return 0;
}
+/*
+ * Return the address of the command within a descriptor.
+ */
+static unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
+{
+ return desc->address + offsetof(struct mxs_dma_desc, cmd);
+}
+
+/*
+ * Read a DMA channel's hardware semaphore.
+ *
+ * As used by the MXS platform's DMA software, the DMA channel's hardware
+ * semaphore reflects the number of DMA commands the hardware will process, but
+ * has not yet finished. This is a volatile value read directly from hardware,
+ * so it must be be viewed as immediately stale.
+ *
+ * If the channel is not marked busy, or has finished processing all its
+ * commands, this value should be zero.
+ *
+ * See mxs_dma_append() for details on how DMA command blocks must be configured
+ * to maintain the expected behavior of the semaphore's value.
+ */
+static int mxs_dma_read_semaphore(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
+
+ tmp &= APBH_CHn_SEMA_PHORE_MASK;
+ tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
+
+ return tmp;
+}
+
/*
* Enable a DMA channel.
*
* This function marks the DMA channel as "busy," whether or not there are any
* descriptors to process.
*/
-int mxs_dma_enable(int channel)
+static int mxs_dma_enable(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
* state. It is unwise to call this function if there is ANY chance the hardware
* is still processing a command.
*/
-int mxs_dma_disable(int channel)
+static int mxs_dma_disable(int channel)
{
struct mxs_dma_chan *pchan;
struct mx28_apbh_regs *apbh_regs =
/*
* Resets the DMA channel hardware.
*/
-int mxs_dma_reset(int channel)
+static int mxs_dma_reset(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
return 0;
}
-/*
- * Freeze a DMA channel.
- *
- * This function causes the channel to continuously fail arbitration for bus
- * access, which halts all forward progress without losing any state. A call to
- * mxs_dma_unfreeze() will cause the channel to continue its current operation
- * with no ill effect.
- */
-int mxs_dma_freeze(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
- &apbh_regs->hw_apbh_channel_ctrl_set);
-
- return 0;
-}
-
-/*
- * Unfreeze a DMA channel.
- *
- * This function reverses the effect of mxs_dma_freeze(), enabling the DMA
- * channel to continue from where it was frozen.
- */
-int mxs_dma_unfreeze(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
- &apbh_regs->hw_apbh_channel_ctrl_clr);
-
- return 0;
-}
-
-/*
- * Read a DMA channel's hardware semaphore.
- *
- * As used by the MXS platform's DMA software, the DMA channel's hardware
- * semaphore reflects the number of DMA commands the hardware will process, but
- * has not yet finished. This is a volatile value read directly from hardware,
- * so it must be be viewed as immediately stale.
- *
- * If the channel is not marked busy, or has finished processing all its
- * commands, this value should be zero.
- *
- * See mxs_dma_append() for details on how DMA command blocks must be configured
- * to maintain the expected behavior of the semaphore's value.
- */
-int mxs_dma_read_semaphore(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- uint32_t tmp;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
-
- tmp &= APBH_CHn_SEMA_PHORE_MASK;
- tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
-
- return tmp;
-}
-
/*
* Enable or disable DMA interrupt.
*
* This function enables the given DMA channel to interrupt the CPU.
*/
-int mxs_dma_enable_irq(int channel, int enable)
+static int mxs_dma_enable_irq(int channel, int enable)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
return 0;
}
-/*
- * Check if a DMA interrupt is pending.
- */
-int mxs_dma_irq_is_pending(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- uint32_t tmp;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- tmp = readl(&apbh_regs->hw_apbh_ctrl1);
- tmp |= readl(&apbh_regs->hw_apbh_ctrl2);
-
- return (tmp >> channel) & 1;
-}
-
/*
* Clear DMA interrupt.
*
* The software that is using the DMA channel must register to receive its
* interrupts and, when they arrive, must call this function to clear them.
*/
-int mxs_dma_ack_irq(int channel)
+static int mxs_dma_ack_irq(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
/*
* Request to reserve a DMA channel
*/
-int mxs_dma_request(int channel)
+static int mxs_dma_request(int channel)
{
struct mxs_dma_chan *pchan;
* The channel will NOT be released if it's marked "busy" (see
* mxs_dma_enable()).
*/
-int mxs_dma_release(int channel)
+static int mxs_dma_release(int channel)
{
struct mxs_dma_chan *pchan;
int ret;
free(pdesc);
}
-/*
- * Return the address of the command within a descriptor.
- */
-unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
-{
- return desc->address + offsetof(struct mxs_dma_desc, cmd);
-}
-
-/*
- * Check if descriptor is on a channel's active list.
- *
- * This function returns the state of a descriptor's "ready" flag. This flag is
- * usually set only if the descriptor appears on a channel's active list. The
- * descriptor may or may not have already been processed by the hardware.
- *
- * The "ready" flag is set when the descriptor is submitted to a channel by a
- * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is
- * cleared when a processed descriptor is moved off the active list by a call
- * to mxs_dma_finish(). The "ready" flag is NOT cleared if the descriptor is
- * aborted by a call to mxs_dma_disable().
- */
-int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc)
-{
- return pdesc->flags & MXS_DMA_DESC_READY;
-}
-
/*
* Add a DMA descriptor to a channel.
*
return ret;
}
-/*
- * Retrieve processed DMA descriptors.
- *
- * This function moves all the descriptors from the DMA channel's "done" list to
- * the head of the given list.
- */
-int mxs_dma_get_finished(int channel, struct list_head *head)
-{
- struct mxs_dma_chan *pchan;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- if (head == NULL)
- return 0;
-
- pchan = mxs_dma_channels + channel;
-
- list_splice(&pchan->done, head);
-
- return 0;
-}
-
/*
* Clean up processed DMA descriptors.
*
* This function marks the DMA channel as "not busy" if no unprocessed
* descriptors remain on the "active" list.
*/
-int mxs_dma_finish(int channel, struct list_head *head)
+static int mxs_dma_finish(int channel, struct list_head *head)
{
int sem;
struct mxs_dma_chan *pchan;
/*
* Wait for DMA channel to complete
*/
-int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
+static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
projects / u-boot.git / commitdiff
