--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ */
+
+#include <i2c.h>
+#include <log.h>
+#include <malloc.h>
+#include <net.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/octeon_fdt.h>
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-cfg.h>
+#include <mach/cvmx-helper-fdt.h>
+#include <mach/cvmx-helper-gpio.h>
+
+#include <mach/cvmx-smix-defs.h>
+#include <mach/cvmx-mdio.h>
+#include <mach/cvmx-qlm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool sfp_parsed;
+
+static int __cvmx_helper_78xx_parse_phy(struct cvmx_phy_info *phy_info,
+ int ipd_port);
+static int __get_phy_info_from_dt(cvmx_phy_info_t *phy_info, int ipd_port);
+
+/**
+ * Writes to a Microsemi VSC7224 16-bit register
+ *
+ * @param[in] i2c_bus i2c bus data structure (must be enabled)
+ * @param addr Address of VSC7224 on the i2c bus
+ * @param reg 8-bit register number to write to
+ * @param val 16-bit value to write
+ *
+ * @return 0 for success
+ */
+static int cvmx_write_vsc7224_reg(const struct cvmx_fdt_i2c_bus_info *i2c_bus,
+ u8 addr, u8 reg, u16 val)
+{
+ struct udevice *dev;
+ u8 buffer[2];
+ int ret;
+
+ ret = i2c_get_chip(i2c_bus->i2c_bus, addr, 1, &dev);
+ if (ret) {
+ debug("Cannot find I2C device: %d\n", ret);
+ return -1;
+ }
+
+ ret = dm_i2c_write(dev, reg, buffer, 2);
+ if (ret) {
+ debug("Cannot write I2C device: %d\n", ret);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * Writes to a Microsemi VSC7224 16-bit register
+ *
+ * @param[in] i2c_bus i2c bus data structure (must be enabled)
+ * @param addr Address of VSC7224 on the i2c bus
+ * @param reg 8-bit register number to write to
+ *
+ * @return 16-bit value or error if < 0
+ */
+static int cvmx_read_vsc7224_reg(const struct cvmx_fdt_i2c_bus_info *i2c_bus,
+ u8 addr, u8 reg)
+{
+ struct udevice *dev;
+ u8 buffer[2];
+ int ret;
+
+ ret = i2c_get_chip(i2c_bus->i2c_bus, addr, 1, &dev);
+ if (ret) {
+ debug("Cannot find I2C device: %d\n", ret);
+ return -1;
+ }
+
+ ret = dm_i2c_read(dev, reg, buffer, 2);
+ if (ret) {
+ debug("Cannot read I2C device: %d\n", ret);
+ return -1;
+ }
+
+ return (buffer[0] << 8) | buffer[1];
+}
+
+/**
+ * Function called whenever mod_abs/mod_prs has changed for Microsemi VSC7224
+ *
+ * @param sfp pointer to SFP data structure
+ * @param val 1 if absent, 0 if present, otherwise not set
+ * @param data user-defined data
+ *
+ * @return 0 for success, -1 on error
+ */
+int cvmx_sfp_vsc7224_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp, int val,
+ void *data)
+{
+ int err;
+ struct cvmx_sfp_mod_info *mod_info;
+ int length;
+ struct cvmx_vsc7224 *vsc7224;
+ struct cvmx_vsc7224_chan *vsc7224_chan;
+ struct cvmx_vsc7224_tap *taps, *match = NULL;
+ int i;
+
+ debug("%s(%s, %d, %p): Module %s\n", __func__, sfp->name, val, data,
+ val ? "absent" : "present");
+ if (val)
+ return 0;
+
+ /* We're here if we detect that the module is now present */
+ err = cvmx_sfp_read_i2c_eeprom(sfp);
+ if (err) {
+ debug("%s: Error reading the SFP module eeprom for %s\n",
+ __func__, sfp->name);
+ return err;
+ }
+ mod_info = &sfp->sfp_info;
+
+ if (!mod_info->valid || !sfp->valid) {
+ debug("%s: Module data is invalid\n", __func__);
+ return -1;
+ }
+
+ vsc7224_chan = sfp->vsc7224_chan;
+ while (vsc7224_chan) {
+ /* We don't do any rx tuning */
+ if (!vsc7224_chan->is_tx) {
+ vsc7224_chan = vsc7224_chan->next;
+ continue;
+ }
+
+ /* Walk through all the channels */
+ taps = vsc7224_chan->taps;
+ if (mod_info->limiting)
+ length = 0;
+ else
+ length = mod_info->max_copper_cable_len;
+ debug("%s: limiting: %d, length: %d\n", __func__,
+ mod_info->limiting, length);
+
+ /* Find a matching length in the taps table */
+ for (i = 0; i < vsc7224_chan->num_taps; i++) {
+ if (length >= taps->len)
+ match = taps;
+ taps++;
+ }
+ if (!match) {
+ debug("%s(%s, %d, %p): Error: no matching tap for length %d\n",
+ __func__, sfp->name, val, data, length);
+ return -1;
+ }
+ debug("%s(%s): Applying %cx taps to vsc7224 %s:%d for cable length %d+\n",
+ __func__, sfp->name, vsc7224_chan->is_tx ? 't' : 'r',
+ vsc7224_chan->vsc7224->name, vsc7224_chan->lane,
+ match->len);
+ /* Program the taps */
+ vsc7224 = vsc7224_chan->vsc7224;
+ cvmx_write_vsc7224_reg(vsc7224->i2c_bus, vsc7224->i2c_addr,
+ 0x7f, vsc7224_chan->lane);
+ if (!vsc7224_chan->maintap_disable)
+ cvmx_write_vsc7224_reg(vsc7224->i2c_bus,
+ vsc7224->i2c_addr, 0x99,
+ match->main_tap);
+ if (!vsc7224_chan->pretap_disable)
+ cvmx_write_vsc7224_reg(vsc7224->i2c_bus,
+ vsc7224->i2c_addr, 0x9a,
+ match->pre_tap);
+ if (!vsc7224_chan->posttap_disable)
+ cvmx_write_vsc7224_reg(vsc7224->i2c_bus,
+ vsc7224->i2c_addr, 0x9b,
+ match->post_tap);
+
+ /* Re-use val and disable taps if needed */
+ if (vsc7224_chan->maintap_disable ||
+ vsc7224_chan->pretap_disable ||
+ vsc7224_chan->posttap_disable) {
+ val = cvmx_read_vsc7224_reg(vsc7224->i2c_bus,
+ vsc7224->i2c_addr, 0x97);
+ if (vsc7224_chan->maintap_disable)
+ val |= 0x800;
+ if (vsc7224_chan->pretap_disable)
+ val |= 0x1000;
+ if (vsc7224_chan->posttap_disable)
+ val |= 0x400;
+ cvmx_write_vsc7224_reg(vsc7224->i2c_bus,
+ vsc7224->i2c_addr, 0x97, val);
+ }
+ vsc7224_chan = vsc7224_chan->next;
+ }
+
+ return err;
+}
+
+/**
+ * Update the mod_abs and error LED
+ *
+ * @param ipd_port ipd port number
+ * @param link link information
+ */
+static void __cvmx_helper_update_sfp(int ipd_port,
+ struct cvmx_fdt_sfp_info *sfp_info,
+ cvmx_helper_link_info_t link)
+{
+ debug("%s(%d): checking mod_abs\n", __func__, ipd_port);
+
+ cvmx_sfp_check_mod_abs(sfp_info, sfp_info->mod_abs_data);
+}
+
+static void cvmx_sfp_update_link(struct cvmx_fdt_sfp_info *sfp,
+ cvmx_helper_link_info_t link)
+{
+ while (sfp) {
+ debug("%s(%s): checking mod_abs\n", __func__, sfp->name);
+ if (link.s.link_up && sfp->last_mod_abs)
+ cvmx_sfp_check_mod_abs(sfp, sfp->mod_abs_data);
+ sfp = sfp->next_iface_sfp;
+ }
+}
+
+/**
+ * @INTERNAL
+ * This function is used ethernet ports link speed. This functions uses the
+ * device tree information to determine the phy address and type of PHY.
+ * The only supproted PHYs are Marvell and Broadcom.
+ *
+ * @param ipd_port IPD input port associated with the port we want to get link
+ * status for.
+ *
+ * @return The ports link status. If the link isn't fully resolved, this must
+ * return zero.
+ */
+cvmx_helper_link_info_t __cvmx_helper_board_link_get_from_dt(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+ cvmx_phy_info_t *phy_info = NULL;
+ cvmx_phy_info_t local_phy_info;
+ int xiface = 0, index = 0;
+ bool use_inband = false;
+ struct cvmx_fdt_sfp_info *sfp_info;
+ const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob);
+
+ result.u64 = 0;
+
+ if (ipd_port >= 0) {
+ int mode;
+
+ xiface = cvmx_helper_get_interface_num(ipd_port);
+ index = cvmx_helper_get_interface_index_num(ipd_port);
+ mode = cvmx_helper_interface_get_mode(xiface);
+ if (!cvmx_helper_get_port_autonegotiation(xiface, index)) {
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ switch (mode) {
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_QSGMII:
+ case CVMX_HELPER_INTERFACE_MODE_AGL:
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ if (OCTEON_IS_MODEL(OCTEON_CN70XX)) {
+ struct cvmx_xiface xi =
+ cvmx_helper_xiface_to_node_interface(
+ xiface);
+ u64 gbaud = cvmx_qlm_get_gbaud_mhz(0);
+
+ result.s.speed = gbaud * 8 / 10;
+ if (cvmx_qlm_get_dlm_mode(
+ 0, xi.interface) ==
+ CVMX_QLM_MODE_SGMII)
+ result.s.speed >>= 1;
+ else
+ result.s.speed >>= 2;
+ } else {
+ result.s.speed = 1000;
+ }
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ case CVMX_HELPER_INTERFACE_MODE_10G_KR:
+ case CVMX_HELPER_INTERFACE_MODE_XFI:
+ result.s.speed = 10000;
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+ case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
+ result.s.speed = 40000;
+ break;
+ default:
+ break;
+ }
+
+ sfp_info = cvmx_helper_cfg_get_sfp_info(xiface, index);
+ /* Initialize the SFP info if it hasn't already been
+ * done.
+ */
+ if (!sfp_info && !sfp_parsed) {
+ cvmx_sfp_parse_device_tree(fdt_addr);
+ sfp_parsed = true;
+ cvmx_sfp_read_all_modules();
+ sfp_info = cvmx_helper_cfg_get_sfp_info(xiface,
+ index);
+ }
+ /* If the link is down or the link is up but we still
+ * register the module as being absent, re-check
+ * mod_abs.
+ */
+ cvmx_sfp_update_link(sfp_info, result);
+
+ cvmx_helper_update_link_led(xiface, index, result);
+
+ return result;
+ }
+ phy_info = cvmx_helper_get_port_phy_info(xiface, index);
+ if (!phy_info) {
+ debug("%s: phy info not saved in config, allocating for 0x%x:%d\n",
+ __func__, xiface, index);
+
+ phy_info = (cvmx_phy_info_t *)cvmx_bootmem_alloc(
+ sizeof(*phy_info), 0);
+ if (!phy_info) {
+ debug("%s: Out of memory\n", __func__);
+ return result;
+ }
+ memset(phy_info, 0, sizeof(*phy_info));
+ phy_info->phy_addr = -1;
+ debug("%s: Setting phy info for 0x%x:%d to %p\n",
+ __func__, xiface, index, phy_info);
+ cvmx_helper_set_port_phy_info(xiface, index, phy_info);
+ }
+ } else {
+ /* For management ports we don't store the PHY information
+ * so we use a local copy instead.
+ */
+ phy_info = &local_phy_info;
+ memset(phy_info, 0, sizeof(*phy_info));
+ phy_info->phy_addr = -1;
+ }
+
+ if (phy_info->phy_addr == -1) {
+ if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
+ if (__cvmx_helper_78xx_parse_phy(phy_info, ipd_port)) {
+ phy_info->phy_addr = -1;
+ use_inband = true;
+ }
+ } else if (__get_phy_info_from_dt(phy_info, ipd_port) < 0) {
+ phy_info->phy_addr = -1;
+ use_inband = true;
+ }
+ }
+
+ /* If we can't get the PHY info from the device tree then try
+ * the inband state.
+ */
+ if (use_inband) {
+ result.s.full_duplex = 1;
+ result.s.link_up = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+
+ if (phy_info->phy_addr < 0)
+ return result;
+
+ if (phy_info->link_function)
+ result = phy_info->link_function(phy_info);
+ else
+ result = cvmx_helper_link_get(ipd_port);
+
+ sfp_info = cvmx_helper_cfg_get_sfp_info(xiface, index);
+ while (sfp_info) {
+ /* If the link is down or the link is up but we still register
+ * the module as being absent, re-check mod_abs.
+ */
+ if (!result.s.link_up ||
+ (result.s.link_up && sfp_info->last_mod_abs))
+ __cvmx_helper_update_sfp(ipd_port, sfp_info, result);
+ sfp_info = sfp_info->next_iface_sfp;
+ }
+
+ return result;
+}
+
+cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+
+ /* Unless we fix it later, all links are defaulted to down */
+ result.u64 = 0;
+
+ return __cvmx_helper_board_link_get_from_dt(ipd_port);
+}
+
+void cvmx_helper_update_link_led(int xiface, int index,
+ cvmx_helper_link_info_t result)
+{
+}
+
+void cvmx_helper_leds_show_error(struct cvmx_phy_gpio_leds *leds, bool error)
+{
+}
+
+int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
+{
+ return supported_ports;
+}
+
+/**
+ * Returns the Ethernet node offset in the device tree
+ *
+ * @param fdt_addr - pointer to flat device tree in memory
+ * @param aliases - offset of alias in device tree
+ * @param ipd_port - ipd port number to look up
+ *
+ * @returns offset of Ethernet node if >= 0, error if -1
+ */
+int __pip_eth_node(const void *fdt_addr, int aliases, int ipd_port)
+{
+ char name_buffer[20];
+ const char *pip_path;
+ int pip, iface, eth;
+ int interface_num = cvmx_helper_get_interface_num(ipd_port);
+ int interface_index = cvmx_helper_get_interface_index_num(ipd_port);
+ cvmx_helper_interface_mode_t interface_mode =
+ cvmx_helper_interface_get_mode(interface_num);
+
+ /* The following are not found in the device tree */
+ switch (interface_mode) {
+ case CVMX_HELPER_INTERFACE_MODE_ILK:
+ case CVMX_HELPER_INTERFACE_MODE_LOOP:
+ case CVMX_HELPER_INTERFACE_MODE_SRIO:
+ debug("ERROR: No node expected for interface: %d, port: %d, mode: %s\n",
+ interface_index, ipd_port,
+ cvmx_helper_interface_mode_to_string(interface_mode));
+ return -1;
+ default:
+ break;
+ }
+ pip_path = (const char *)fdt_getprop(fdt_addr, aliases, "pip", NULL);
+ if (!pip_path) {
+ debug("ERROR: pip path not found in device tree\n");
+ return -1;
+ }
+ pip = fdt_path_offset(fdt_addr, pip_path);
+ debug("ipdd_port=%d pip_path=%s pip=%d ", ipd_port, pip_path, pip);
+ if (pip < 0) {
+ debug("ERROR: pip not found in device tree\n");
+ return -1;
+ }
+ snprintf(name_buffer, sizeof(name_buffer), "interface@%d",
+ interface_num);
+ iface = fdt_subnode_offset(fdt_addr, pip, name_buffer);
+ debug("iface=%d ", iface);
+ if (iface < 0) {
+ debug("ERROR : pip intf %d not found in device tree\n",
+ interface_num);
+ return -1;
+ }
+ snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x",
+ interface_index);
+ eth = fdt_subnode_offset(fdt_addr, iface, name_buffer);
+ debug("eth=%d\n", eth);
+ if (eth < 0) {
+ debug("ERROR : pip interface@%d ethernet@%d not found in device tree\n",
+ interface_num, interface_index);
+ return -1;
+ }
+ return eth;
+}
+
+int __mix_eth_node(const void *fdt_addr, int aliases, int interface_index)
+{
+ char name_buffer[20];
+ const char *mix_path;
+ int mix;
+
+ snprintf(name_buffer, sizeof(name_buffer), "mix%d", interface_index);
+ mix_path =
+ (const char *)fdt_getprop(fdt_addr, aliases, name_buffer, NULL);
+ if (!mix_path) {
+ debug("ERROR: mix%d path not found in device tree\n",
+ interface_index);
+ }
+ mix = fdt_path_offset(fdt_addr, mix_path);
+ if (mix < 0) {
+ debug("ERROR: %s not found in device tree\n", mix_path);
+ return -1;
+ }
+ return mix;
+}
+
+static int __mdiobus_addr_to_unit(u32 addr)
+{
+ int unit = (addr >> 7) & 3;
+
+ if (!OCTEON_IS_MODEL(OCTEON_CN68XX) && !OCTEON_IS_MODEL(OCTEON_CN78XX))
+ unit >>= 1;
+ return unit;
+}
+
+/**
+ * Parse the muxed MDIO interface information from the device tree
+ *
+ * @param phy_info - pointer to phy info data structure to update
+ * @param mdio_offset - offset of MDIO bus
+ * @param mux_offset - offset of MUX, parent of mdio_offset
+ *
+ * @return 0 for success or -1
+ */
+static int __get_muxed_mdio_info_from_dt(cvmx_phy_info_t *phy_info,
+ int mdio_offset, int mux_offset)
+{
+ const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob);
+ int phandle;
+ int smi_offset;
+ int gpio_offset;
+ u64 smi_addr = 0;
+ int len;
+ u32 *pgpio_handle;
+ int gpio_count = 0;
+ u32 *prop_val;
+ int offset;
+ const char *prop_name;
+
+ debug("%s(%p, 0x%x, 0x%x)\n", __func__, phy_info, mdio_offset,
+ mux_offset);
+
+ /* Get register value to put onto the GPIO lines to select */
+ phy_info->gpio_value =
+ cvmx_fdt_get_int(fdt_addr, mdio_offset, "reg", -1);
+ if (phy_info->gpio_value < 0) {
+ debug("Could not get register value for muxed MDIO bus from DT\n");
+ return -1;
+ }
+
+ smi_offset = cvmx_fdt_lookup_phandle(fdt_addr, mux_offset,
+ "mdio-parent-bus");
+ if (smi_offset < 0) {
+ debug("Invalid SMI offset for muxed MDIO interface in device tree\n");
+ return -1;
+ }
+ smi_addr = cvmx_fdt_get_uint64(fdt_addr, smi_offset, "reg", 0);
+
+ /* Convert SMI address to a MDIO interface */
+ switch (smi_addr) {
+ case 0x1180000001800:
+ case 0x1180000003800: /* 68XX address */
+ phy_info->mdio_unit = 0;
+ break;
+ case 0x1180000001900:
+ case 0x1180000003880:
+ phy_info->mdio_unit = 1;
+ break;
+ case 0x1180000003900:
+ phy_info->mdio_unit = 2;
+ break;
+ case 0x1180000003980:
+ phy_info->mdio_unit = 3;
+ break;
+ default:
+ phy_info->mdio_unit = 1;
+ break;
+ }
+ /* Find the GPIO MUX controller */
+ pgpio_handle =
+ (u32 *)fdt_getprop(fdt_addr, mux_offset, "gpios", &len);
+ if (!pgpio_handle || len < 12 || (len % 12) != 0 ||
+ len > CVMX_PHY_MUX_MAX_GPIO * 12) {
+ debug("Invalid GPIO for muxed MDIO controller in DT\n");
+ return -1;
+ }
+
+ for (gpio_count = 0; gpio_count < len / 12; gpio_count++) {
+ phandle = fdt32_to_cpu(pgpio_handle[gpio_count * 3]);
+ phy_info->gpio[gpio_count] =
+ fdt32_to_cpu(pgpio_handle[gpio_count * 3 + 1]);
+ gpio_offset = fdt_node_offset_by_phandle(fdt_addr, phandle);
+ if (gpio_offset < 0) {
+ debug("Cannot access parent GPIO node in DT\n");
+ return -1;
+ }
+ if (!fdt_node_check_compatible(fdt_addr, gpio_offset,
+ "cavium,octeon-3860-gpio")) {
+ phy_info->gpio_type[gpio_count] = GPIO_OCTEON;
+ } else if (!fdt_node_check_compatible(fdt_addr, gpio_offset,
+ "nxp,pca8574")) {
+ /* GPIO is a TWSI GPIO unit which might sit behind
+ * another mux.
+ */
+ phy_info->gpio_type[gpio_count] = GPIO_PCA8574;
+ prop_val = (u32 *)fdt_getprop(
+ fdt_addr, gpio_offset, "reg", NULL);
+ if (!prop_val) {
+ debug("Could not find TWSI address of npx pca8574 GPIO from DT\n");
+ return -1;
+ }
+ /* Get the TWSI address of the GPIO unit */
+ phy_info->cvmx_gpio_twsi[gpio_count] =
+ fdt32_to_cpu(*prop_val);
+ /* Get the selector on the GPIO mux if present */
+ offset = fdt_parent_offset(fdt_addr, gpio_offset);
+ prop_val = (u32 *)fdt_getprop(fdt_addr, offset,
+ "reg", NULL);
+ if (prop_val) {
+ phy_info->gpio_parent_mux_select =
+ fdt32_to_cpu(*prop_val);
+ /* Go up another level */
+ offset = fdt_parent_offset(fdt_addr, offset);
+ if (!fdt_node_check_compatible(fdt_addr, offset,
+ "nxp,pca9548")) {
+ prop_val = (u32 *)fdt_getprop(
+ fdt_addr, offset, "reg", NULL);
+ if (!prop_val) {
+ debug("Could not read MUX TWSI address from DT\n");
+ return -1;
+ }
+ phy_info->gpio_parent_mux_twsi =
+ fdt32_to_cpu(*prop_val);
+ }
+ }
+ } else {
+ prop_name = (char *)fdt_getprop(fdt_addr, gpio_offset,
+ "compatible", NULL);
+ debug("Unknown GPIO type %s\n", prop_name);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Converts a BGX address to the node, interface and port number
+ *
+ * @param bgx_addr Address of CSR register
+ *
+ * @return node, interface and port number, will be -1 for invalid address.
+ */
+static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr)
+{
+ struct cvmx_xiface xi = { -1, -1 };
+
+ xi.node = cvmx_csr_addr_to_node(bgx_addr);
+ bgx_addr = cvmx_csr_addr_strip_node(bgx_addr);
+ if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) {
+ debug("%s: Invalid BGX address 0x%llx\n", __func__,
+ (unsigned long long)bgx_addr);
+ xi.node = -1;
+ return xi;
+ }
+ xi.interface = (bgx_addr >> 24) & 0x0F;
+
+ return xi;
+}
+
+static cvmx_helper_link_info_t
+__get_marvell_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+ int phy_status;
+ u32 phy_addr = phy_info->phy_addr;
+
+ result.u64 = 0;
+ /* Set to page 0 */
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, 22, 0);
+ /* All the speed information can be read from register 17 in one go. */
+ phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
+
+ /* If the resolve bit 11 isn't set, see if autoneg is turned off
+ * (bit 12, reg 0). The resolve bit doesn't get set properly when
+ * autoneg is off, so force it
+ */
+ if ((phy_status & (1 << 11)) == 0) {
+ int auto_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0);
+ if ((auto_status & (1 << 12)) == 0)
+ phy_status |= 1 << 11;
+ }
+
+ /* Link is up = Speed/Duplex Resolved + RT-Link Up + G-Link Up. */
+ if ((phy_status & 0x0c08) == 0x0c08) {
+ result.s.link_up = 1;
+ result.s.full_duplex = ((phy_status >> 13) & 1);
+ switch ((phy_status >> 14) & 3) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ }
+ return result;
+}
+
+/**
+ * @INTERNAL
+ * Get link state of broadcom PHY
+ *
+ * @param phy_info PHY information
+ */
+static cvmx_helper_link_info_t
+__get_broadcom_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+ u32 phy_addr = phy_info->phy_addr;
+ int phy_status;
+
+ result.u64 = 0;
+ /* Below we are going to read SMI/MDIO register 0x19 which works
+ * on Broadcom parts
+ */
+ phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x19);
+ switch ((phy_status >> 8) & 0x7) {
+ case 0:
+ result.u64 = 0;
+ break;
+ case 1:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 10;
+ break;
+ case 2:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 10;
+ break;
+ case 3:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 100;
+ break;
+ case 4:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 5:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 6:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 1000;
+ break;
+ case 7:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ break;
+ }
+ return result;
+}
+
+/**
+ * @INTERNAL
+ * Get link state of generic gigabit PHY
+ *
+ * @param phy_info - information about the PHY
+ *
+ * @returns link status of the PHY
+ */
+static cvmx_helper_link_info_t
+__cvmx_get_generic_8023_c22_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+ u32 phy_addr = phy_info->phy_addr;
+ int phy_basic_control; /* Register 0x0 */
+ int phy_basic_status; /* Register 0x1 */
+ int phy_anog_adv; /* Register 0x4 */
+ int phy_link_part_avail; /* Register 0x5 */
+ int phy_control; /* Register 0x9 */
+ int phy_status; /* Register 0xA */
+
+ result.u64 = 0;
+
+ phy_basic_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 1);
+ if (!(phy_basic_status & 0x4)) /* Check if link is up */
+ return result; /* Link is down, return link down */
+
+ result.s.link_up = 1;
+ phy_basic_control = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0);
+ /* Check if autonegotiation is enabled and completed */
+ if ((phy_basic_control & (1 << 12)) && (phy_basic_status & (1 << 5))) {
+ phy_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0xA);
+ phy_control =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x9);
+
+ phy_status &= phy_control << 2;
+ phy_link_part_avail =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x5);
+ phy_anog_adv =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x4);
+ phy_link_part_avail &= phy_anog_adv;
+
+ if (phy_status & 0xC00) { /* Gigabit full or half */
+ result.s.speed = 1000;
+ result.s.full_duplex = !!(phy_status & 0x800);
+ } else if (phy_link_part_avail &
+ 0x0180) { /* 100 full or half */
+ result.s.speed = 100;
+ result.s.full_duplex = !!(phy_link_part_avail & 0x100);
+ } else if (phy_link_part_avail & 0x0060) {
+ result.s.speed = 10;
+ result.s.full_duplex = !!(phy_link_part_avail & 0x0040);
+ }
+ } else {
+ /* Not autonegotiated */
+ result.s.full_duplex = !!(phy_basic_control & (1 << 8));
+
+ if (phy_basic_control & (1 << 6))
+ result.s.speed = 1000;
+ else if (phy_basic_control & (1 << 13))
+ result.s.speed = 100;
+ else
+ result.s.speed = 10;
+ }
+ return result;
+}
+
+static cvmx_helper_link_info_t
+__cvmx_get_qualcomm_s17_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+ u32 phy_addr = phy_info->phy_addr;
+ int phy_status;
+ int auto_status;
+
+ result.u64 = 0;
+
+ phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
+
+ /* If bit 11 isn't set see if autonegotiation is turned off
+ * (bit 12, reg 0). The resolved bit doesn't get set properly when
+ * autonegotiation is off, so force it.
+ */
+ if ((phy_status & (1 << 11)) == 0) {
+ auto_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0);
+ if ((auto_status & (1 << 12)) == 0)
+ phy_status |= 1 << 11;
+ }
+ /* Only return a link if the PHY has finished autonegotiation and set
+ * the resolved bit (bit 11).
+ */
+ if (phy_status & (1 << 11)) {
+ result.s.link_up = 1;
+ result.s.full_duplex = !!(phy_status & (1 << 13));
+ switch ((phy_status >> 14) & 3) {
+ case 0: /* 10Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1Gbps */
+ result.s.speed = 1000;
+ break;
+ default: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ }
+ debug(" link: %s, duplex: %s, speed: %lu\n",
+ result.s.link_up ? "up" : "down",
+ result.s.full_duplex ? "full" : "half",
+ (unsigned long)result.s.speed);
+ return result;
+}
+
+static cvmx_helper_link_info_t
+__get_generic_8023_c45_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+ int phy_status;
+ int pma_ctrl1;
+ u32 phy_addr = phy_info->phy_addr;
+
+ result.u64 = 0;
+ pma_ctrl1 = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 1, 0);
+ if ((pma_ctrl1 & 0x207c) == 0x2040)
+ result.s.speed = 10000;
+ /* PMA Status 1 (1x0001) */
+ phy_status = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 1, 0xa);
+ if (phy_status < 0)
+ return result;
+
+ result.s.full_duplex = 1;
+ if ((phy_status & 1) == 0)
+ return result;
+ phy_status = cvmx_mdio_45_read(phy_addr >> 8, phy_addr & 0xff, 4, 0x18);
+ if (phy_status < 0)
+ return result;
+ result.s.link_up = (phy_status & 0x1000) ? 1 : 0;
+
+ return result;
+}
+
+static cvmx_helper_link_info_t
+__cvmx_get_cortina_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+}
+
+static cvmx_helper_link_info_t
+__get_vitesse_vsc8490_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+}
+
+static cvmx_helper_link_info_t
+__get_aquantia_phy_link_state(cvmx_phy_info_t *phy_info)
+{
+ cvmx_helper_link_info_t result;
+
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+}
+
+static int __cvmx_helper_78xx_parse_phy(struct cvmx_phy_info *phy_info,
+ int ipd_port)
+{
+ const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob);
+ const char *compat;
+ int phy;
+ int parent;
+ u64 mdio_base;
+ int node, bus;
+ int phy_addr;
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ int xiface = cvmx_helper_get_interface_num(ipd_port);
+ int compat_len = 0;
+
+ debug("%s(0x%p, %d) ENTER\n", __func__, phy_info, ipd_port);
+
+ phy = cvmx_helper_get_phy_fdt_node_offset(xiface, index);
+ debug("%s: xiface: 0x%x, index: %d, ipd_port: %d, phy fdt offset: %d\n",
+ __func__, xiface, index, ipd_port, phy);
+ if (phy < 0) {
+ /* If this is the first time through we need to first parse the
+ * device tree to get the node offsets.
+ */
+ debug("No config present, calling __cvmx_helper_parse_bgx_dt\n");
+ if (__cvmx_helper_parse_bgx_dt(fdt_addr)) {
+ printf("Error: could not parse BGX device tree\n");
+ return -1;
+ }
+ if (__cvmx_fdt_parse_vsc7224(fdt_addr)) {
+ debug("Error: could not parse Microsemi VSC7224 in DT\n");
+ return -1;
+ }
+ if (octeon_has_feature(OCTEON_FEATURE_BGX_XCV) &&
+ __cvmx_helper_parse_bgx_rgmii_dt(fdt_addr)) {
+ printf("Error: could not parse BGX XCV device tree\n");
+ return -1;
+ }
+ phy = cvmx_helper_get_phy_fdt_node_offset(xiface, index);
+ if (phy < 0) {
+ debug("%s: Could not get PHY node offset for IPD port 0x%x, xiface: 0x%x, index: %d\n",
+ __func__, ipd_port, xiface, index);
+ return -1;
+ }
+ debug("%s: phy: %d (%s)\n", __func__, phy,
+ fdt_get_name(fdt_addr, phy, NULL));
+ }
+
+ compat = (const char *)fdt_getprop(fdt_addr, phy, "compatible",
+ &compat_len);
+ if (!compat) {
+ printf("ERROR: %d:%d:no compatible prop in phy\n", xiface,
+ index);
+ return -1;
+ }
+
+ debug(" compatible: %s\n", compat);
+
+ phy_info->fdt_offset = phy;
+ phy_addr = cvmx_fdt_get_int(fdt_addr, phy, "reg", -1);
+ if (phy_addr == -1) {
+ printf("Error: %d:%d:could not get PHY address\n", xiface,
+ index);
+ return -1;
+ }
+ debug(" PHY address: %d, compat: %s\n", phy_addr, compat);
+
+ if (!memcmp("marvell", compat, strlen("marvell"))) {
+ phy_info->phy_type = MARVELL_GENERIC_PHY;
+ phy_info->link_function = __get_marvell_phy_link_state;
+ } else if (!memcmp("broadcom", compat, strlen("broadcom"))) {
+ phy_info->phy_type = BROADCOM_GENERIC_PHY;
+ phy_info->link_function = __get_broadcom_phy_link_state;
+ } else if (!memcmp("cortina", compat, strlen("cortina"))) {
+ phy_info->phy_type = CORTINA_PHY;
+ phy_info->link_function = __cvmx_get_cortina_phy_link_state;
+ } else if (!strcmp("vitesse,vsc8490", compat)) {
+ phy_info->phy_type = VITESSE_VSC8490_PHY;
+ phy_info->link_function = __get_vitesse_vsc8490_phy_link_state;
+ } else if (fdt_stringlist_contains(compat, compat_len,
+ "ethernet-phy-ieee802.3-c22")) {
+ phy_info->phy_type = GENERIC_8023_C22_PHY;
+ phy_info->link_function =
+ __cvmx_get_generic_8023_c22_phy_link_state;
+ } else if (fdt_stringlist_contains(compat, compat_len,
+ "ethernet-phy-ieee802.3-c45")) {
+ phy_info->phy_type = GENERIC_8023_C22_PHY;
+ phy_info->link_function = __get_generic_8023_c45_phy_link_state;
+ }
+
+ phy_info->ipd_port = ipd_port;
+ phy_info->phy_sub_addr = 0;
+ phy_info->direct_connect = 1;
+
+ parent = fdt_parent_offset(fdt_addr, phy);
+ if (!fdt_node_check_compatible(fdt_addr, parent,
+ "ethernet-phy-nexus")) {
+ debug(" nexus PHY found\n");
+ if (phy_info->phy_type == CORTINA_PHY) {
+ /* The Cortina CS422X uses the same PHY device for
+ * multiple ports for XFI. In this case we use a
+ * nexus and each PHY address is the slice or
+ * sub-address and the actual PHY address is the
+ * nexus address.
+ */
+ phy_info->phy_sub_addr = phy_addr;
+ phy_addr =
+ cvmx_fdt_get_int(fdt_addr, parent, "reg", -1);
+ debug(" Cortina PHY real address: 0x%x\n", phy_addr);
+ }
+ parent = fdt_parent_offset(fdt_addr, parent);
+ }
+
+ debug(" Parent: %s\n", fdt_get_name(fdt_addr, parent, NULL));
+ if (!fdt_node_check_compatible(fdt_addr, parent,
+ "cavium,octeon-3860-mdio")) {
+ debug(" Found Octeon MDIO\n");
+ mdio_base = cvmx_fdt_get_uint64(fdt_addr, parent, "reg",
+ FDT_ADDR_T_NONE);
+ debug(" MDIO address: 0x%llx\n",
+ (unsigned long long)mdio_base);
+
+ mdio_base = cvmx_fdt_translate_address(fdt_addr, parent,
+ (u32 *)&mdio_base);
+ debug(" Translated: 0x%llx\n", (unsigned long long)mdio_base);
+ if (mdio_base == FDT_ADDR_T_NONE) {
+ printf("Could not get MDIO base address from reg field\n");
+ return -1;
+ }
+ __cvmx_mdio_addr_to_node_bus(mdio_base, &node, &bus);
+ if (bus < 0) {
+ printf("Invalid MDIO address 0x%llx, could not detect bus and node\n",
+ (unsigned long long)mdio_base);
+ return -1;
+ }
+ debug(" MDIO node: %d, bus: %d\n", node, bus);
+ phy_info->mdio_unit = (node << 2) | (bus & 3);
+ phy_info->phy_addr = phy_addr | (phy_info->mdio_unit << 8);
+ } else {
+ printf("%s: Error: incompatible MDIO bus %s for IPD port %d\n",
+ __func__,
+ (const char *)fdt_get_name(fdt_addr, parent, NULL),
+ ipd_port);
+ return -1;
+ }
+
+ debug("%s: EXIT 0\n", __func__);
+
+ return 0;
+}
+
+/**
+ * Return the MII PHY address associated with the given IPD
+ * port. The phy address is obtained from the device tree.
+ *
+ * @param[out] phy_info - PHY information data structure updated
+ * @param ipd_port Octeon IPD port to get the MII address for.
+ *
+ * @return MII PHY address and bus number, -1 on error, -2 if PHY info missing (OK).
+ */
+static int __get_phy_info_from_dt(cvmx_phy_info_t *phy_info, int ipd_port)
+{
+ const void *fdt_addr = CASTPTR(const void *, gd->fdt_blob);
+ int aliases, eth, phy, phy_parent, ret, i;
+ int mdio_parent;
+ const char *phy_compatible_str;
+ const char *host_mode_str = NULL;
+ int interface;
+ int phy_addr_offset = 0;
+
+ debug("%s(%p, %d)\n", __func__, phy_info, ipd_port);
+
+ if (octeon_has_feature(OCTEON_FEATURE_BGX))
+ return __cvmx_helper_78xx_parse_phy(phy_info, ipd_port);
+
+ phy_info->phy_addr = -1;
+ phy_info->phy_sub_addr = 0;
+ phy_info->ipd_port = ipd_port;
+ phy_info->direct_connect = -1;
+ phy_info->phy_type = (cvmx_phy_type_t)-1;
+ for (i = 0; i < CVMX_PHY_MUX_MAX_GPIO; i++)
+ phy_info->gpio[i] = -1;
+ phy_info->mdio_unit = -1;
+ phy_info->gpio_value = -1;
+ phy_info->gpio_parent_mux_twsi = -1;
+ phy_info->gpio_parent_mux_select = -1;
+ phy_info->link_function = NULL;
+ phy_info->fdt_offset = -1;
+ if (!fdt_addr) {
+ debug("No device tree found.\n");
+ return -1;
+ }
+
+ aliases = fdt_path_offset(fdt_addr, "/aliases");
+ if (aliases < 0) {
+ debug("Error: No /aliases node in device tree.\n");
+ return -1;
+ }
+ if (ipd_port < 0) {
+ int interface_index =
+ ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
+ eth = __mix_eth_node(fdt_addr, aliases, interface_index);
+ } else {
+ eth = __pip_eth_node(fdt_addr, aliases, ipd_port);
+ }
+ if (eth < 0) {
+ debug("ERROR : cannot find interface for ipd_port=%d\n",
+ ipd_port);
+ return -1;
+ }
+
+ interface = cvmx_helper_get_interface_num(ipd_port);
+ /* Get handle to phy */
+ phy = cvmx_fdt_lookup_phandle(fdt_addr, eth, "phy-handle");
+ if (phy < 0) {
+ cvmx_helper_interface_mode_t if_mode;
+
+ /* Note that it's OK for RXAUI and ILK to not have a PHY
+ * connected (i.e. EBB boards in loopback).
+ */
+ debug("Cannot get phy-handle for ipd_port: %d\n", ipd_port);
+ if_mode = cvmx_helper_interface_get_mode(interface);
+ if (if_mode != CVMX_HELPER_INTERFACE_MODE_RXAUI &&
+ if_mode != CVMX_HELPER_INTERFACE_MODE_ILK) {
+ debug("ERROR : phy handle not found in device tree ipd_port=%d\n",
+ ipd_port);
+ return -1;
+ } else {
+ return -2;
+ }
+ }
+
+ phy_compatible_str =
+ (const char *)fdt_getprop(fdt_addr, phy, "compatible", NULL);
+ if (!phy_compatible_str) {
+ debug("ERROR: no compatible prop in phy\n");
+ return -1;
+ }
+ debug("Checking compatible string \"%s\" for ipd port %d\n",
+ phy_compatible_str, ipd_port);
+ phy_info->fdt_offset = phy;
+ if (!memcmp("marvell", phy_compatible_str, strlen("marvell"))) {
+ debug("Marvell PHY detected for ipd_port %d\n", ipd_port);
+ phy_info->phy_type = MARVELL_GENERIC_PHY;
+ phy_info->link_function = __get_marvell_phy_link_state;
+ } else if (!memcmp("broadcom", phy_compatible_str,
+ strlen("broadcom"))) {
+ phy_info->phy_type = BROADCOM_GENERIC_PHY;
+ phy_info->link_function = __get_broadcom_phy_link_state;
+ debug("Broadcom PHY detected for ipd_port %d\n", ipd_port);
+ } else if (!memcmp("vitesse", phy_compatible_str, strlen("vitesse"))) {
+ debug("Vitesse PHY detected for ipd_port %d\n", ipd_port);
+ if (!fdt_node_check_compatible(fdt_addr, phy,
+ "vitesse,vsc8490")) {
+ phy_info->phy_type = VITESSE_VSC8490_PHY;
+ debug("Vitesse VSC8490 detected\n");
+ phy_info->link_function =
+ __get_vitesse_vsc8490_phy_link_state;
+ } else if (!fdt_node_check_compatible(
+ fdt_addr, phy,
+ "ethernet-phy-ieee802.3-c22")) {
+ phy_info->phy_type = GENERIC_8023_C22_PHY;
+ phy_info->link_function =
+ __cvmx_get_generic_8023_c22_phy_link_state;
+ debug("Vitesse 802.3 c22 detected\n");
+ } else {
+ phy_info->phy_type = GENERIC_8023_C45_PHY;
+ phy_info->link_function =
+ __get_generic_8023_c45_phy_link_state;
+ debug("Vitesse 802.3 c45 detected\n");
+ }
+ } else if (!memcmp("aquantia", phy_compatible_str,
+ strlen("aquantia"))) {
+ phy_info->phy_type = AQUANTIA_PHY;
+ phy_info->link_function = __get_aquantia_phy_link_state;
+ debug("Aquantia c45 PHY detected\n");
+ } else if (!memcmp("cortina", phy_compatible_str, strlen("cortina"))) {
+ phy_info->phy_type = CORTINA_PHY;
+ phy_info->link_function = __cvmx_get_cortina_phy_link_state;
+ host_mode_str = (const char *)fdt_getprop(
+ fdt_addr, phy, "cortina,host-mode", NULL);
+ debug("Cortina PHY detected for ipd_port %d\n", ipd_port);
+ } else if (!memcmp("ti", phy_compatible_str, strlen("ti"))) {
+ phy_info->phy_type = GENERIC_8023_C45_PHY;
+ phy_info->link_function = __get_generic_8023_c45_phy_link_state;
+ debug("TI PHY detected for ipd_port %d\n", ipd_port);
+ } else if (!fdt_node_check_compatible(fdt_addr, phy,
+ "atheros,ar8334") ||
+ !fdt_node_check_compatible(fdt_addr, phy,
+ "qualcomm,qca8334") ||
+ !fdt_node_check_compatible(fdt_addr, phy,
+ "atheros,ar8337") ||
+ !fdt_node_check_compatible(fdt_addr, phy,
+ "qualcomm,qca8337")) {
+ phy_info->phy_type = QUALCOMM_S17;
+ phy_info->link_function =
+ __cvmx_get_qualcomm_s17_phy_link_state;
+ debug("Qualcomm QCA833X switch detected\n");
+ } else if (!fdt_node_check_compatible(fdt_addr, phy,
+ "ethernet-phy-ieee802.3-c22")) {
+ phy_info->phy_type = GENERIC_8023_C22_PHY;
+ phy_info->link_function =
+ __cvmx_get_generic_8023_c22_phy_link_state;
+ debug("Generic 802.3 c22 PHY detected\n");
+ } else if (!fdt_node_check_compatible(fdt_addr, phy,
+ "ethernet-phy-ieee802.3-c45")) {
+ phy_info->phy_type = GENERIC_8023_C45_PHY;
+ phy_info->link_function = __get_generic_8023_c45_phy_link_state;
+ debug("Generic 802.3 c45 PHY detected\n");
+ } else {
+ debug("Unknown PHY compatibility\n");
+ phy_info->phy_type = (cvmx_phy_type_t)-1;
+ phy_info->link_function = NULL;
+ }
+
+ phy_info->host_mode = CVMX_PHY_HOST_MODE_UNKNOWN;
+ if (host_mode_str) {
+ if (strcmp(host_mode_str, "rxaui") == 0)
+ phy_info->host_mode = CVMX_PHY_HOST_MODE_RXAUI;
+ else if (strcmp(host_mode_str, "xaui") == 0)
+ phy_info->host_mode = CVMX_PHY_HOST_MODE_XAUI;
+ else if (strcmp(host_mode_str, "sgmii") == 0)
+ phy_info->host_mode = CVMX_PHY_HOST_MODE_SGMII;
+ else if (strcmp(host_mode_str, "qsgmii") == 0)
+ phy_info->host_mode = CVMX_PHY_HOST_MODE_QSGMII;
+ else
+ debug("Unknown PHY host mode\n");
+ }
+
+ /* Check if PHY parent is the octeon MDIO bus. Some boards are connected
+ * though a MUX and for them direct_connect_to_phy will be 0
+ */
+ phy_parent = fdt_parent_offset(fdt_addr, phy);
+ if (phy_parent < 0) {
+ debug("ERROR : cannot find phy parent for ipd_port=%d ret=%d\n",
+ ipd_port, phy_parent);
+ return -1;
+ }
+ /* For multi-phy devices and devices on a MUX, go to the parent */
+ ret = fdt_node_check_compatible(fdt_addr, phy_parent,
+ "ethernet-phy-nexus");
+ if (ret == 0) {
+ /* It's a nexus so check the grandparent. */
+ phy_addr_offset =
+ cvmx_fdt_get_int(fdt_addr, phy_parent, "reg", 0);
+ phy_parent = fdt_parent_offset(fdt_addr, phy_parent);
+ }
+
+ /* Check for a muxed MDIO interface */
+ mdio_parent = fdt_parent_offset(fdt_addr, phy_parent);
+ ret = fdt_node_check_compatible(fdt_addr, mdio_parent,
+ "cavium,mdio-mux");
+ if (ret == 0) {
+ ret = __get_muxed_mdio_info_from_dt(phy_info, phy_parent,
+ mdio_parent);
+ if (ret) {
+ printf("Error reading mdio mux information for ipd port %d\n",
+ ipd_port);
+ return -1;
+ }
+ }
+ ret = fdt_node_check_compatible(fdt_addr, phy_parent,
+ "cavium,octeon-3860-mdio");
+ if (ret == 0) {
+ u32 *mdio_reg_base =
+ (u32 *)fdt_getprop(fdt_addr, phy_parent, "reg", 0);
+ phy_info->direct_connect = 1;
+ if (mdio_reg_base == 0) {
+ debug("ERROR : unable to get reg property in phy mdio\n");
+ return -1;
+ }
+ phy_info->mdio_unit =
+ __mdiobus_addr_to_unit(fdt32_to_cpu(mdio_reg_base[1]));
+ debug("phy parent=%s reg_base=%08x mdio_unit=%d\n",
+ fdt_get_name(fdt_addr, phy_parent, NULL),
+ (int)mdio_reg_base[1], phy_info->mdio_unit);
+ } else {
+ phy_info->direct_connect = 0;
+ /* The PHY is not directly connected to the Octeon MDIO bus.
+ * SE doesn't have abstractions for MDIO MUX or MDIO MUX
+ * drivers and hence for the non direct cases code will be
+ * needed which is board specific.
+ * For now the MDIO Unit is defaulted to 1.
+ */
+ debug("%s PHY at address: %d is not directly connected\n",
+ __func__, phy_info->phy_addr);
+ }
+
+ phy_info->phy_addr = cvmx_fdt_get_int(fdt_addr, phy, "reg", -1);
+ if (phy_info->phy_addr < 0) {
+ debug("ERROR: Could not read phy address from reg in DT\n");
+ return -1;
+ }
+ phy_info->phy_addr += phy_addr_offset;
+ phy_info->phy_addr |= phy_info->mdio_unit << 8;
+ debug("%s(%p, %d) => 0x%x\n", __func__, phy_info, ipd_port,
+ phy_info->phy_addr);
+ return phy_info->phy_addr;
+}
+
+/**
+ * @INTERNAL
+ * Parse the device tree and set whether a port is valid or not.
+ *
+ * @param fdt_addr Pointer to device tree
+ *
+ * @return 0 for success, -1 on error.
+ */
+int __cvmx_helper_parse_bgx_dt(const void *fdt_addr)
+{
+ int port_index;
+ struct cvmx_xiface xi;
+ int fdt_port_node = -1;
+ int fdt_interface_node;
+ int fdt_phy_node;
+ u64 reg_addr;
+ int xiface;
+ struct cvmx_phy_info *phy_info;
+ static bool parsed;
+ int err;
+ int ipd_port;
+
+ if (parsed) {
+ debug("%s: Already parsed\n", __func__);
+ return 0;
+ }
+ while ((fdt_port_node = fdt_node_offset_by_compatible(
+ fdt_addr, fdt_port_node,
+ "cavium,octeon-7890-bgx-port")) >= 0) {
+ /* Get the port number */
+ port_index =
+ cvmx_fdt_get_int(fdt_addr, fdt_port_node, "reg", -1);
+ if (port_index < 0) {
+ debug("Error: missing reg field for bgx port in device tree\n");
+ return -1;
+ }
+ debug("%s: Parsing BGX port %d\n", __func__, port_index);
+ /* Get the interface number */
+ fdt_interface_node = fdt_parent_offset(fdt_addr, fdt_port_node);
+ if (fdt_interface_node < 0) {
+ debug("Error: device tree corrupt!\n");
+ return -1;
+ }
+ if (fdt_node_check_compatible(fdt_addr, fdt_interface_node,
+ "cavium,octeon-7890-bgx")) {
+ debug("Error: incompatible Ethernet MAC Nexus in device tree!\n");
+ return -1;
+ }
+ reg_addr =
+ cvmx_fdt_get_addr(fdt_addr, fdt_interface_node, "reg");
+ debug("%s: BGX interface address: 0x%llx\n", __func__,
+ (unsigned long long)reg_addr);
+ if (reg_addr == FDT_ADDR_T_NONE) {
+ debug("Device tree BGX node has invalid address 0x%llx\n",
+ (unsigned long long)reg_addr);
+ return -1;
+ }
+ reg_addr = cvmx_fdt_translate_address(fdt_addr,
+ fdt_interface_node,
+ (u32 *)®_addr);
+ xi = __cvmx_bgx_reg_addr_to_xiface(reg_addr);
+ if (xi.node < 0) {
+ debug("Device tree BGX node has invalid address 0x%llx\n",
+ (unsigned long long)reg_addr);
+ return -1;
+ }
+ debug("%s: Found BGX node %d, interface %d\n", __func__,
+ xi.node, xi.interface);
+ xiface = cvmx_helper_node_interface_to_xiface(xi.node,
+ xi.interface);
+ cvmx_helper_set_port_fdt_node_offset(xiface, port_index,
+ fdt_port_node);
+ cvmx_helper_set_port_valid(xiface, port_index, true);
+
+ cvmx_helper_set_port_fdt_node_offset(xiface, port_index,
+ fdt_port_node);
+ if (fdt_getprop(fdt_addr, fdt_port_node,
+ "cavium,sgmii-mac-phy-mode", NULL))
+ cvmx_helper_set_mac_phy_mode(xiface, port_index, true);
+ else
+ cvmx_helper_set_mac_phy_mode(xiface, port_index, false);
+
+ if (fdt_getprop(fdt_addr, fdt_port_node, "cavium,force-link-up",
+ NULL))
+ cvmx_helper_set_port_force_link_up(xiface, port_index,
+ true);
+ else
+ cvmx_helper_set_port_force_link_up(xiface, port_index,
+ false);
+
+ if (fdt_getprop(fdt_addr, fdt_port_node,
+ "cavium,sgmii-mac-1000x-mode", NULL))
+ cvmx_helper_set_1000x_mode(xiface, port_index, true);
+ else
+ cvmx_helper_set_1000x_mode(xiface, port_index, false);
+
+ if (fdt_getprop(fdt_addr, fdt_port_node,
+ "cavium,disable-autonegotiation", NULL))
+ cvmx_helper_set_port_autonegotiation(xiface, port_index,
+ false);
+ else
+ cvmx_helper_set_port_autonegotiation(xiface, port_index,
+ true);
+
+ fdt_phy_node = cvmx_fdt_lookup_phandle(fdt_addr, fdt_port_node,
+ "phy-handle");
+ if (fdt_phy_node >= 0) {
+ cvmx_helper_set_phy_fdt_node_offset(xiface, port_index,
+ fdt_phy_node);
+ debug("%s: Setting PHY fdt node offset for interface 0x%x, port %d to %d\n",
+ __func__, xiface, port_index, fdt_phy_node);
+ debug("%s: PHY node name: %s\n", __func__,
+ fdt_get_name(fdt_addr, fdt_phy_node, NULL));
+ cvmx_helper_set_port_phy_present(xiface, port_index,
+ true);
+ ipd_port = cvmx_helper_get_ipd_port(xiface, port_index);
+ if (ipd_port >= 0) {
+ debug("%s: Allocating phy info for 0x%x:%d\n",
+ __func__, xiface, port_index);
+ phy_info =
+ (cvmx_phy_info_t *)cvmx_bootmem_alloc(
+ sizeof(*phy_info), 0);
+ if (!phy_info) {
+ debug("%s: Out of memory\n", __func__);
+ return -1;
+ }
+ memset(phy_info, 0, sizeof(*phy_info));
+ phy_info->phy_addr = -1;
+ err = __get_phy_info_from_dt(phy_info,
+ ipd_port);
+ if (err) {
+ debug("%s: Error parsing phy info for ipd port %d\n",
+ __func__, ipd_port);
+ return -1;
+ }
+ cvmx_helper_set_port_phy_info(
+ xiface, port_index, phy_info);
+ debug("%s: Saved phy info\n", __func__);
+ }
+ } else {
+ cvmx_helper_set_phy_fdt_node_offset(xiface, port_index,
+ -1);
+ debug("%s: No PHY fdt node offset for interface 0x%x, port %d to %d\n",
+ __func__, xiface, port_index, fdt_phy_node);
+ cvmx_helper_set_port_phy_present(xiface, port_index,
+ false);
+ }
+ }
+ if (!sfp_parsed)
+ if (cvmx_sfp_parse_device_tree(fdt_addr))
+ debug("%s: Error parsing SFP device tree\n", __func__);
+ parsed = true;
+ return 0;
+}
+
+int __cvmx_helper_parse_bgx_rgmii_dt(const void *fdt_addr)
+{
+ u64 reg_addr;
+ struct cvmx_xiface xi;
+ int fdt_port_node = -1;
+ int fdt_interface_node;
+ int fdt_phy_node;
+ int port_index;
+ int xiface;
+
+ /* There's only one xcv (RGMII) interface, so just search for the one
+ * that's part of a BGX entry.
+ */
+ while ((fdt_port_node = fdt_node_offset_by_compatible(
+ fdt_addr, fdt_port_node, "cavium,octeon-7360-xcv")) >=
+ 0) {
+ fdt_interface_node = fdt_parent_offset(fdt_addr, fdt_port_node);
+ if (fdt_interface_node < 0) {
+ printf("Error: device tree corrupt!\n");
+ return -1;
+ }
+ debug("%s: XCV parent node compatible: %s\n", __func__,
+ (char *)fdt_getprop(fdt_addr, fdt_interface_node,
+ "compatible", NULL));
+ if (!fdt_node_check_compatible(fdt_addr, fdt_interface_node,
+ "cavium,octeon-7890-bgx"))
+ break;
+ }
+ if (fdt_port_node == -FDT_ERR_NOTFOUND) {
+ debug("No XCV/RGMII interface found in device tree\n");
+ return 0;
+ } else if (fdt_port_node < 0) {
+ debug("%s: Error %d parsing device tree\n", __func__,
+ fdt_port_node);
+ return -1;
+ }
+ port_index = cvmx_fdt_get_int(fdt_addr, fdt_port_node, "reg", -1);
+ if (port_index != 0) {
+ printf("%s: Error: port index (reg) must be 0, not %d.\n",
+ __func__, port_index);
+ return -1;
+ }
+ reg_addr = cvmx_fdt_get_addr(fdt_addr, fdt_interface_node, "reg");
+ if (reg_addr == FDT_ADDR_T_NONE) {
+ printf("%s: Error: could not get BGX interface address\n",
+ __func__);
+ return -1;
+ }
+ /* We don't have to bother translating since only 78xx supports OCX and
+ * doesn't support RGMII.
+ */
+ xi = __cvmx_bgx_reg_addr_to_xiface(reg_addr);
+ debug("%s: xi.node: %d, xi.interface: 0x%x, addr: 0x%llx\n", __func__,
+ xi.node, xi.interface, (unsigned long long)reg_addr);
+ if (xi.node < 0) {
+ printf("%s: Device tree BGX node has invalid address 0x%llx\n",
+ __func__, (unsigned long long)reg_addr);
+ return -1;
+ }
+ debug("%s: Found XCV (RGMII) interface on interface %d\n", __func__,
+ xi.interface);
+ debug(" phy handle: 0x%x\n",
+ cvmx_fdt_get_int(fdt_addr, fdt_port_node, "phy-handle", -1));
+ fdt_phy_node =
+ cvmx_fdt_lookup_phandle(fdt_addr, fdt_port_node, "phy-handle");
+ debug("%s: phy-handle node: 0x%x\n", __func__, fdt_phy_node);
+ xiface = cvmx_helper_node_interface_to_xiface(xi.node, xi.interface);
+
+ cvmx_helper_set_port_fdt_node_offset(xiface, port_index, fdt_port_node);
+ if (fdt_phy_node >= 0) {
+ debug("%s: Setting PHY fdt node offset for interface 0x%x, port %d to %d\n",
+ __func__, xiface, port_index, fdt_phy_node);
+ debug("%s: PHY node name: %s\n", __func__,
+ fdt_get_name(fdt_addr, fdt_phy_node, NULL));
+ cvmx_helper_set_phy_fdt_node_offset(xiface, port_index,
+ fdt_phy_node);
+ cvmx_helper_set_port_phy_present(xiface, port_index, true);
+ } else {
+ cvmx_helper_set_phy_fdt_node_offset(xiface, port_index, -1);
+ debug("%s: No PHY fdt node offset for interface 0x%x, port %d to %d\n",
+ __func__, xiface, port_index, fdt_phy_node);
+ cvmx_helper_set_port_phy_present(xiface, port_index, false);
+ }
+
+ return 0;
+}
+
+/**
+ * Returns if a port is present on an interface
+ *
+ * @param fdt_addr - address fo flat device tree
+ * @param ipd_port - IPD port number
+ *
+ * @return 1 if port is present, 0 if not present, -1 if error
+ */
+int __cvmx_helper_board_get_port_from_dt(void *fdt_addr, int ipd_port)
+{
+ int port_index;
+ int aliases;
+ const char *pip_path;
+ char name_buffer[24];
+ int pip, iface, eth;
+ cvmx_helper_interface_mode_t mode;
+ int xiface = cvmx_helper_get_interface_num(ipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ u32 val;
+ int phy_node_offset;
+ int parse_bgx_dt_err;
+ int parse_vsc7224_err;
+
+ debug("%s(%p, %d)\n", __func__, fdt_addr, ipd_port);
+ if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
+ static int fdt_ports_initialized;
+
+ port_index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ if (!fdt_ports_initialized) {
+ if (octeon_has_feature(OCTEON_FEATURE_BGX_XCV)) {
+ if (!__cvmx_helper_parse_bgx_rgmii_dt(fdt_addr))
+ fdt_ports_initialized = 1;
+ parse_bgx_dt_err =
+ __cvmx_helper_parse_bgx_dt(fdt_addr);
+ parse_vsc7224_err =
+ __cvmx_fdt_parse_vsc7224(fdt_addr);
+ if (!parse_bgx_dt_err && !parse_vsc7224_err)
+ fdt_ports_initialized = 1;
+ } else {
+ debug("%s: Error parsing FDT\n", __func__);
+ return -1;
+ }
+ }
+
+ return cvmx_helper_is_port_valid(xiface, port_index);
+ }
+
+ mode = cvmx_helper_interface_get_mode(xiface);
+
+ switch (mode) {
+ /* Device tree has information about the following mode types. */
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
+ case CVMX_HELPER_INTERFACE_MODE_GMII:
+ case CVMX_HELPER_INTERFACE_MODE_SPI:
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_QSGMII:
+ case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+ case CVMX_HELPER_INTERFACE_MODE_AGL:
+ case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XFI:
+ aliases = 1;
+ break;
+ default:
+ aliases = 0;
+ break;
+ }
+
+ /* The device tree information is present on interfaces that have phy */
+ if (!aliases)
+ return 1;
+
+ port_index = cvmx_helper_get_interface_index_num(ipd_port);
+
+ aliases = fdt_path_offset(fdt_addr, "/aliases");
+ if (aliases < 0) {
+ debug("%s: ERROR: /aliases not found in device tree fdt_addr=%p\n",
+ __func__, fdt_addr);
+ return -1;
+ }
+
+ pip_path = (const char *)fdt_getprop(fdt_addr, aliases, "pip", NULL);
+ if (!pip_path) {
+ debug("%s: ERROR: interface %x pip path not found in device tree\n",
+ __func__, xiface);
+ return -1;
+ }
+ pip = fdt_path_offset(fdt_addr, pip_path);
+ if (pip < 0) {
+ debug("%s: ERROR: interface %x pip not found in device tree\n",
+ __func__, xiface);
+ return -1;
+ }
+ snprintf(name_buffer, sizeof(name_buffer), "interface@%d",
+ xi.interface);
+ iface = fdt_subnode_offset(fdt_addr, pip, name_buffer);
+ if (iface < 0)
+ return 0;
+ snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", port_index);
+ eth = fdt_subnode_offset(fdt_addr, iface, name_buffer);
+ debug("%s: eth subnode offset %d from %s\n", __func__, eth,
+ name_buffer);
+
+ if (eth < 0)
+ return -1;
+
+ cvmx_helper_set_port_fdt_node_offset(xiface, port_index, eth);
+
+ phy_node_offset = cvmx_fdt_get_int(fdt_addr, eth, "phy", -1);
+ cvmx_helper_set_phy_fdt_node_offset(xiface, port_index,
+ phy_node_offset);
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,sgmii-mac-phy-mode", NULL))
+ cvmx_helper_set_mac_phy_mode(xiface, port_index, true);
+ else
+ cvmx_helper_set_mac_phy_mode(xiface, port_index, false);
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,force-link-up", NULL))
+ cvmx_helper_set_port_force_link_up(xiface, port_index, true);
+ else
+ cvmx_helper_set_port_force_link_up(xiface, port_index, false);
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,sgmii-mac-1000x-mode", NULL))
+ cvmx_helper_set_1000x_mode(xiface, port_index, true);
+ else
+ cvmx_helper_set_1000x_mode(xiface, port_index, false);
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,disable-autonegotiation", NULL))
+ cvmx_helper_set_port_autonegotiation(xiface, port_index, false);
+ else
+ cvmx_helper_set_port_autonegotiation(xiface, port_index, true);
+
+ if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
+ bool tx_bypass = false;
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,rx-clk-delay-bypass",
+ NULL))
+ cvmx_helper_set_agl_rx_clock_delay_bypass(
+ xiface, port_index, true);
+ else
+ cvmx_helper_set_agl_rx_clock_delay_bypass(
+ xiface, port_index, false);
+
+ val = cvmx_fdt_get_int(fdt_addr, eth, "cavium,rx-clk-skew", 0);
+ cvmx_helper_set_agl_rx_clock_skew(xiface, port_index, val);
+
+ if (fdt_getprop(fdt_addr, eth, "cavium,tx-clk-delay-bypass",
+ NULL))
+ tx_bypass = true;
+
+ val = cvmx_fdt_get_int(fdt_addr, eth, "tx-clk-delay", 0);
+ cvmx_helper_cfg_set_rgmii_tx_clk_delay(xiface, port_index,
+ tx_bypass, val);
+
+ val = cvmx_fdt_get_int(fdt_addr, eth, "cavium,refclk-sel", 0);
+ cvmx_helper_set_agl_refclk_sel(xiface, port_index, val);
+ }
+
+ return (eth >= 0);
+}
+
+/**
+ * Given the address of the MDIO registers, output the CPU node and MDIO bus
+ *
+ * @param addr 64-bit address of MDIO registers (from device tree)
+ * @param[out] node CPU node number (78xx)
+ * @param[out] bus MDIO bus number
+ */
+void __cvmx_mdio_addr_to_node_bus(u64 addr, int *node, int *bus)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+ if (node)
+ *node = cvmx_csr_addr_to_node(addr);
+ addr = cvmx_csr_addr_strip_node(addr);
+ } else {
+ if (node)
+ *node = 0;
+ }
+ if (OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CN78XX)) {
+ switch (addr) {
+ case 0x0001180000003800:
+ *bus = 0;
+ break;
+ case 0x0001180000003880:
+ *bus = 1;
+ break;
+ case 0x0001180000003900:
+ *bus = 2;
+ break;
+ case 0x0001180000003980:
+ *bus = 3;
+ break;
+ default:
+ *bus = -1;
+ printf("%s: Invalid SMI bus address 0x%llx\n", __func__,
+ (unsigned long long)addr);
+ break;
+ }
+ } else if (OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+ OCTEON_IS_MODEL(OCTEON_CNF75XX)) {
+ switch (addr) {
+ case 0x0001180000003800:
+ *bus = 0;
+ break;
+ case 0x0001180000003880:
+ *bus = 1;
+ break;
+ default:
+ *bus = -1;
+ printf("%s: Invalid SMI bus address 0x%llx\n", __func__,
+ (unsigned long long)addr);
+ break;
+ }
+ } else {
+ switch (addr) {
+ case 0x0001180000001800:
+ *bus = 0;
+ break;
+ case 0x0001180000001900:
+ *bus = 1;
+ break;
+ default:
+ *bus = -1;
+ printf("%s: Invalid SMI bus address 0x%llx\n", __func__,
+ (unsigned long long)addr);
+ break;
+ }
+ }
+}
projects / u-boot.git / commitdiff
