Add sub Kconfig for each SOC in the STM32 CPU family.
It is a preliminary step to introduce a new SOC in the STM32MP family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
dual core A7 for STM32MP157/3, monocore for STM32MP151
endchoice
-if STM32MP15x
-
-config STM32MP15x_STM32IMAGE
- bool "Support STM32 image for generated U-Boot image"
- depends on TFABOOT
- help
- Support of STM32 image generation for SOC STM32MP15x
- for TF-A boot when FIP container is not used
-
-choice
- prompt "STM32MP15x board select"
- optional
-
-config TARGET_ST_STM32MP15x
- bool "STMicroelectronics STM32MP15x boards"
- imply BOOTSTAGE
- imply CMD_BOOTSTAGE
- imply CMD_CLS if CMD_BMP
- imply DISABLE_CONSOLE
- imply PRE_CONSOLE_BUFFER
- imply SILENT_CONSOLE
- help
- target the STMicroelectronics board with SOC STM32MP15x
- managed by board/st/stm32mp1:
- Evalulation board (EV1) or Discovery board (DK1 and DK2).
- The difference between board are managed with devicetree
-
-config TARGET_MICROGEA_STM32MP1
- bool "Engicam MicroGEA STM32MP1 SOM"
- imply BOOTSTAGE
- imply CMD_BOOTSTAGE
- imply CMD_CLS if CMD_BMP
- imply DISABLE_CONSOLE
- imply PRE_CONSOLE_BUFFER
- imply SILENT_CONSOLE
- help
- MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
-
- MicroGEA STM32MP1 MicroDev 2.0:
- * MicroDev 2.0 is a general purpose miniature carrier board with CAN,
- LTE and LVDS panel interfaces.
- * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
- for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
-
- MicroGEA STM32MP1 MicroDev 2.0 7" OF:
- * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
- panel and toucscreen.
- * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
- pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
- Open Frame Solution board.
-
-config TARGET_ICORE_STM32MP1
- bool "Engicam i.Core STM32MP1 SOM"
- imply BOOTSTAGE
- imply CMD_BOOTSTAGE
- imply CMD_CLS if CMD_BMP
- imply DISABLE_CONSOLE
- imply PRE_CONSOLE_BUFFER
- imply SILENT_CONSOLE
- help
- i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
-
- i.Core STM32MP1 EDIMM2.2:
- * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
- * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
- creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
-
- i.Core STM32MP1 C.TOUCH 2.0
- * C.TOUCH 2.0 is a general purpose Carrier board.
- * i.Core STM32MP1 needs to mount on top of this Carrier board
- for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
-
-config TARGET_DH_STM32MP1_PDK2
- bool "DH STM32MP1 PDK2"
- help
- Target the DH PDK2 development kit with STM32MP15x SoM.
-
-endchoice
-
-source "board/st/stm32mp1/Kconfig"
-source "board/dhelectronics/dh_stm32mp1/Kconfig"
-source "board/engicam/stm32mp1/Kconfig"
-endif
-
-config SYS_TEXT_BASE
- default 0xC0100000
-
config NR_DRAM_BANKS
default 1
This command is used to evaluate the secure boot on stm32mp SOC,
it is deactivated by default in real products.
-config PRE_CON_BUF_ADDR
- default 0xC02FF000
-
-config PRE_CON_BUF_SZ
- default 4096
-
-config BOOTSTAGE_STASH_ADDR
- default 0xC3000000
-
-if BOOTCOUNT_GENERIC
-config SYS_BOOTCOUNT_SINGLEWORD
- default y
-
-# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
-config SYS_BOOTCOUNT_ADDR
- default 0x5C00A154
-endif
-
-if DEBUG_UART
-
-config DEBUG_UART_BOARD_INIT
- default y
-
-# debug on UART4 by default
-config DEBUG_UART_BASE
- default 0x40010000
-
-# clock source is HSI on reset
-config DEBUG_UART_CLOCK
- default 64000000
-endif
+source "arch/arm/mach-stm32mp/Kconfig.15x"
source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
endif
--- /dev/null
+if STM32MP15x
+
+config STM32MP15x_STM32IMAGE
+ bool "Support STM32 image for generated U-Boot image"
+ depends on TFABOOT
+ help
+ Support of STM32 image generation for SOC STM32MP15x
+ for TF-A boot when FIP container is not used
+
+choice
+ prompt "STM32MP15x board select"
+ optional
+
+config TARGET_ST_STM32MP15x
+ bool "STMicroelectronics STM32MP15x boards"
+ imply BOOTSTAGE
+ imply CMD_BOOTSTAGE
+ imply CMD_CLS if CMD_BMP
+ imply DISABLE_CONSOLE
+ imply PRE_CONSOLE_BUFFER
+ imply SILENT_CONSOLE
+ help
+ target the STMicroelectronics board with SOC STM32MP15x
+ managed by board/st/stm32mp1:
+ Evalulation board (EV1) or Discovery board (DK1 and DK2).
+ The difference between board are managed with devicetree
+
+config TARGET_DH_STM32MP1_PDK2
+ bool "DH STM32MP1 PDK2"
+ help
+ Target the DH PDK2 development kit with STM32MP15x SoM.
+
+config TARGET_MICROGEA_STM32MP1
+ bool "Engicam MicroGEA STM32MP1 SOM"
+ imply BOOTSTAGE
+ imply CMD_BOOTSTAGE
+ imply CMD_CLS if CMD_BMP
+ imply DISABLE_CONSOLE
+ imply PRE_CONSOLE_BUFFER
+ imply SILENT_CONSOLE
+ help
+ MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
+
+ MicroGEA STM32MP1 MicroDev 2.0:
+ * MicroDev 2.0 is a general purpose miniature carrier board with CAN,
+ LTE and LVDS panel interfaces.
+ * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
+ for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
+
+ MicroGEA STM32MP1 MicroDev 2.0 7" OF:
+ * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
+ panel and toucscreen.
+ * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
+ pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
+ Open Frame Solution board.
+
+config TARGET_ICORE_STM32MP1
+ bool "Engicam i.Core STM32MP1 SOM"
+ imply BOOTSTAGE
+ imply CMD_BOOTSTAGE
+ imply CMD_CLS if CMD_BMP
+ imply DISABLE_CONSOLE
+ imply PRE_CONSOLE_BUFFER
+ imply SILENT_CONSOLE
+ help
+ i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
+
+ i.Core STM32MP1 EDIMM2.2:
+ * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
+ * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
+ creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
+
+ i.Core STM32MP1 C.TOUCH 2.0
+ * C.TOUCH 2.0 is a general purpose Carrier board.
+ * i.Core STM32MP1 needs to mount on top of this Carrier board
+ for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
+
+endchoice
+
+config SYS_TEXT_BASE
+ default 0xC0100000
+
+config PRE_CON_BUF_ADDR
+ default 0xC02FF000
+
+config PRE_CON_BUF_SZ
+ default 4096
+
+config BOOTSTAGE_STASH_ADDR
+ default 0xC3000000
+
+if BOOTCOUNT_GENERIC
+config SYS_BOOTCOUNT_SINGLEWORD
+ default y
+
+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
+config SYS_BOOTCOUNT_ADDR
+ default 0x5C00A154
+endif
+
+if DEBUG_UART
+
+config DEBUG_UART_BOARD_INIT
+ default y
+
+# debug on UART4 by default
+config DEBUG_UART_BASE
+ default 0x40010000
+
+# clock source is HSI on reset
+config DEBUG_UART_CLOCK
+ default 64000000
+endif
+
+source "board/st/stm32mp1/Kconfig"
+source "board/dhelectronics/dh_stm32mp1/Kconfig"
+source "board/engicam/stm32mp1/Kconfig"
+
+endif
CONFIG_SPL_TEXT_BASE=0x2FFC2500
CONFIG_SPL_MMC=y
CONFIG_SPL=y
+CONFIG_CMD_STM32KEY=y
CONFIG_TARGET_ST_STM32MP15x=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
-CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STM32PROG=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_OFFSET=0x480000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_DDR_CACHEABLE_SIZE=0x10000000
+CONFIG_CMD_STM32KEY=y
CONFIG_TARGET_ST_STM32MP15x=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_ENV_OFFSET_REDUND=0x4C0000
-CONFIG_DDR_CACHEABLE_SIZE=0x10000000
-CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STM32PROG=y
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_ENV_OFFSET=0x280000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_DDR_CACHEABLE_SIZE=0x10000000
+CONFIG_CMD_STM32KEY=y
CONFIG_STM32MP15x_STM32IMAGE=y
CONFIG_TARGET_ST_STM32MP15x=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
-CONFIG_DDR_CACHEABLE_SIZE=0x10000000
-CONFIG_CMD_STM32KEY=y
CONFIG_CMD_STM32PROG=y
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_LOAD_ADDR=0xc2000000
projects / u-boot.git / commitdiff
