net: gem: Enable ethernet rx clock for versal

Enable rx clock along with tx clock for versal platform. Use compatible
data to enable/disable clocks in the driver.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index a2a01112018f331ee810af5bcd25ad709421cb25..9ed013ee51247242937c36f5c320d06d914afc06 100644 (file)
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -129,6 +129,8 @@
 #define ZYNQ_GEM_FREQUENCY_100 25000000UL
 #define ZYNQ_GEM_FREQUENCY_1000        125000000UL
 
+#define RXCLK_EN               BIT(0)
+
 /* Device registers */
 struct zynq_gem_regs {
        u32 nwctrl; /* 0x0 - Network Control reg */
@@ -205,10 +207,12 @@ struct zynq_gem_priv {
        struct phy_device *phydev;
        ofnode phy_of_node;
        struct mii_dev *bus;
-       struct clk clk;
+       struct clk rx_clk;
+       struct clk tx_clk;
        u32 max_speed;
        bool int_pcs;
        bool dma_64bit;
+       u32 clk_en_info;
 };
 
 static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum,
@@ -476,18 +480,25 @@ static int zynq_gem_init(struct udevice *dev)
                break;
        }
 
-       ret = clk_set_rate(&priv->clk, clk_rate);
+       ret = clk_set_rate(&priv->tx_clk, clk_rate);
        if (IS_ERR_VALUE(ret)) {
                dev_err(dev, "failed to set tx clock rate\n");
                return ret;
        }
 
-       ret = clk_enable(&priv->clk);
+       ret = clk_enable(&priv->tx_clk);
        if (ret) {
                dev_err(dev, "failed to enable tx clock\n");
                return ret;
        }
 
+       if (priv->clk_en_info & RXCLK_EN) {
+               ret = clk_enable(&priv->rx_clk);
+               if (ret) {
+                       dev_err(dev, "failed to enable rx clock\n");
+                       return ret;
+               }
+       }
        setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
                                        ZYNQ_GEM_NWCTRL_TXEN_MASK);
 
@@ -694,12 +705,20 @@ static int zynq_gem_probe(struct udevice *dev)
        priv->tx_bd = (struct emac_bd *)bd_space;
        priv->rx_bd = (struct emac_bd *)((ulong)bd_space + BD_SEPRN_SPACE);
 
-       ret = clk_get_by_name(dev, "tx_clk", &priv->clk);
+       ret = clk_get_by_name(dev, "tx_clk", &priv->tx_clk);
        if (ret < 0) {
-               dev_err(dev, "failed to get clock\n");
+               dev_err(dev, "failed to get tx_clock\n");
                goto err1;
        }
 
+       if (priv->clk_en_info & RXCLK_EN) {
+               ret = clk_get_by_name(dev, "rx_clk", &priv->rx_clk);
+               if (ret < 0) {
+                       dev_err(dev, "failed to get rx_clock\n");
+                       goto err1;
+               }
+       }
+
        priv->bus = mdio_alloc();
        priv->bus->read = zynq_gem_miiphy_read;
        priv->bus->write = zynq_gem_miiphy_write;
@@ -794,11 +813,13 @@ static int zynq_gem_of_to_plat(struct udevice *dev)
               (ulong)priv->iobase, (ulong)priv->mdiobase, priv->phyaddr,
               phy_string_for_interface(priv->interface));
 
+       priv->clk_en_info = dev_get_driver_data(dev);
+
        return 0;
 }
 
 static const struct udevice_id zynq_gem_ids[] = {
-       { .compatible = "cdns,versal-gem" },
+       { .compatible = "cdns,versal-gem", .data = RXCLK_EN },
        { .compatible = "cdns,zynqmp-gem" },
        { .compatible = "cdns,zynq-gem" },
        { .compatible = "cdns,gem" },