arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports

The commit in the Fixes: tag below broke traffic through switch ports
where the SERDES protocol requires in-band autoneg and this requirement
isn't described in the device tree: SGMII, QSGMII, USXGMII (with
2500Base-X, in-band autoneg isn't supported).

The LS1028A-QDS boards are not yet ready for syncing their device trees
with Linux, since Ethernet is missing there (but has been submitted):
https://lore.kernel.org/lkml/20211112223457.10599-11-leoyang.li@nxp.com/

When agreement is reached for the Ethernet support in Linux, there will
be a sync for these boards as well. For now, just enable in-band autoneg
to fix the breakage.

Fixes: e3789a726269 ("net: dsa: felix: configure the in-band autoneg property based on OF node info")
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
index f4c557e69e6ef7c47a84dda2c93d0e706b530bfe..f208a02721e39868957be7c976a100f58dd5fcee 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
@@ -15,6 +15,7 @@
 
 &enetc_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "usxgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
 };

diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
index 7d197c31814aa78a4fe5935793df5ec3c819b3d5..0a0926473541c95c712536f1b32a2276738495ba 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
@@ -14,6 +14,7 @@
 
 &enetc_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
 };

diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index 992092ec78381fd194c81e89bbe2d4a1d82169e9..94b5e765aedbcd83ae7c270e4323645bc7254958 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -44,24 +44,28 @@
 
 &mscc_felix_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
 };
 
 &mscc_felix_port1 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>;
 };
 
 &mscc_felix_port2 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
 };
 
 &mscc_felix_port3 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };

diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index a905d77a9a712fd170ccb11021267373f687c809..bd46adfd2928a249e9cebbca70f7b630203f32af 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -29,24 +29,28 @@
 
 &mscc_felix_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
 };
 
 &mscc_felix_port1 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>;
 };
 
 &mscc_felix_port2 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
 };
 
 &mscc_felix_port3 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "sgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };

diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 62e818f099cab7c90d8095c667bc79da5e9d0baf..5909e7635a1aa800e0a48d612609e945740a9ac6 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -29,24 +29,28 @@
 
 &mscc_felix_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "usxgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
 };
 
 &mscc_felix_port1 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "usxgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
 };
 
 &mscc_felix_port2 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "usxgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
 };
 
 &mscc_felix_port3 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "usxgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
 };

diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
index 6f1f6cb32af733300b51a5a36666b242fb305973..b652206920798c0c852046c5bc73105be799078f 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -23,24 +23,28 @@
 
 &mscc_felix_port0 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "qsgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>;
 };
 
 &mscc_felix_port1 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "qsgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>;
 };
 
 &mscc_felix_port2 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "qsgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>;
 };
 
 &mscc_felix_port3 {
        status = "okay";
+       managed = "in-band-status";
        phy-mode = "qsgmii";
        phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
 };