EFI (or vice versa). Also it will often fail to print an error message if
you get this wrong.
+You may find the script `scripts/build-efi.sh` helpful for building and testing
+U-Boot on UEFI on QEMU. It also includes links to UEFI binaries dating from
+2021.
+
+See `Example run`_ for an example run.
Inner workings
--------------
Everything else is built as a normal U-Boot, so is always 32-bit on x86 at
present.
+Example run
+-----------
+
+This shows running with serial enabled (see `include/configs/efi-x86_app.h`)::
+
+ $ scripts/build-efi.sh -wsPr
+ Packaging efi-x86_app32
+ Running qemu-system-i386
+
+ BdsDxe: failed to load Boot0001 "UEFI QEMU HARDDISK QM00005 " from PciRoot(0x0)/Pci(0x3,0x0)/Sata(0x0,0xFFFF,0x0): Not Found
+ BdsDxe: loading Boot0002 "EFI Internal Shell" from Fv(7CB8BDC9-F8EB-4F34-AAEA-3EE4AF6516A1)/FvFile(7C04A583-9E3E-4F1C-AD65-E05268D0B4D1)
+ BdsDxe: starting Boot0002 "EFI Internal Shell" from Fv(7CB8BDC9-F8EB-4F34-AAEA-3EE4AF6516A1)/FvFile(7C04A583-9E3E-4F1C-AD65-E05268D0B4D1)
+
+ UEFI Interactive Shell v2.2
+ EDK II
+ UEFI v2.70 (EDK II, 0x00010000)
+ Mapping table
+ FS0: Alias(s):HD0a65535a1:;BLK1:
+ PciRoot(0x0)/Pci(0x3,0x0)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,0FFD5E61-3B0C-4326-8049-BDCDC910AF72,0x800,0xB000)
+ BLK0: Alias(s):
+ PciRoot(0x0)/Pci(0x3,0x0)/Sata(0x0,0xFFFF,0x0)
+
+ Press ESC in 5 seconds to skip startup.nsh or any other key to continue.
+ Shell> fs0:u-boot-app.efi
+ U-Boot EFI App (using allocated RAM address 47d4000) key=8d4, image=06a6f610
+ starting
+
+
+ U-Boot 2022.01-rc4 (Sep 19 2021 - 14:03:20 -0600)
+
+ CPU: x86, vendor Intel, device 663h
+ DRAM: 32 MiB
+ 0: efi_media_0 PciRoot(0x0)/Pci(0x3,0x0)/Sata(0x0,0xFFFF,0x0)
+ 1: <partition> PciRoot(0x0)/Pci(0x3,0x0)/Sata(0x0,0xFFFF,0x0)/HD(1,GPT,0FFD5E61-3B0C-4326-8049-BDCDC910AF72,0x800,0xB000)
+ Loading Environment from nowhere... OK
+ Model: EFI x86 Application
+ Hit any key to stop autoboot: 0
+
+ Partition Map for EFI device 0 -- Partition Type: EFI
+
+ Part Start LBA End LBA Name
+ Attributes
+ Type GUID
+ Partition GUID
+ 1 0x00000800 0x0000b7ff "boot"
+ attrs: 0x0000000000000000
+ type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
+ guid: 0ffd5e61-3b0c-4326-8049-bdcdc910af72
+ 19 startup.nsh
+ 528384 u-boot-app.efi
+ 10181 NvVars
+
+ 3 file(s), 0 dir(s)
+
+ => QEMU: Terminated
+
+
Future work
-----------
This work could be extended in a number of ways:
--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Script to build an EFI thing suitable for booting with QEMU, possibly running
+# it also.
+
+# This just an example. It assumes that
+
+# - you build U-Boot in ${ubdir}/<name> where <name> is the U-Boot board config
+# - /mnt/x is a directory used for mounting
+# - you have access to the 'pure UEFI' builds for QEMU
+#
+# UEFI binaries for QEMU used for testing this script:
+#
+# OVMF-pure-efi.i386.fd at
+# https://drive.google.com/file/d/1jWzOAZfQqMmS2_dAK2G518GhIgj9r2RY/view?usp=sharing
+
+# OVMF-pure-efi.x64.fd at
+# https://drive.google.com/file/d/1c39YI9QtpByGQ4V0UNNQtGqttEzS-eFV/view?usp=sharing
+
+set -e
+
+usage() {
+ echo "Usage: $0 [-a | -p] [other opts]" 1>&2
+ echo 1>&2
+ echo " -a - Package up the app" 1>&2
+ echo " -o - Use old EFI app build (before 32/64 split)" 1>&2
+ echo " -p - Package up the payload" 1>&2
+ echo " -P - Create a partition table" 1>&2
+ echo " -r - Run QEMU with the image" 1>&2
+ echo " -s - Run QEMU with serial only (no display)" 1>&2
+ echo " -w - Use word version (32-bit)" 1>&2
+ exit 1
+}
+
+# 32- or 64-bit EFI
+bitness=64
+
+# app or payload ?
+type=app
+
+# create a partition table and put the filesystem in that (otherwise put the
+# filesystem in the raw device)
+part=
+
+# run the image with QEMU
+run=
+
+# run QEMU without a display (U-Boot must be set to stdout=serial)
+serial=
+
+# before the 32/64 split of the app
+old=
+
+# Set ubdir to the build directory where you build U-Boot out-of-tree
+# We avoid in-tree build because it gets confusing trying different builds
+ubdir=/tmp/b/
+
+while getopts "aopPrsw" opt; do
+ case "${opt}" in
+ a)
+ type=app
+ ;;
+ p)
+ type=payload
+ ;;
+ r)
+ run=1
+ ;;
+ s)
+ serial=1
+ ;;
+ w)
+ bitness=32
+ ;;
+ o)
+ old=1
+ ;;
+ P)
+ part=1
+ ;;
+ *)
+ usage
+ ;;
+ esac
+done
+
+run_qemu() {
+ extra=
+ if [[ "${bitness}" = "64" ]]; then
+ qemu=qemu-system-x86_64
+ bios=OVMF-pure-efi.x64.fd
+ else
+ qemu=qemu-system-i386
+ bios=OVMF-pure-efi.i386.fd
+ fi
+ if [[ -n "${serial}" ]]; then
+ extra="-display none -serial mon:stdio"
+ fi
+ echo "Running ${qemu}"
+ # Use 512MB since U-Boot EFI likes to have 256MB to play with
+ "${qemu}" -bios "${bios}" \
+ -m 512 \
+ -drive id=disk,file="${IMG}",if=none,format=raw \
+ -nic none -device ahci,id=ahci \
+ -device ide-hd,drive=disk,bus=ahci.0 ${extra}
+}
+
+setup_files() {
+ echo "Packaging ${BUILD}"
+ mkdir -p $TMP
+ cat >$TMP/startup.nsh <<EOF
+fs0:u-boot-${type}.efi
+EOF
+ sudo cp ${ubdir}/${BUILD}/u-boot-${type}.efi $TMP
+
+ # Can copy in other files here:
+ #sudo cp ${ubdir}/$BUILD/image.bin $TMP/chromeos.rom
+ #sudo cp /boot/vmlinuz-5.4.0-77-generic $TMP/vmlinuz
+}
+
+# Copy files into the filesystem
+copy_files() {
+ sudo cp $TMP/* $MNT
+}
+
+# Create a filesystem on a raw device and copy in the files
+setup_raw() {
+ mkfs.vfat "${IMG}" >/dev/null
+ sudo mount -o loop "${IMG}" $MNT
+ copy_files
+ sudo umount $MNT
+}
+
+# Create a partition table and put the filesystem in the first partition
+# then copy in the files
+setup_part() {
+ # Create a gpt partition table with one partition
+ parted "${IMG}" mklabel gpt 2>/dev/null
+
+ # This doesn't work correctly. It creates:
+ # Number Start End Size File system Name Flags
+ # 1 1049kB 24.1MB 23.1MB boot msftdata
+ # Odd if the same is entered interactively it does set the FS type
+ parted -s -a optimal -- "${IMG}" mkpart boot fat32 1MiB 23MiB
+
+ # Map this partition to a loop device
+ kp="$(sudo kpartx -av ${IMG})"
+ read boot_dev<<<$(grep -o 'loop.*p.' <<< "${kp}")
+ test "${boot_dev}"
+ dev="/dev/mapper/${boot_dev}"
+
+ mkfs.vfat "${dev}" >/dev/null
+
+ sudo mount -o loop "${dev}" $MNT
+
+ copy_files
+
+ # Sync here since this makes kpartx more likely to work the first time
+ sync
+ sudo umount $MNT
+
+ # For some reason this needs a sleep or it sometimes fails, if it was
+ # run recently (in the last few seconds)
+ if ! sudo kpartx -d "${IMG}" > /dev/null; then
+ sleep .5
+ sudo kpartx -d "${IMG}" > /dev/null || \
+ echo "Failed to remove ${boot_dev}, use: sudo kpartx -d ${IMG}"
+ fi
+}
+
+TMP="/tmp/efi${bitness}${type}"
+MNT=/mnt/x
+BUILD="efi-x86_${type}${bitness}"
+IMG=try.img
+
+if [[ -n "${old}" && "${bitness}" = "32" ]]; then
+ BUILD="efi-x86_${type}"
+fi
+
+setup_files
+
+qemu-img create "${IMG}" 24M >/dev/null
+
+if [[ -n "${part}" ]]; then
+ setup_part
+else
+ setup_raw
+fi
+
+if [[ -n "${run}" ]]; then
+ run_qemu
+fi
projects / u-boot.git / commitdiff
