configs/qc750_defconfig +F: doc/board/wexler/qc750.rst +F: include/configs/qc750.h diff --git a/board/wexler/qc750/Makefile b/board/wexler/qc750/Makefile new file mode 100644 index 0000000000..4daefc4159 --- /dev/null +++ b/board/wexler/qc750/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2010-2012 +# NVIDIA Corporation +# +# (C) Copyright 2023 +# Svyatoslav Ryhel + +obj-$(CONFIG_SPL_BUILD) += qc750-spl.o + +obj-y += qc750.o diff --git a/board/wexler/qc750/qc750-spl.c b/board/wexler/qc750/qc750-spl.c new file mode 100644 index 0000000000..707be7779e --- /dev/null +++ b/board/wexler/qc750/qc750-spl.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * T30 QC750 SPL stage configuration + * + * (C) Copyright 2010-2013 + * NVIDIA Corporation + * + * (C) Copyright 2023 + * Svyatoslav Ryhel + */ + +#include +#include +#include + +#define MAX77663_I2C_ADDR (0x3c << 1) + +#define MAX77663_REG_SD0 0x16 +#define MAX77663_REG_SD0_DATA (0x2100 | MAX77663_REG_SD0) +#define MAX77663_REG_SD1 0x17 +#define MAX77663_REG_SD1_DATA (0x3000 | MAX77663_REG_SD1) +#define MAX77663_REG_LDO4 0x2b +#define MAX77663_REG_LDO4_DATA (0xE000 | MAX77663_REG_LDO4) + +#define MAX77663_REG_GPIO4 0x3a +#define MAX77663_REG_GPIO4_DATA (0x0100 | MAX77663_REG_GPIO4) + +void pmic_enable_cpu_vdd(void) +{ + /* Set VDD_CORE to 1.200V. */ + tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD1_DATA); + + udelay(1000); + + /* Bring up VDD_CPU to 1.0125V. */ + tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD0_DATA); + udelay(1000); + + /* Bring up VDD_RTC to 1.200V. */ + tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_LDO4_DATA); + udelay(10 * 1000); + + /* Set 32k-out gpio state */ + tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_GPIO4_DATA); +} diff --git a/board/wexler/qc750/qc750.c b/board/wexler/qc750/qc750.c new file mode 100644 index 0000000000..5234211aea --- /dev/null +++ b/board/wexler/qc750/qc750.c @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2010-2013 + * NVIDIA Corporation + * + * (C) Copyright 2023 + * Svyatoslav Ryhel + */ + +#include + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, struct bd_info *bd) +{ + /* Remove TrustZone nodes */ + fdt_del_node_and_alias(blob, "/firmware"); + fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000"); + + return 0; +} +#endif diff --git a/configs/qc750_defconfig b/configs/qc750_defconfig new file mode 100644 index 0000000000..17b5ec8824 --- /dev/null +++ b/configs/qc750_defconfig @@ -0,0 +1,81 @@ +CONFIG_ARM=y +CONFIG_ARCH_TEGRA=y +CONFIG_SUPPORT_PASSING_ATAGS=y +CONFIG_CMDLINE_TAG=y +CONFIG_INITRD_TAG=y +CONFIG_TEXT_BASE=0x80110000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x3000 +CONFIG_ENV_OFFSET=0xFFFFD000 +CONFIG_DEFAULT_DEVICE_TREE="tegra30-wexler-qc750" +CONFIG_SPL_TEXT_BASE=0x80108000 +CONFIG_SPL_STACK=0x800ffffc +CONFIG_TEGRA30=y +CONFIG_TARGET_QC750=y +CONFIG_TEGRA_ENABLE_UARTD=y +CONFIG_CMD_EBTUPDATE=y +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_BUTTON_CMD=y +CONFIG_BOOTDELAY=0 +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_BOOTCOMMAND="bootflow scan; poweroff" +CONFIG_SYS_PBSIZE=2084 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 +CONFIG_SYS_PROMPT="Tegra30 (QC750) # " +# CONFIG_CMD_BOOTEFI_BOOTMGR is not set +CONFIG_CMD_BOOTMENU=y +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_UMS_ABORT_KEYED=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PAUSE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_PART=2 +CONFIG_BUTTON=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x91000000 +CONFIG_FASTBOOT_BUF_SIZE=0x10000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_MAX77663_GPIO=y +CONFIG_SYS_I2C_TEGRA=y +CONFIG_BUTTON_KEYBOARD=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_MAX77663=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_MAX77663=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_PWM_TEGRA=y +CONFIG_SYS_NS16550=y +CONFIG_SYSRESET_MAX77663=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_VIDEO=y +# CONFIG_VIDEO_LOGO is not set +CONFIG_VIDEO_TEGRA20=y diff --git a/doc/board/index.rst b/doc/board/index.rst index 2340eeb077..9d31390fa8 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -58,5 +58,6 @@ Board-specific doc ti/index toradex/index variscite/index + wexler/index xen/index xilinx/index diff --git a/doc/board/wexler/index.rst b/doc/board/wexler/index.rst new file mode 100644 index 0000000000..308aad79e1 --- /dev/null +++ b/doc/board/wexler/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +WEXLER +====== + +.. toctree:: + :maxdepth: 2 + + qc750 diff --git a/doc/board/wexler/qc750.rst b/doc/board/wexler/qc750.rst new file mode 100644 index 0000000000..adef3c85dd --- /dev/null +++ b/doc/board/wexler/qc750.rst @@ -0,0 +1,125 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for the WEXLER QC750 tablet +================================== + +``DISCLAMER!`` Moving your WEXLER QC750 to use U-Boot assumes replacement +of the vendor bootloader. Vendor Android firmwares will no longer be able +to run on the device. This replacement IS reversible. + +Quick Start +----------- + +- Build U-Boot +- Process U-Boot +- Flashing U-Boot into the eMMC +- Boot +- Self Upgrading + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabi- + $ make qc750_defconfig + $ make + +After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin`` +image, ready for further processing. + +Process U-Boot +-------------- + +``DISCLAMER!`` All questions related to the re-crypt work should be asked +in re-crypt repo issues. NOT HERE! + +re-crypt is a tool that processes the ``u-boot-dtb-tegra.bin`` binary into form +usable by device. This process is required only on the first installation or +to recover the device in case of a failed update. + +Permanent installation can be performed either by using the tegrarcm or by +pre-loading just built U-Boot into RAM. + +Processing for the NV3P protocol +******************************** + +.. code-block:: bash + + $ git clone https://gitlab.com/grate-driver/re-crypt.git + $ cd re-crypt # place your u-boot-dtb-tegra.bin here + $ ./re-crypt.py --dev qc750 + +The script will produce a ``repart-block.bin`` ready to flash. + +Processing for pre-loaded U-Boot +******************************** + +The procedure is the same, but the ``--split`` argument is used with the +``re-crypt.py``. The script will produce ``bct.img`` and ``ebt.img`` ready +to flash. + +Flashing U-Boot into the eMMC +----------------------------- + +``DISCLAMER!`` All questions related to tegrarcm should be asked in the proper +place. NOT HERE! Flashing U-Boot will erase all eMMC, so make a backup before! + +Permanent installation can be performed either by using the nv3p protocol or by +pre-loading just built U-Boot into RAM. + +Flashing with the NV3P protocol +******************************* + +Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can +enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by +pre-loading vendor bootloader with the Fusée Gelée. + +With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in +encrypted state in form, which can just be written RAW at the start of eMMC. + +.. code-block:: bash + + $ wheelie --bct qc750.bct --bl bootloader.bin + $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin + +When flashing is done, reboot the device. + +Flashing with a pre-loaded U-Boot +********************************* + +U-Boot pre-loaded into RAM acts the same as when it was booted "cold". Currently +U-Boot supports bootmenu entry fastboot, which allows to write a processed copy +of U-Boot permanently into eMMC. + +While pre-loading U-Boot, hold the ``volume down`` button which will trigger +the bootmenu. There, select ``fastboot`` using the volume and power buttons. +After, on host PC, do: + +.. code-block:: bash + + $ fastboot flash 0.1 bct.img + $ fastboot flash 0.2 ebt.img + $ fastboot reboot + +Device will reboot. + +Boot +---- + +To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on +eMMC. Additionally, if the Volume Down button is pressed while booting, the +device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC +as mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot console +and update bootloader (check the next chapter). + +Flashing ``repart-block.bin`` eliminates vendor restrictions on eMMC and allows +the user to use/partition it in any way the user desires. + +Self Upgrading +-------------- + +Place your ``u-boot-dtb-tegra.bin`` on the first partition of the MicroSD card +and insert it into the tablet. Enter bootmenu, choose update the bootloader +option with the Power button and U-Boot should update itself. Once the process +is completed, U-Boot will ask to press any button to reboot. diff --git a/include/configs/qc750.h b/include/configs/qc750.h new file mode 100644 index 0000000000..ce6665d0f3 --- /dev/null +++ b/include/configs/qc750.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2010,2012 + * NVIDIA Corporation + * + * (C) Copyright 2023 + * Svyatoslav Ryhel + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra30-common.h" + +/* High-level configuration options */ +#define CFG_TEGRA_BOARD_STRING "Wexler QC750" + +#define QC750_FLASH_UBOOT \ + "flash_uboot=echo Preparing RAM;" \ + "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \ + "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \ + "echo Reading BCT;" \ + "mmc dev 0 1;" \ + "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \ + "echo Reading bootloader;" \ + "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \ + "then echo Calculating bootloader size;" \ + "size mmc 1:1 ${bootloader_file};" \ + "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \ + "echo Writing bootloader to eMMC;" \ + "mmc dev 0 1;" \ + "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \ + "mmc dev 0 2;" \ + "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \ + "echo Bootloader written successfully;" \ + "pause 'Press ANY key to reboot device...'; reset;" \ + "else echo Reading bootloader failed;" \ + "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0" + +#define QC750_BOOTMENU \ + QC750_FLASH_UBOOT \ + "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \ + "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \ + "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \ + "bootmenu_3=update bootloader=run flash_uboot\0" \ + "bootmenu_4=reboot RCM=enterrcm\0" \ + "bootmenu_5=reboot=reset\0" \ + "bootmenu_6=power off=poweroff\0" \ + "bootmenu_delay=-1\0" + +#define BOARD_EXTRA_ENV_SETTINGS \ + "boot_block_size_r=0x200000\0" \ + "boot_block_size=0x1000\0" \ + "bootloader_file=u-boot-dtb-tegra.bin\0" \ + "button_cmd_0_name=Volume Down\0" \ + "button_cmd_0=bootmenu\0" \ + "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ + QC750_BOOTMENU + +/* Board-specific serial config */ +#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */