OMAP3: fix twister board

twister board was not updated after changing
SPL defines, resulting in a broken board.

Signed-off-by: Stefano Babic <sbabic@denx.de>

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index efdc70622f3d8bc6207a2df9fa1310b54e85d97b..73ff416aed2a2837ac83ea502cf85ed0e9f32b93 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -207,6 +207,8 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
@@ -219,12 +221,26 @@
 
 #define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
+#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SYS_SPL_MALLOC_START    0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 #define CONFIG_SPL_BSS_START_ADDR      0x8f080000 /* end of RAM */
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
+
+/* FAT */
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME         "uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME           "args"
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x900   /* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x80    /* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
+
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_PAGE_COUNT     64