]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mxs: mmc: Fix the MMC driver for MX23
authorMarek Vasut <marex@denx.de>
Tue, 22 Jan 2013 15:01:04 +0000 (15:01 +0000)
committerStefano Babic <sbabic@denx.de>
Mon, 28 Jan 2013 10:43:01 +0000 (11:43 +0100)
The MX23 has different layout of DMA channels. Fix the MMC
driver to support MX23.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
drivers/mmc/mxsmmc.c

index 023dbd5bc24079ca8a0c772d0d502d08084aafb4..a72f66cc7aa301aa51a0686c4ecc1699bf91042f 100644 (file)
@@ -53,6 +53,12 @@ struct mxsmmc_priv {
        struct mxs_dma_desc     *desc;
 };
 
+#if defined(CONFIG_MX23)
+static const unsigned int mxsmmc_id_offset = 1;
+#elif defined(CONFIG_MX28)
+static const unsigned int mxsmmc_id_offset = 0;
+#endif
+
 #define        MXSMMC_MAX_TIMEOUT      10000
 #define MXSMMC_SMALL_TRANSFER  512
 
@@ -131,7 +137,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
        priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
                                (data_count << MXS_DMA_DESC_BYTES_OFFSET);
 
-       dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
+       dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset;
        mxs_dma_desc_append(dmach, priv->desc);
        if (mxs_dma_go(dmach)) {
                bounce_buffer_stop(&bbstate);
@@ -222,14 +228,25 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
                }
 
                ctrl0 |= SSP_CTRL0_DATA_XFER;
+
+               reg = data->blocksize * data->blocks;
+#if defined(CONFIG_MX23)
+               ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK;
+
+               clrsetbits_le32(&ssp_regs->hw_ssp_cmd0,
+                       SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK,
+                       ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) |
+                       ((ffs(data->blocksize) - 1) <<
+                               SSP_CMD0_BLOCK_SIZE_OFFSET));
+#elif defined(CONFIG_MX28)
+               writel(reg, &ssp_regs->hw_ssp_xfer_size);
+
                reg = ((data->blocks - 1) <<
                        SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
                        ((ffs(data->blocksize) - 1) <<
                        SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
                writel(reg, &ssp_regs->hw_ssp_block_size);
-
-               reg = data->blocksize * data->blocks;
-               writel(reg, &ssp_regs->hw_ssp_xfer_size);
+#endif
        }
 
        /* Kick off the command */
@@ -401,7 +418,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
                return -ENOMEM;
        }
 
-       ret = mxs_dma_init_channel(id);
+       ret = mxs_dma_init_channel(id + mxsmmc_id_offset);
        if (ret)
                return ret;