ARM: kirkwood: Add device-tree for pogo_e02

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/dts/kirkwood-pogo_e02.dts b/arch/arm/dts/kirkwood-pogo_e02.dts
new file mode 100644 (file)
index 0000000..f9e95e5
--- /dev/null
+++ b/arch/arm/dts/kirkwood-pogo_e02.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Cloud Engines Pogoplug E02";
+       compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+                    "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x10000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+               stdout-path = &uart0;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               health {
+                       label = "pogo_e02:green:health";
+                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               fault {
+                       label = "pogo_e02:orange:fault";
+                       gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_usb_power_enable>;
+               pinctrl-names = "default";
+
+               usb_power: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "USB Power";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+                     &pmx_led_green >;
+       pinctrl-names = "default";
+
+       pmx_usb_power_enable: pmx-usb-power-enable {
+               marvell,pins = "mpp29";
+               marvell,function = "gpio";
+       };
+
+       pmx_led_green: pmx-led-green {
+               marvell,pins = "mpp48";
+               marvell,function = "gpio";
+       };
+
+       pmx_led_orange: pmx-led-orange {
+               marvell,pins = "mpp49";
+               marvell,function = "gpio";
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&nand {
+       chip-delay = <40>;
+       status = "okay";
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0000000 0x100000>;
+               read-only;
+       };
+
+       partition@100000 {
+               label = "uImage";
+               reg = <0x0100000 0x400000>;
+       };
+
+       partition@500000 {
+               label = "pogoplug";
+               reg = <0x0500000 0x2000000>;
+       };
+
+       partition@2500000 {
+               label = "root";
+               reg = <0x02500000 0x5b00000>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};

diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig
index 6d1af7748d575dd63030f6634f28f6fc1300d3cc..0c4c023406eaee7d1b9cad4029fb93fb446c3cdf 100644 (file)
--- a/configs/pogo_e02_defconfig
+++ b/configs/pogo_e02_defconfig
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_POGO_E02=y
 CONFIG_IDENT_STRING="\nPogo E02"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="PogoE02> "
@@ -18,6 +19,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_JFFS2=y
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 # CONFIG_MMC is not set
 CONFIG_NETDEVICES=y
@@ -26,4 +28,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y