mx6sabreauto: Convert to DM_ETH

This fixes the following warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c
index 140f24459d75fb2dee3f8bb43ee987a361c0c550..de19a562eb40c84592ec4ebb1d76adf59031749a 100644 (file)
--- a/board/freescale/mx6sabreauto/mx6sabreauto.c
+++ b/board/freescale/mx6sabreauto/mx6sabreauto.c
@@ -22,7 +22,6 @@
 #include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <miiphy.h>
-#include <netdev.h>
 #include <asm/arch/sys_proto.h>
 #include <i2c.h>
 #include <input.h>
@@ -76,23 +75,6 @@ static iomux_v3_cfg_t const uart4_pads[] = {
        IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
-static iomux_v3_cfg_t const enet_pads[] = {
-       IOMUX_PADS(PAD_KEY_COL1__ENET_MDIO              | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_KEY_COL2__ENET_MDC               | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK        | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3             | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-};
 
 /* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
 static struct i2c_pads_info mx6q_i2c_pad_info1 = {
@@ -259,10 +241,6 @@ static void setup_iomux_eimnor(void)
 }
 #endif
 
-static void setup_iomux_enet(void)
-{
-       SETUP_IOMUX_PADS(enet_pads);
-}
 
 static iomux_v3_cfg_t const usdhc3_pads[] = {
        IOMUX_PADS(PAD_SD3_CLK__SD3_CLK         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -340,26 +318,6 @@ static void setup_gpmi_nand(void)
 }
 #endif
 
-static void setup_fec(void)
-{
-       if (is_mx6dqp()) {
-               /*
-                * select ENET MAC0 TX clock from PLL
-                */
-               imx_iomux_set_gpr_register(5, 9, 1, 1);
-               enable_fec_anatop_clock(0, ENET_125MHZ);
-       }
-
-       setup_iomux_enet();
-}
-
-int board_eth_init(bd_t *bis)
-{
-       setup_fec();
-
-       return cpu_eth_init(bis);
-}
-
 u32 get_board_rev(void)
 {
        int rev = nxp_board_rev();

diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index 723e1c32d828a707514a517172af43eb6ec6f9a8..06835f203abffcfe9b7922ddcc21d4b7908c796f 100644 (file)
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -97,3 +97,8 @@ CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_BPP32 is not set
 CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
+CONFIG_FEC_MXC=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_RGMII=y

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index c07b03984aa2bc59304e81a6cade6577d4b39913..e444930dc87baa2a3d05aabcfd8aa6334a2b1b55 100644 (file)
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -75,12 +75,4 @@
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE            RGMII
-#define CONFIG_ETHPRIME                        "FEC"
-#define CONFIG_FEC_MXC_PHYADDR         1
-
-#define CONFIG_PHY_ATHEROS
-
 #endif                         /* __MX6SABREAUTO_CONFIG_H */