From: Jonas Schwöbel Date: Wed, 31 Jan 2024 06:57:18 +0000 (+0200) Subject: video: bridge: add basic support for the Parade DP501 transmitter X-Git-Url: http://git.dujemihanovic.xyz/img/static/git-logo.png?a=commitdiff_plain;h=0afdc32d7c6bbc74169caff94541f54f7368aa16;p=u-boot.git video: bridge: add basic support for the Parade DP501 transmitter The Parade DP501 is a DP & DVI/HDMI dual-mode transmitter. It enables an RGB/Parallel SOC output to be converted, packed and serialized into either DP or TMDS output device. Only DisplayPort functionality of this transmitter has been implemented and tested. Signed-off-by: Jonas Schwöbel Signed-off-by: Svyatoslav Ryhel --- diff --git a/drivers/video/bridge/Kconfig b/drivers/video/bridge/Kconfig index 6a9e7c1454..ab91727372 100644 --- a/drivers/video/bridge/Kconfig +++ b/drivers/video/bridge/Kconfig @@ -7,6 +7,16 @@ config VIDEO_BRIDGE requires LVDS, an eDP->LVDS bridge chip can be used to provide the necessary conversion. This option enables support for these devices. +config VIDEO_BRIDGE_PARADE_DP501 + bool "Support Parade DP501 DP & DVI/HDMI dual mode transmitter" + depends on PANEL && DM_GPIO + select DM_I2C + help + The Parade DP501 is a DP & DVI/HDMI dual-mode transmitter. It + enables an RGB/Parallel SOC output to be converted, packed and + serialized into either DP or TMDS output device. Only DisplayPort + functionality of this transmitter has been implemented and tested. + config VIDEO_BRIDGE_PARADE_PS862X bool "Support Parade PS862X DP->LVDS bridge" depends on VIDEO_BRIDGE diff --git a/drivers/video/bridge/Makefile b/drivers/video/bridge/Makefile index ed3e7e9ce1..58697e3cbe 100644 --- a/drivers/video/bridge/Makefile +++ b/drivers/video/bridge/Makefile @@ -4,6 +4,7 @@ # Written by Simon Glass obj-$(CONFIG_VIDEO_BRIDGE) += video-bridge-uclass.o +obj-$(CONFIG_VIDEO_BRIDGE_PARADE_DP501) += dp501.o obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o diff --git a/drivers/video/bridge/dp501.c b/drivers/video/bridge/dp501.c new file mode 100644 index 0000000000..095e3e71fe --- /dev/null +++ b/drivers/video/bridge/dp501.c @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024 Jonas Schwöbel + * Copyright (C) 2024 Svyatoslav Ryhel + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* TOP */ +#define TOPCFG0 0x00 +#define ROMI2C_PRESCALE 0x01 +#define HDCPI2C_PRESCALE 0x02 +#define GPIO 0x03 +#define GPIO_OUT_ENB 0x04 +#define TESTI2C_CTL 0x05 +#define I2CMTIMEOUT 0x06 +#define TOPCFG1 0x07 +#define TOPCFG2 0x08 +#define TOPCFG3 0x09 +#define TOPCFG4 0x0A +#define CLKSWRST 0x0B +#define CADETB_CTL 0x0C + +/* Video Attribute */ +#define HTOTAL_L 0x10 +#define HTOTAL_H 0x11 +#define HSTART_L 0x12 +#define HSTART_H 0x13 +#define HWIDTH_L 0x14 +#define HWIDTH_H 0x15 +#define VTOTAL_L 0x16 +#define VTOTAL_H 0x17 +#define VSTART_L 0x18 +#define VSTART_H 0x19 +#define VHEIGHT_L 0x1A +#define VHEIGHT_H 0x1B +#define HSPHSW_L 0x1C +#define HSPHSW_H 0x1D +#define VSPVSW_L 0x1E +#define VSPVSW_H 0x1F +#define MISC0 0x20 +#define MISC1 0x21 + +/* Video Capture */ +#define VCAPCTRL0 0x24 +#define VCAPCTRL1 0x25 +#define VCAPCTRL2 0x26 +#define VCAPCTRL3 0x27 +#define VCAPCTRL4 0x28 +#define VCAP_MEASURE 0x29 + +/* Main Link Control */ +#define NVID_L 0x2C +#define NVID_M 0x2D +#define NVID_H 0x2E +#define LINK_CTRL0 0x2F +#define LINK_CTRL1 0x30 +#define LINK_DEBUG 0x31 +#define ERR_POS 0x32 +#define ERR_PAT 0x33 +#define LINK_DEB_SEL 0x34 +#define IDLE_PATTERN 0x35 +#define TU_SIZE 0x36 +#define CRC_CTRL 0x37 +#define CRC_OUT 0x38 + +/* AVI-2 InfoFrame */ +#define SD_CTRL0 0x3A +#define SD_CTRL1 0x3B +#define SD_HB0 0x3C +#define SD_HB1 0x3D +#define SD_HB2 0x3E +#define SD_HB3 0x3F +#define SD_DB0 0x40 +#define SD_DB1 0x41 +#define SD_DB2 0x42 +#define SD_DB3 0x43 +#define SD_DB4 0x44 +#define SD_DB5 0x45 +#define SD_DB6 0x46 +#define SD_DB7 0x47 +#define SD_DB8 0x48 +#define SD_DB9 0x49 +#define SD_DB10 0x4A +#define SD_DB11 0x4B +#define SD_DB12 0x4C +#define SD_DB13 0x4D +#define SD_DB14 0x4E +#define SD_DB15 0x4F + +/* Aux Channel and PCS */ +#define DPCD_REV 0X50 +#define MAX_LINK_RATE 0x51 +#define MAX_LANE_COUNT 0x52 +#define MAX_DOWNSPREAD 0x53 +#define NORP 0x54 +#define DOWNSTRMPORT_PRE 0x55 +#define MLINK_CH_CODING 0x56 +#define RCV_P0_CAP0 0x58 +#define RCV_P0_CAP1 0x59 +#define RCV_P1_CAP0 0x5A +#define RCV_P1_CAP1 0x5B +#define DOWNSPREAD_CTL 0x5C +#define LINK_BW 0x5D +#define LANE_CNT 0x5E +#define TRAINING_CTL 0x5F +#define QUALTEST_CTL 0x60 +#define SINK_COUNT 0x61 +#define DEV_SERVICE_IRQ 0x62 +#define LANE01_STATUS 0x63 +#define LANE23_STATUS 0x64 +#define LANE_STATUS_UPDATE 0x65 +#define SINK_STATUS 0x66 +#define AUX_NOISE 0x67 +#define TEST_MODE 0x69 +#define TEST_PATTERN0 0x6A +#define TEST_PATTERN1 0x6B +#define TEST_PATTERN2 0x6C +#define SIGNATURE 0x6D +#define PCSCFG 0x6E +#define AUXCTRL0 0x6f +#define AUXCTRL2 0x70 +#define AUXCTRL1 0x71 +#define HPDCTL0 0x72 +#define HPDCTL1 0x73 +#define LINK_STATE_CTRL 0x74 +#define SWRST 0x75 +#define LINK_IRQ 0x76 +#define AUXIRQ_CTRL 0x77 +#define HPD2_IRQ_CTRL 0x78 +#define SW_TRAIN_CTRL 0x79 +#define SW_DRV_SET 0x7A +#define SW_PRE_SET 0x7B +#define DPCD_ADDR_L 0x7D +#define DPCD_ADDR_M 0x7E +#define DPCD_ADDR_H 0x7F +#define DPCD_LENGTH 0x80 +#define DPCD_WDATA 0x81 +#define DPCD_RDATA 0x82 +#define DPCD_CTL 0x83 +#define DPCD_STATUS 0x84 +#define AUX_STATUS 0x85 +#define I2CTOAUX_RELENGTH 0x86 +#define AUX_RETRY_CTRL 0x87 +#define TIMEOUT_CTRL 0x88 +#define I2CCMD_OPT1 0x89 +#define AUXCMD_ERR_IRQ 0x8A +#define AUXCMD_OPT2 0x8B +#define HDCP_Reserved 0x8C + +/* Audio InfoFrame */ +#define TX_MVID0 0x90 +#define TX_MVID1 0x91 +#define TX_MVID2 0x92 +#define TX_MVID_OFF 0x93 +#define TX_MAUD0 0x94 +#define TX_MAUD1 0x95 +#define TX_MAUD2 0x96 +#define TX_MAUD_OFF 0x97 +#define MN_CTRL 0x98 +#define MOUT0 0x99 +#define MOUT1 0x9A +#define MOUT2 0x9B + +/* Audio Control */ +#define NAUD_L 0x9F +#define NAUD_M 0xA0 +#define NAUD_H 0xA1 +#define AUD_CTRL0 0xA2 +#define AUD_CTRL1 0xA3 +#define LANE_POL 0xAA +#define LANE_EN 0xAB +#define LANE_MAP 0xAC +#define SCR_POLY0 0xAD +#define SCR_POLY1 0xAE +#define PRBS7_POLY 0xAF + +/* Video Pre-process */ +#define MISC_SHDOW 0xB0 +#define VCAPCPCTL0 0xB1 +#define VCAPCPCTL1 0xB2 +#define VCAPCPCTL2 0xB3 +#define CSCPAR 0xB4 +#define I2CTODPCDSTATUS2 0xBA +#define AUXCTL_REG 0xBB + +/* Page 2 */ +#define SEL_PIO1 0x24 +#define SEL_PIO2 0x25 +#define SEL_PIO3 0x26 +#define CHIP_VER_L 0x82 + +struct dp501_priv { + struct udevice *panel; + struct display_timing timing; + + struct udevice *chip2; + + struct udevice *vdd; + struct gpio_desc reset_gpio; + struct gpio_desc enable_gpio; +}; + +static int dp501_sw_init(struct udevice *dev) +{ + struct dp501_priv *priv = dev_get_priv(dev); + int i; + u8 val; + + dm_i2c_reg_write(dev, TOPCFG4, 0x30); + udelay(200); + dm_i2c_reg_write(dev, TOPCFG4, 0x0c); + dm_i2c_reg_write(dev, 0x8f, 0x02); + + /* check for connected panel during 1 msec */ + for (i = 0; i < 5; i++) { + val = dm_i2c_reg_read(dev, 0x8d); + val &= BIT(2); + if (val) + break; + + udelay(200); + } + + if (!val) { + log_debug("%s: panel is not connected!\n", __func__); + return -ENODEV; + } + + dm_i2c_reg_write(priv->chip2, SEL_PIO1, 0x02); + dm_i2c_reg_write(priv->chip2, SEL_PIO2, 0x04); + dm_i2c_reg_write(priv->chip2, SEL_PIO3, 0x10); + + dm_i2c_reg_write(dev, LINK_STATE_CTRL, 0xa0); + dm_i2c_reg_write(dev, 0x8f, 0x02); + dm_i2c_reg_write(dev, TOPCFG1, 0x16); + dm_i2c_reg_write(dev, TOPCFG0, 0x24); + dm_i2c_reg_write(dev, HPD2_IRQ_CTRL, 0x30); + dm_i2c_reg_write(dev, AUXIRQ_CTRL, 0xff); + dm_i2c_reg_write(dev, LINK_IRQ, 0xff); + + /* auto detect DVO timing */ + dm_i2c_reg_write(dev, VCAPCTRL3, 0x30); + + /* reset tpfifo at v blank */ + dm_i2c_reg_write(dev, LINK_CTRL0, 0x82); + + dm_i2c_reg_write(dev, VCAPCTRL4, 0x07); + dm_i2c_reg_write(dev, AUX_RETRY_CTRL, 0x7f); + dm_i2c_reg_write(dev, TIMEOUT_CTRL, 0x1e); + dm_i2c_reg_write(dev, AUXCTL_REG, 0x06); + + /* DPCD readable */ + dm_i2c_reg_write(dev, HPDCTL0, 0xa9); + + /* Scramble on */ + dm_i2c_reg_write(dev, QUALTEST_CTL, 0x00); + + dm_i2c_reg_write(dev, 0x8f, 0x02); + + dm_i2c_reg_write(dev, VCAPCTRL0, 0xc4); + + /* set color depth 8bit (0x00: 6bit; 0x20: 8bit; 0x40: 10bit) */ + dm_i2c_reg_write(dev, MISC0, 0x20); + + dm_i2c_reg_write(dev, VCAPCPCTL2, 0x01); + + /* check if bridge returns ready status */ + for (i = 0; i < 5; i++) { + val = dm_i2c_reg_read(dev, LINK_IRQ); + val &= BIT(0); + if (val) + break; + + udelay(200); + } + + if (!val) { + log_debug("%s: bridge is not ready\n", __func__); + return -ENODEV; + } + + return 0; +} + +static void dpcd_configure(struct udevice *dev, u32 config, bool write) +{ + dm_i2c_reg_write(dev, DPCD_ADDR_L, (u8)(config >> 8)); + dm_i2c_reg_write(dev, DPCD_ADDR_M, (u8)(config >> 16)); + dm_i2c_reg_write(dev, DPCD_ADDR_H, (u8)((config >> 24) | BIT(7))); + dm_i2c_reg_write(dev, DPCD_LENGTH, 0x00); + dm_i2c_reg_write(dev, LINK_IRQ, 0x20); + + if (write) + dm_i2c_reg_write(dev, DPCD_WDATA, (u8)(config & 0xff)); + + dm_i2c_reg_write(dev, DPCD_CTL, 0x01); + + udelay(10); +} + +static int dump_dpcd_data(struct udevice *dev, u32 config, u8 *data) +{ + int i; + u8 value; + + dpcd_configure(dev, config, false); + + value = dm_i2c_reg_read(dev, DPCD_CTL); + if (value) + return -ENODATA; + + for (i = 0; i < 5; i++) { + value = dm_i2c_reg_read(dev, LINK_IRQ); + value &= BIT(5); + if (value) + break; + + udelay(100); + } + + if (!value) + return -ENODATA; + + value = dm_i2c_reg_read(dev, DPCD_STATUS); + if (!(value & 0xe0)) + *data = dm_i2c_reg_read(dev, DPCD_RDATA); + else + return -ENODATA; + + return 0; +} + +static int dp501_dpcd_dump(struct udevice *dev, u32 config, u8 *data) +{ + int i, ret; + + for (i = 0; i < 5; i++) { + ret = dump_dpcd_data(dev, config, data); + if (!ret) + break; + + udelay(100); + } + + return ret; +} + +static int dp501_reset_link(struct udevice *dev) +{ + dm_i2c_reg_write(dev, TRAINING_CTL, 0x00); + dm_i2c_reg_write(dev, SWRST, 0xf8); + dm_i2c_reg_write(dev, SWRST, 0x00); + + return -ENODEV; +} + +static int dp501_link_training(struct udevice *dev) +{ + int i, ret; + u8 lane, link, link_out; + u8 lane_cnt, lane01, lane23; + + dpcd_configure(dev, 0x030000, true); + dpcd_configure(dev, 0x03011c, true); + dpcd_configure(dev, 0x0301f8, true); + + ret = dp501_dpcd_dump(dev, 0x90000100, &link); + if (ret) { + log_debug("%s: link dump failed %d\n", __func__, ret); + return dp501_reset_link(dev); + } + + ret = dp501_dpcd_dump(dev, 0x90000200, &lane); + if (ret) { + log_debug("%s: lane dump failed %d\n", __func__, ret); + return dp501_reset_link(dev); + } + + /* Software trainig */ + for (i = 10; i > 0; i--) { + dm_i2c_reg_write(dev, LINK_BW, link); + dm_i2c_reg_write(dev, LANE_CNT, lane | BIT(7)); + + link_out = dm_i2c_reg_read(dev, LINK_BW); + lane_cnt = dm_i2c_reg_read(dev, LANE_CNT); + + if (link_out == link && + (lane_cnt == (lane | BIT(7)))) + break; + + udelay(500); + } + + if (!i) + return dp501_reset_link(dev); + + dm_i2c_reg_write(dev, LINK_STATE_CTRL, 0x00); + dm_i2c_reg_write(dev, TRAINING_CTL, 0x0d); + + /* check if bridge returns link ready status */ + for (i = 0; i < 100; i++) { + link_out = dm_i2c_reg_read(dev, LINK_IRQ); + link_out &= BIT(1); + if (link_out) { + dm_i2c_reg_write(dev, LINK_IRQ, 0xff); + break; + } + + udelay(100); + } + + if (!link_out) { + log_debug("%s: link prepare failed %d\n", + __func__, link_out); + return dp501_reset_link(dev); + } + + lane01 = dm_i2c_reg_read(dev, LANE01_STATUS); + lane23 = dm_i2c_reg_read(dev, LANE23_STATUS); + + switch (lane_cnt & 0xf) { + case 4: + if (lane01 == 0x77 && + lane23 == 0x77) + return 0; + break; + + case 2: + if (lane01 == 0x77) + return 0; + break; + + default: + if ((lane01 & 7) == 7) + return 0; + break; + } + + return dp501_reset_link(dev); +} + +static int dp501_attach(struct udevice *dev) +{ + struct dp501_priv *priv = dev_get_priv(dev); + int ret; + + ret = dp501_sw_init(dev); + if (ret) + return ret; + + mdelay(90); + + ret = dp501_link_training(dev); + if (ret) + return ret; + + /* Perform panel HW setup */ + return panel_enable_backlight(priv->panel); +} + +static int dp501_set_backlight(struct udevice *dev, int percent) +{ + struct dp501_priv *priv = dev_get_priv(dev); + + return panel_set_backlight(priv->panel, percent); +} + +static int dp501_panel_timings(struct udevice *dev, + struct display_timing *timing) +{ + struct dp501_priv *priv = dev_get_priv(dev); + + memcpy(timing, &priv->timing, sizeof(*timing)); + return 0; +} + +static void dp501_hw_init(struct dp501_priv *priv) +{ + dm_gpio_set_value(&priv->reset_gpio, 1); + + regulator_set_enable_if_allowed(priv->vdd, 1); + dm_gpio_set_value(&priv->enable_gpio, 1); + + udelay(100); + + dm_gpio_set_value(&priv->reset_gpio, 0); + mdelay(80); +} + +static int dp501_setup(struct udevice *dev) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + struct dp501_priv *priv = dev_get_priv(dev); + struct udevice *bus = dev_get_parent(dev); + int ret; + + /* get panel */ + ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, + "panel", &priv->panel); + if (ret) { + log_debug("%s: Cannot get panel: ret=%d\n", __func__, ret); + return log_ret(ret); + } + + /* get regulators */ + ret = device_get_supply_regulator(dev, "power-supply", &priv->vdd); + if (ret) { + log_debug("%s: vddc regulator error: %d\n", __func__, ret); + if (ret != -ENOENT) + return log_ret(ret); + } + + /* get gpios */ + ret = gpio_request_by_name(dev, "reset-gpios", 0, + &priv->reset_gpio, GPIOD_IS_OUT); + if (ret) { + log_debug("%s: Could not decode reset-gpios (%d)\n", + __func__, ret); + return ret; + } + + ret = gpio_request_by_name(dev, "enable-gpios", 0, + &priv->enable_gpio, GPIOD_IS_OUT); + if (ret) { + log_debug("%s: Could not decode enable-gpios (%d)\n", + __func__, ret); + return ret; + } + + ret = i2c_get_chip(bus, chip->chip_addr + 2, 1, &priv->chip2); + if (ret) { + log_debug("%s: cannot get second PMIC I2C chip (err %d)\n", + __func__, ret); + return ret; + } + + dp501_hw_init(priv); + + /* get EDID */ + return panel_get_display_timing(priv->panel, &priv->timing); +} + +static int dp501_probe(struct udevice *dev) +{ + if (device_get_uclass_id(dev->parent) != UCLASS_I2C) + return -EPROTONOSUPPORT; + + return dp501_setup(dev); +} + +struct panel_ops dp501_ops = { + .enable_backlight = dp501_attach, + .set_backlight = dp501_set_backlight, + .get_display_timing = dp501_panel_timings, +}; + +static const struct udevice_id dp501_ids[] = { + { .compatible = "parade,dp501" }, + { } +}; + +U_BOOT_DRIVER(dp501) = { + .name = "dp501", + .id = UCLASS_PANEL, + .of_match = dp501_ids, + .ops = &dp501_ops, + .probe = dp501_probe, + .priv_auto = sizeof(struct dp501_priv), +};