From: Franck LENORMAND Date: Wed, 9 Oct 2019 08:27:43 +0000 (+0200) Subject: imx8: Configure SNVS X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=242d1cd69b9f;p=u-boot.git imx8: Configure SNVS Add a module to configure the tamper and secure violation of the SNVS using the SCU API. The module also adds some commands: - snvs_cfg: Configure the SNVS HP and LP registers - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP) - tamper_pin_cfg: Change the configuration of the tamper pins - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear status bits Reviewed-by: Fabio Estevam Signed-off-by: Franck LENORMAND Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/arch/arm/include/asm/arch-imx8/sci/sci.h b/arch/arm/include/asm/arch-imx8/sci/sci.h index 179037ae17..05f736f14f 100644 --- a/arch/arm/include/asm/arch-imx8/sci/sci.h +++ b/arch/arm/include/asm/arch-imx8/sci/sci.h @@ -109,6 +109,7 @@ int sc_rm_get_resource_owner(sc_ipc_t ipc, sc_rsrc_t resource, /* PAD API */ int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val); +int sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val); /* SMMU API */ int sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource, sc_rm_sid_t sid); @@ -128,5 +129,8 @@ int sc_seco_update_mpmr(sc_ipc_t ipc, sc_faddr_t addr, u8 size, u8 lock); int sc_seco_get_mp_sign(sc_ipc_t ipc, sc_faddr_t msg_addr, u16 msg_size, sc_faddr_t dst_addr, u16 dst_size); int sc_seco_secvio_dgo_config(sc_ipc_t ipc, u8 id, u8 access, u32 *data); +int sc_seco_secvio_config(sc_ipc_t ipc, u8 id, u8 access, + u32 *data0, u32 *data1, u32 *data2, u32 *data3, + u32 *data4, u8 size); #endif diff --git a/arch/arm/include/asm/arch-imx8/snvs_security_sc.h b/arch/arm/include/asm/arch-imx8/snvs_security_sc.h new file mode 100644 index 0000000000..0b7ded7ba6 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/snvs_security_sc.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef _SNVS_SECURITY_SC_H +#define _SNVS_SECURITY_SC_H + +int snvs_security_sc_init(void); + +#endif /* _SNVS_SECURITY_SC_H */ diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 5827ab334f..1f8add015f 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -90,4 +90,17 @@ source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" source "board/siemens/capricorn/Kconfig" +config IMX_SNVS_SEC_SC + bool "Support SNVS configuration" + help + Allow to configure the SNVS via SCU API to configure tampers and secure + violation. + +config IMX_SNVS_SEC_SC_AUTO + bool "Support SNVS configuration command" + depends on IMX_SNVS_SEC_SC + help + This configuration will apply the selected configurations automatically + at boot. + endif diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile index 7ffb7e95b2..bbb41adbe4 100644 --- a/arch/arm/mach-imx/imx8/Makefile +++ b/arch/arm/mach-imx/imx8/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_AHAB_BOOT) += ahab.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image.o parse-container.o endif +obj-$(CONFIG_IMX_SNVS_SEC_SC) += snvs_security_sc.o diff --git a/arch/arm/mach-imx/imx8/snvs_security_sc.c b/arch/arm/mach-imx/imx8/snvs_security_sc.c new file mode 100644 index 0000000000..73f5651161 --- /dev/null +++ b/arch/arm/mach-imx/imx8/snvs_security_sc.c @@ -0,0 +1,923 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP. + */ + +/* + * Configuration of the Tamper pins in different mode: + * - default (no tamper pins): _default_ + * - passive mode expecting VCC on the line: "_passive_vcc_" + * - passive mode expecting VCC on the line: "_passive_gnd_" + * - active mode: "_active_" + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Access to gd */ +DECLARE_GLOBAL_DATA_PTR; + +#define SC_WRITE_CONF 1 + +#define PGD_HEX_VALUE 0x41736166 +#define SRTC_EN 0x1 +#define DP_EN BIT(5) + +struct snvs_security_sc_conf { + struct snvs_hp_conf { + u32 lock; /* HPLR - HP Lock */ + u32 __cmd; /* HPCOMR - HP Command */ + u32 __ctl; /* HPCR - HP Control */ + u32 secvio_intcfg; /* HPSICR - Security Violation Int + * Config + */ + u32 secvio_ctl; /* HPSVCR - Security Violation Control*/ + u32 status; /* HPSR - HP Status */ + u32 secvio_status; /* HPSVSR - Security Violation Status */ + u32 __ha_counteriv; /* High Assurance Counter IV */ + u32 __ha_counter; /* High Assurance Counter */ + u32 __rtc_msb; /* Real Time Clock/Counter MSB */ + u32 __rtc_lsb; /* Real Time Counter LSB */ + u32 __time_alarm_msb; /* Time Alarm MSB */ + u32 __time_alarm_lsb; /* Time Alarm LSB */ + } hp; + struct snvs_lp_conf { + u32 lock; + u32 __ctl; + u32 __mstr_key_ctl; /* Master Key Control */ + u32 secvio_ctl; /* Security Violation Control */ + u32 tamper_filt_cfg; /* Tamper Glitch Filters Configuration*/ + u32 tamper_det_cfg; /* Tamper Detectors Configuration */ + u32 status; + u32 __srtc_msb; /* Secure Real Time Clock/Counter MSB */ + u32 __srtc_lsb; /* Secure Real Time Clock/Counter LSB */ + u32 __time_alarm; /* Time Alarm */ + u32 __smc_msb; /* Secure Monotonic Counter MSB */ + u32 __smc_lsb; /* Secure Monotonic Counter LSB */ + u32 __pwr_glitch_det; /* Power Glitch Detector */ + u32 __gen_purpose; + u8 __zmk[32]; /* Zeroizable Master Key */ + u32 __rsvd0; + u32 __gen_purposes[4]; /* gp0_30 to gp0_33 */ + u32 tamper_det_cfg2; /* Tamper Detectors Configuration2 */ + u32 tamper_det_status; /* Tamper Detectors status */ + u32 tamper_filt1_cfg; /* Tamper Glitch Filter1 Configuration*/ + u32 tamper_filt2_cfg; /* Tamper Glitch Filter2 Configuration*/ + u32 __rsvd1[4]; + u32 act_tamper1_cfg; /* Active Tamper1 Configuration */ + u32 act_tamper2_cfg; /* Active Tamper2 Configuration */ + u32 act_tamper3_cfg; /* Active Tamper3 Configuration */ + u32 act_tamper4_cfg; /* Active Tamper4 Configuration */ + u32 act_tamper5_cfg; /* Active Tamper5 Configuration */ + u32 __rsvd2[3]; + u32 act_tamper_ctl; /* Active Tamper Control */ + u32 act_tamper_clk_ctl; /* Active Tamper Clock Control */ + u32 act_tamper_routing_ctl1;/* Active Tamper Routing Control1 */ + u32 act_tamper_routing_ctl2;/* Active Tamper Routing Control2 */ + } lp; +}; + +static struct snvs_security_sc_conf snvs_default_config = { + .hp = { + .lock = 0x1f0703ff, + .secvio_ctl = 0x3000007f, + }, + .lp = { + .lock = 0x1f0003ff, + .secvio_ctl = 0x36, + .tamper_filt_cfg = 0, + .tamper_det_cfg = 0x76, /* analogic tampers + * + rollover tampers + */ + .tamper_det_cfg2 = 0, + .tamper_filt1_cfg = 0, + .tamper_filt2_cfg = 0, + .act_tamper1_cfg = 0, + .act_tamper2_cfg = 0, + .act_tamper3_cfg = 0, + .act_tamper4_cfg = 0, + .act_tamper5_cfg = 0, + .act_tamper_ctl = 0, + .act_tamper_clk_ctl = 0, + .act_tamper_routing_ctl1 = 0, + .act_tamper_routing_ctl2 = 0, + } +}; + +static struct snvs_security_sc_conf snvs_passive_vcc_config = { + .hp = { + .lock = 0x1f0703ff, + .secvio_ctl = 0x3000007f, + }, + .lp = { + .lock = 0x1f0003ff, + .secvio_ctl = 0x36, + .tamper_filt_cfg = 0, + .tamper_det_cfg = 0x276, /* ET1 will trig on line at GND + * + analogic tampers + * + rollover tampers + */ + .tamper_det_cfg2 = 0, + .tamper_filt1_cfg = 0, + .tamper_filt2_cfg = 0, + .act_tamper1_cfg = 0, + .act_tamper2_cfg = 0, + .act_tamper3_cfg = 0, + .act_tamper4_cfg = 0, + .act_tamper5_cfg = 0, + .act_tamper_ctl = 0, + .act_tamper_clk_ctl = 0, + .act_tamper_routing_ctl1 = 0, + .act_tamper_routing_ctl2 = 0, + } +}; + +static struct snvs_security_sc_conf snvs_passive_gnd_config = { + .hp = { + .lock = 0x1f0703ff, + .secvio_ctl = 0x3000007f, + }, + .lp = { + .lock = 0x1f0003ff, + .secvio_ctl = 0x36, + .tamper_filt_cfg = 0, + .tamper_det_cfg = 0xa76, /* ET1 will trig on line at VCC + * + analogic tampers + * + rollover tampers + */ + .tamper_det_cfg2 = 0, + .tamper_filt1_cfg = 0, + .tamper_filt2_cfg = 0, + .act_tamper1_cfg = 0, + .act_tamper2_cfg = 0, + .act_tamper3_cfg = 0, + .act_tamper4_cfg = 0, + .act_tamper5_cfg = 0, + .act_tamper_ctl = 0, + .act_tamper_clk_ctl = 0, + .act_tamper_routing_ctl1 = 0, + .act_tamper_routing_ctl2 = 0, + } +}; + +static struct snvs_security_sc_conf snvs_active_config = { + .hp = { + .lock = 0x1f0703ff, + .secvio_ctl = 0x3000007f, + }, + .lp = { + .lock = 0x1f0003ff, + .secvio_ctl = 0x36, + .tamper_filt_cfg = 0x00800000, /* Enable filtering */ + .tamper_det_cfg = 0x276, /* ET1 enabled + analogic tampers + * + rollover tampers + */ + .tamper_det_cfg2 = 0, + .tamper_filt1_cfg = 0, + .tamper_filt2_cfg = 0, + .act_tamper1_cfg = 0x84001111, + .act_tamper2_cfg = 0, + .act_tamper3_cfg = 0, + .act_tamper4_cfg = 0, + .act_tamper5_cfg = 0, + .act_tamper_ctl = 0x00010001, + .act_tamper_clk_ctl = 0, + .act_tamper_routing_ctl1 = 0x1, + .act_tamper_routing_ctl2 = 0, + } +}; + +static struct snvs_security_sc_conf *get_snvs_config(void) +{ + return &snvs_default_config; +} + +struct snvs_dgo_conf { + u32 tamper_offset_ctl; + u32 tamper_pull_ctl; + u32 tamper_ana_test_ctl; + u32 tamper_sensor_trim_ctl; + u32 tamper_misc_ctl; + u32 tamper_core_volt_mon_ctl; +}; + +static struct snvs_dgo_conf snvs_dgo_default_config = { + .tamper_misc_ctl = 0x80000000, /* Lock the DGO */ +}; + +static struct snvs_dgo_conf snvs_dgo_passive_vcc_config = { + .tamper_misc_ctl = 0x80000000, /* Lock the DGO */ + .tamper_pull_ctl = 0x00000001, /* Pull down ET1 */ + .tamper_ana_test_ctl = 0x20000000, /* Enable tamper */ +}; + +static struct snvs_dgo_conf snvs_dgo_passive_gnd_config = { + .tamper_misc_ctl = 0x80000000, /* Lock the DGO */ + .tamper_pull_ctl = 0x00000401, /* Pull up ET1 */ + .tamper_ana_test_ctl = 0x20000000, /* Enable tamper */ +}; + +static struct snvs_dgo_conf snvs_dgo_active_config = { + .tamper_misc_ctl = 0x80000000, /* Lock the DGO */ + .tamper_ana_test_ctl = 0x20000000, /* Enable tamper */ +}; + +static struct snvs_dgo_conf *get_snvs_dgo_config(void) +{ + return &snvs_dgo_default_config; +} + +struct tamper_pin_cfg { + u32 pad; + u32 mux_conf; +}; + +static struct tamper_pin_cfg tamper_pin_list_default_config[] = { + {SC_P_CSI_D00, 0}, /* Tamp_Out0 */ + {SC_P_CSI_D01, 0}, /* Tamp_Out1 */ + {SC_P_CSI_D02, 0}, /* Tamp_Out2 */ + {SC_P_CSI_D03, 0}, /* Tamp_Out3 */ + {SC_P_CSI_D04, 0}, /* Tamp_Out4 */ + {SC_P_CSI_D05, 0}, /* Tamp_In0 */ + {SC_P_CSI_D06, 0}, /* Tamp_In1 */ + {SC_P_CSI_D07, 0}, /* Tamp_In2 */ + {SC_P_CSI_HSYNC, 0}, /* Tamp_In3 */ + {SC_P_CSI_VSYNC, 0}, /* Tamp_In4 */ +}; + +static struct tamper_pin_cfg tamper_pin_list_passive_vcc_config[] = { + {SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */ +}; + +static struct tamper_pin_cfg tamper_pin_list_passive_gnd_config[] = { + {SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */ +}; + +static struct tamper_pin_cfg tamper_pin_list_active_config[] = { + {SC_P_CSI_D00, 0x1a000060}, /* Tamp_Out0 */ /* Sel tamper + OD */ + {SC_P_CSI_D05, 0x1c000060}, /* Tamp_In0 */ /* Sel tamper + OD input */ +}; + +#define TAMPER_PIN_LIST_CHOSEN tamper_pin_list_default_config + +static struct tamper_pin_cfg *get_tamper_pin_cfg_list(u32 *size) +{ + *size = sizeof(TAMPER_PIN_LIST_CHOSEN) / + sizeof(TAMPER_PIN_LIST_CHOSEN[0]); + + return TAMPER_PIN_LIST_CHOSEN; +} + +#define SC_CONF_OFFSET_OF(_field) \ + (offsetof(struct snvs_security_sc_conf, _field)) + +static u32 ptr_value(u32 *_p) +{ + return (_p) ? *_p : 0xdeadbeef; +} + +static int check_write_secvio_config(u32 id, u32 *_p1, u32 *_p2, + u32 *_p3, u32 *_p4, u32 *_p5, + u32 _cnt) +{ + int scierr = 0; + u32 d1 = ptr_value(_p1); + u32 d2 = ptr_value(_p2); + u32 d3 = ptr_value(_p3); + u32 d4 = ptr_value(_p4); + u32 d5 = ptr_value(_p5); + + scierr = sc_seco_secvio_config(-1, id, SC_WRITE_CONF, &d1, &d2, &d3, + &d4, &d4, _cnt); + if (scierr != SC_ERR_NONE) { + printf("Failed to set secvio configuration\n"); + debug("Failed to set conf id 0x%x with values ", id); + debug("0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x (cnt: %d)\n", + d1, d2, d3, d4, d5, _cnt); + goto exit; + } + + if (_p1) + *(u32 *)_p1 = d1; + if (_p2) + *(u32 *)_p2 = d2; + if (_p3) + *(u32 *)_p3 = d3; + if (_p4) + *(u32 *)_p4 = d4; + if (_p5) + *(u32 *)_p5 = d5; + +exit: + return scierr; +} + +#define SC_CHECK_WRITE1(id, _p1) \ + check_write_secvio_config(id, _p1, NULL, NULL, NULL, NULL, 1) + +static int apply_snvs_config(struct snvs_security_sc_conf *cnf) +{ + int scierr = 0; + + debug("%s\n", __func__); + + debug("Applying config:\n" + "\thp.lock = 0x%.8x\n" + "\thp.secvio_ctl = 0x%.8x\n" + "\tlp.lock = 0x%.8x\n" + "\tlp.secvio_ctl = 0x%.8x\n" + "\tlp.tamper_filt_cfg = 0x%.8x\n" + "\tlp.tamper_det_cfg = 0x%.8x\n" + "\tlp.tamper_det_cfg2 = 0x%.8x\n" + "\tlp.tamper_filt1_cfg = 0x%.8x\n" + "\tlp.tamper_filt2_cfg = 0x%.8x\n" + "\tlp.act_tamper1_cfg = 0x%.8x\n" + "\tlp.act_tamper2_cfg = 0x%.8x\n" + "\tlp.act_tamper3_cfg = 0x%.8x\n" + "\tlp.act_tamper4_cfg = 0x%.8x\n" + "\tlp.act_tamper5_cfg = 0x%.8x\n" + "\tlp.act_tamper_ctl = 0x%.8x\n" + "\tlp.act_tamper_clk_ctl = 0x%.8x\n" + "\tlp.act_tamper_routing_ctl1 = 0x%.8x\n" + "\tlp.act_tamper_routing_ctl2 = 0x%.8x\n", + cnf->hp.lock, + cnf->hp.secvio_ctl, + cnf->lp.lock, + cnf->lp.secvio_ctl, + cnf->lp.tamper_filt_cfg, + cnf->lp.tamper_det_cfg, + cnf->lp.tamper_det_cfg2, + cnf->lp.tamper_filt1_cfg, + cnf->lp.tamper_filt2_cfg, + cnf->lp.act_tamper1_cfg, + cnf->lp.act_tamper2_cfg, + cnf->lp.act_tamper3_cfg, + cnf->lp.act_tamper4_cfg, + cnf->lp.act_tamper5_cfg, + cnf->lp.act_tamper_ctl, + cnf->lp.act_tamper_clk_ctl, + cnf->lp.act_tamper_routing_ctl1, + cnf->lp.act_tamper_routing_ctl2); + + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_filt_cfg), + &cnf->lp.tamper_filt_cfg, + &cnf->lp.tamper_filt1_cfg, + &cnf->lp.tamper_filt2_cfg, NULL, + NULL, 3); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Configure AT */ + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.act_tamper1_cfg), + &cnf->lp.act_tamper1_cfg, + &cnf->lp.act_tamper2_cfg, + &cnf->lp.act_tamper2_cfg, + &cnf->lp.act_tamper2_cfg, + &cnf->lp.act_tamper2_cfg, 5); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Configure AT routing */ + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.act_tamper_routing_ctl1), + &cnf->lp.act_tamper_routing_ctl1, + &cnf->lp.act_tamper_routing_ctl2, + NULL, NULL, NULL, 2); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Configure AT frequency */ + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.act_tamper_clk_ctl), + &cnf->lp.act_tamper_clk_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Activate the ATs */ + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.act_tamper_ctl), + &cnf->lp.act_tamper_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Activate the detectors */ + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_det_cfg), + &cnf->lp.tamper_det_cfg, + &cnf->lp.tamper_det_cfg2, NULL, NULL, + NULL, 2); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Configure LP secvio */ + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.secvio_ctl), + &cnf->lp.secvio_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Configure HP secvio */ + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(hp.secvio_ctl), + &cnf->hp.secvio_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Lock access */ + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(hp.lock), &cnf->hp.lock); + if (scierr != SC_ERR_NONE) + goto exit; + + scierr = SC_CHECK_WRITE1(SC_CONF_OFFSET_OF(lp.lock), &cnf->lp.lock); + if (scierr != SC_ERR_NONE) + goto exit; + +exit: + return (scierr == SC_ERR_NONE) ? 0 : -EIO; +} + +static int dgo_write(u32 _id, u8 _access, u32 *_pdata) +{ + int scierr = sc_seco_secvio_dgo_config(-1, _id, _access, _pdata); + + if (scierr != SC_ERR_NONE) { + printf("Failed to set dgo configuration\n"); + debug("Failed to set conf id 0x%x : 0x%.8x", _id, *_pdata); + } + + return scierr; +} + +static int apply_snvs_dgo_config(struct snvs_dgo_conf *cnf) +{ + int scierr = 0; + + debug("%s\n", __func__); + + debug("Applying config:\n" + "\ttamper_offset_ctl = 0x%.8x\n" + "\ttamper_pull_ctl = 0x%.8x\n" + "\ttamper_ana_test_ctl = 0x%.8x\n" + "\ttamper_sensor_trim_ctl = 0x%.8x\n" + "\ttamper_misc_ctl = 0x%.8x\n" + "\ttamper_core_volt_mon_ctl = 0x%.8x\n", + cnf->tamper_offset_ctl, + cnf->tamper_pull_ctl, + cnf->tamper_ana_test_ctl, + cnf->tamper_sensor_trim_ctl, + cnf->tamper_misc_ctl, + cnf->tamper_core_volt_mon_ctl); + + dgo_write(0x04, 1, &cnf->tamper_offset_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + dgo_write(0x14, 1, &cnf->tamper_pull_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + dgo_write(0x24, 1, &cnf->tamper_ana_test_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + dgo_write(0x34, 1, &cnf->tamper_sensor_trim_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + dgo_write(0x54, 1, &cnf->tamper_core_volt_mon_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + + /* Last as it could lock the writes */ + dgo_write(0x44, 1, &cnf->tamper_misc_ctl); + if (scierr != SC_ERR_NONE) + goto exit; + +exit: + return (scierr == SC_ERR_NONE) ? 0 : -EIO; +} + +static int pad_write(u32 _pad, u32 _value) +{ + int scierr = sc_pad_set(-1, _pad, _value); + + if (scierr != SC_ERR_NONE) { + printf("Failed to set pad configuration\n"); + debug("Failed to set conf pad 0x%x : 0x%.8x", _pad, _value); + } + + return scierr; +} + +static int apply_tamper_pin_list_config(struct tamper_pin_cfg *confs, u32 size) +{ + int scierr = 0; + u32 idx; + + debug("%s\n", __func__); + + for (idx = 0; idx < size; idx++) { + debug("\t idx %d: pad %d: 0x%.8x\n", idx, confs[idx].pad, + confs[idx].mux_conf); + pad_write(confs[idx].pad, 3 << 30 | confs[idx].mux_conf); + if (scierr != SC_ERR_NONE) + goto exit; + } + +exit: + return (scierr == SC_ERR_NONE) ? 0 : -EIO; +} + +int examples(void) +{ + u32 size; + struct snvs_security_sc_conf *snvs_conf; + struct snvs_dgo_conf *snvs_dgo_conf; + struct tamper_pin_cfg *tamper_pin_conf; + + /* Caller */ + snvs_conf = get_snvs_config(); + snvs_dgo_conf = get_snvs_dgo_config(); + tamper_pin_conf = get_tamper_pin_cfg_list(&size); + + /* Default */ + snvs_conf = &snvs_default_config; + snvs_dgo_conf = &snvs_dgo_default_config; + tamper_pin_conf = tamper_pin_list_default_config; + + /* Passive tamper expecting VCC on the line */ + snvs_conf = &snvs_passive_vcc_config; + snvs_dgo_conf = &snvs_dgo_passive_vcc_config; + tamper_pin_conf = tamper_pin_list_passive_vcc_config; + + /* Passive tamper expecting GND on the line */ + snvs_conf = &snvs_passive_gnd_config; + snvs_dgo_conf = &snvs_dgo_passive_gnd_config; + tamper_pin_conf = tamper_pin_list_passive_gnd_config; + + /* Active tamper */ + snvs_conf = &snvs_active_config; + snvs_dgo_conf = &snvs_dgo_active_config; + tamper_pin_conf = tamper_pin_list_active_config; + + return !snvs_conf + !snvs_dgo_conf + !tamper_pin_conf; +} + +#ifdef CONFIG_IMX_SNVS_SEC_SC_AUTO +int snvs_security_sc_init(void) +{ + int err = 0; + + struct snvs_security_sc_conf *snvs_conf; + struct snvs_dgo_conf *snvs_dgo_conf; + struct tamper_pin_cfg *tamper_pin_conf; + u32 size; + + debug("%s\n", __func__); + + snvs_conf = get_snvs_config(); + snvs_dgo_conf = get_snvs_dgo_config(); + + tamper_pin_conf = get_tamper_pin_cfg_list(&size); + + err = apply_tamper_pin_list_config(tamper_pin_conf, size); + if (err) { + debug("Failed to set pins\n"); + goto exit; + } + + err = apply_snvs_dgo_config(snvs_dgo_conf); + if (err) { + debug("Failed to set dgo\n"); + goto exit; + } + + err = apply_snvs_config(snvs_conf); + if (err) { + debug("Failed to set snvs\n"); + goto exit; + } + +exit: + return err; +} +#endif /* CONFIG_IMX_SNVS_SEC_SC_AUTO */ + +static char snvs_cfg_help_text[] = + "snvs_cfg\n" + "\thp.lock\n" + "\thp.secvio_ctl\n" + "\tlp.lock\n" + "\tlp.secvio_ctl\n" + "\tlp.tamper_filt_cfg\n" + "\tlp.tamper_det_cfg\n" + "\tlp.tamper_det_cfg2\n" + "\tlp.tamper_filt1_cfg\n" + "\tlp.tamper_filt2_cfg\n" + "\tlp.act_tamper1_cfg\n" + "\tlp.act_tamper2_cfg\n" + "\tlp.act_tamper3_cfg\n" + "\tlp.act_tamper4_cfg\n" + "\tlp.act_tamper5_cfg\n" + "\tlp.act_tamper_ctl\n" + "\tlp.act_tamper_clk_ctl\n" + "\tlp.act_tamper_routing_ctl1\n" + "\tlp.act_tamper_routing_ctl2\n" + "\n" + "ALL values should be in hexadecimal format"; + +#define NB_REGISTERS 18 +static int do_snvs_cfg(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + int err = 0; + u32 idx = 0; + + struct snvs_security_sc_conf conf = {0}; + + if (argc != (NB_REGISTERS + 1)) + return CMD_RET_USAGE; + + conf.hp.lock = simple_strtoul(argv[++idx], NULL, 16); + conf.hp.secvio_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.lock = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.secvio_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_filt_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_det_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_det_cfg2 = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_filt1_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_filt2_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper1_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper2_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper3_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper4_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper5_cfg = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper_clk_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper_routing_ctl1 = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.act_tamper_routing_ctl2 = simple_strtoul(argv[++idx], NULL, 16); + + err = apply_snvs_config(&conf); + + return err; +} + +U_BOOT_CMD(snvs_cfg, + NB_REGISTERS + 1, 1, do_snvs_cfg, + "Security violation configuration", + snvs_cfg_help_text +); + +static char snvs_dgo_cfg_help_text[] = + "snvs_dgo_cfg\n" + "\ttamper_offset_ctl\n" + "\ttamper_pull_ctl\n" + "\ttamper_ana_test_ctl\n" + "\ttamper_sensor_trim_ctl\n" + "\ttamper_misc_ctl\n" + "\ttamper_core_volt_mon_ctl\n" + "\n" + "ALL values should be in hexadecimal format"; + +static int do_snvs_dgo_cfg(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + int err = 0; + u32 idx = 0; + + struct snvs_dgo_conf conf = {0}; + + if (argc != (6 + 1)) + return CMD_RET_USAGE; + + conf.tamper_offset_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.tamper_pull_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.tamper_ana_test_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.tamper_sensor_trim_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.tamper_misc_ctl = simple_strtoul(argv[++idx], NULL, 16); + conf.tamper_core_volt_mon_ctl = simple_strtoul(argv[++idx], NULL, 16); + + err = apply_snvs_dgo_config(&conf); + + return err; +} + +U_BOOT_CMD(snvs_dgo_cfg, + 7, 1, do_snvs_dgo_cfg, + "SNVS DGO configuration", + snvs_dgo_cfg_help_text +); + +static char tamper_pin_cfg_help_text[] = + "snvs_dgo_cfg\n" + "\tpad\n" + "\tvalue\n" + "\n" + "ALL values should be in hexadecimal format"; + +static int do_tamper_pin_cfg(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + int err = 0; + u32 idx = 0; + + struct tamper_pin_cfg conf = {0}; + + if (argc != (2 + 1)) + return CMD_RET_USAGE; + + conf.pad = simple_strtoul(argv[++idx], NULL, 10); + conf.mux_conf = simple_strtoul(argv[++idx], NULL, 16); + + err = apply_tamper_pin_list_config(&conf, 1); + + return err; +} + +U_BOOT_CMD(tamper_pin_cfg, + 3, 1, do_tamper_pin_cfg, + "tamper pin configuration", + tamper_pin_cfg_help_text +); + +static char snvs_clear_status_help_text[] = + "snvs_clear_status\n" + "\tHPSR\n" + "\tHPSVSR\n" + "\tLPSR\n" + "\tLPTDSR\n" + "\n" + "Write the status registers with the value provided," + " clearing the status"; + +static int do_snvs_clear_status(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + int scierr = 0; + u32 idx = 0; + + struct snvs_security_sc_conf conf = {0}; + + if (argc != (2 + 1)) + return CMD_RET_USAGE; + + conf.lp.status = simple_strtoul(argv[++idx], NULL, 16); + conf.lp.tamper_det_status = simple_strtoul(argv[++idx], NULL, 16); + + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.status), + &conf.lp.status, NULL, NULL, NULL, + NULL, 1); + if (scierr != SC_ERR_NONE) + goto exit; + + scierr = check_write_secvio_config(SC_CONF_OFFSET_OF(lp.tamper_det_status), + &conf.lp.tamper_det_status, NULL, + NULL, NULL, NULL, 1); + if (scierr != SC_ERR_NONE) + goto exit; + +exit: + return (scierr == SC_ERR_NONE) ? 0 : 1; +} + +U_BOOT_CMD(snvs_clear_status, + 3, 1, do_snvs_clear_status, + "snvs clear status", + snvs_clear_status_help_text +); + +static char snvs_sec_status_help_text[] = + "snvs_sec_status\n" + "Display information about the security related to tamper and secvio"; + +static int do_snvs_sec_status(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + int scierr; + u32 idx; + + u32 data[5]; + + u32 pads[] = { + SC_P_CSI_D00, + SC_P_CSI_D01, + SC_P_CSI_D02, + SC_P_CSI_D03, + SC_P_CSI_D04, + SC_P_CSI_D05, + SC_P_CSI_D06, + SC_P_CSI_D07, + SC_P_CSI_HSYNC, + SC_P_CSI_VSYNC, + }; + + u32 fuses[] = { + 14, + 30, + 31, + 260, + 261, + 262, + 263, + 768, + }; + + struct snvs_reg { + u32 id; + u32 nb; + } snvs[] = { + /* Locks */ + {0x0, 1}, + {0x34, 1}, + /* Security violation */ + {0xc, 1}, + {0x10, 1}, + {0x18, 1}, + {0x40, 1}, + /* Temper detectors */ + {0x48, 2}, + {0x4c, 1}, + {0xa4, 1}, + /* */ + {0x44, 3}, + {0xe0, 1}, + {0xe4, 1}, + {0xe8, 2}, + /* Misc */ + {0x3c, 1}, + {0x5c, 2}, + {0x64, 1}, + {0xf8, 2}, + }; + + u32 dgo[] = { + 0x0, + 0x10, + 0x20, + 0x30, + 0x40, + 0x50, + }; + + /* Pins */ + printf("Pins:\n"); + for (idx = 0; idx < ARRAY_SIZE(pads); idx++) { + u8 pad_id = pads[idx]; + + scierr = sc_pad_get(-1, pad_id, &data[0]); + if (scierr == 0) + printf("\t- Pin %d: %.8x\n", pad_id, data[0]); + else + printf("Failed to read Pin %d\n", pad_id); + } + + /* Fuses */ + printf("Fuses:\n"); + for (idx = 0; idx < ARRAY_SIZE(fuses); idx++) { + u32 fuse_id = fuses[idx]; + + scierr = sc_misc_otp_fuse_read(-1, fuse_id, &data[0]); + if (scierr == 0) + printf("\t- Fuse %d: %.8x\n", fuse_id, data[0]); + else + printf("Failed to read Fuse %d\n", fuse_id); + } + + /* SNVS */ + printf("SNVS:\n"); + for (idx = 0; idx < ARRAY_SIZE(snvs); idx++) { + struct snvs_reg *reg = &snvs[idx]; + + scierr = sc_seco_secvio_config(-1, reg->id, 0, &data[0], + &data[1], &data[2], &data[3], + &data[4], reg->nb); + if (scierr == 0) { + int subidx; + + printf("\t- SNVS %.2x(%d):", reg->id, reg->nb); + for (subidx = 0; subidx < reg->nb; subidx++) + printf(" %.8x", data[subidx]); + printf("\n"); + } else { + printf("Failed to read SNVS %d\n", reg->id); + } + } + + /* DGO */ + printf("DGO:\n"); + for (idx = 0; idx < ARRAY_SIZE(dgo); idx++) { + u8 dgo_id = dgo[idx]; + + scierr = sc_seco_secvio_dgo_config(-1, dgo_id, 0, &data[0]); + if (scierr == 0) + printf("\t- DGO %.2x: %.8x\n", dgo_id, data[0]); + else + printf("Failed to read DGO %d\n", dgo_id); + } + + return 0; +} + +U_BOOT_CMD(snvs_sec_status, + 1, 1, do_snvs_sec_status, + "tamper pin configuration", + snvs_sec_status_help_text +); diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c index b96f0da21e..93f0cd827c 100644 --- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -111,6 +112,15 @@ int board_init(void) { board_gpio_init(); +#ifdef CONFIG_IMX_SNVS_SEC_SC_AUTO + { + int ret = snvs_security_sc_init(); + + if (ret) + return ret; + } +#endif + return 0; } diff --git a/drivers/misc/imx8/scu_api.c b/drivers/misc/imx8/scu_api.c index 227bc52873..3e38edbf5d 100644 --- a/drivers/misc/imx8/scu_api.c +++ b/drivers/misc/imx8/scu_api.c @@ -222,6 +222,34 @@ int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val) return ret; } +int sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, u32 *val) +{ + struct udevice *dev = gd->arch.scu_dev; + int size = sizeof(struct sc_rpc_msg_s); + struct sc_rpc_msg_s msg; + int ret; + + if (!dev) + hang(); + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SIZE(&msg) = 2U; + RPC_SVC(&msg) = (u8)(SC_RPC_SVC_PAD); + RPC_FUNC(&msg) = (u8)(PAD_FUNC_GET); + + RPC_U16(&msg, 0U) = (u16)(pad); + + ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size); + if (ret) + printf("%s: pad:%d: res:%d\n", + __func__, pad, RPC_R8(&msg)); + + if (val) + *val = (u32)RPC_U32(&msg, 0U); + + return ret; +} + /* MISC */ int sc_misc_set_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl, u32 val) @@ -996,8 +1024,8 @@ int sc_seco_get_mp_key(sc_ipc_t ipc, sc_faddr_t dst_addr, return ret; } -int sc_seco_update_mpmr(sc_ipc_t ipc, sc_faddr_t addr, uint8_t size_m, - uint8_t lock) +int sc_seco_update_mpmr(sc_ipc_t ipc, sc_faddr_t addr, u8 size_m, + u8 lock) { struct udevice *dev = gd->arch.scu_dev; struct sc_rpc_msg_s msg; @@ -1051,8 +1079,44 @@ int sc_seco_get_mp_sign(sc_ipc_t ipc, sc_faddr_t msg_addr, return ret; } -int sc_seco_secvio_dgo_config(sc_ipc_t ipc, uint8_t id, uint8_t access, - u32 *data) +int sc_seco_secvio_config(sc_ipc_t ipc, u8 id, u8 access, + u32 *data0, u32 *data1, u32 *data2, u32 *data3, + u32 *data4, u8 size) +{ + struct udevice *dev = gd->arch.scu_dev; + struct sc_rpc_msg_s msg; + int msg_size = sizeof(struct sc_rpc_msg_s); + int ret; + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SIZE(&msg) = 7U; + RPC_SVC(&msg) = (u8)(SC_RPC_SVC_SECO); + RPC_FUNC(&msg) = (u8)(SECO_FUNC_SECVIO_CONFIG); + + RPC_U32(&msg, 0U) = (u32)(*data0); + RPC_U32(&msg, 4U) = (u32)(*data1); + RPC_U32(&msg, 8U) = (u32)(*data2); + RPC_U32(&msg, 12U) = (u32)(*data3); + RPC_U32(&msg, 16U) = (u32)(*data4); + RPC_U8(&msg, 20U) = (u8)(id); + RPC_U8(&msg, 21U) = (u8)(access); + RPC_U8(&msg, 22U) = (u8)(size); + + ret = misc_call(dev, SC_FALSE, &msg, msg_size, &msg, msg_size); + if (ret) + printf("%s, id:0x%x, access:%x, res:%d\n", + __func__, id, access, RPC_R8(&msg)); + + *data0 = (u32)RPC_U32(&msg, 0U); + *data1 = (u32)RPC_U32(&msg, 4U); + *data2 = (u32)RPC_U32(&msg, 8U); + *data3 = (u32)RPC_U32(&msg, 12U); + *data4 = (u32)RPC_U32(&msg, 16U); + + return ret; +} + +int sc_seco_secvio_dgo_config(sc_ipc_t ipc, u8 id, u8 access, u32 *data) { struct udevice *dev = gd->arch.scu_dev; struct sc_rpc_msg_s msg;