--- /dev/null
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: NAND, 0xE (SW3)
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+ model = "Marvell Armada 7040 DB board with NAND";
+ compatible = "marvell,armada7040-db-nand", "marvell,armada7040-db",
+ "marvell,armada7040", "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ spi0 = &cpm_spi1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&ap_pinctl {
+ /* MPP Bus:
+ * SDIO [0-5]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x1 0x1 0x1 0x1 0x1 0x1 0x0 0x0 0x0 0x0
+ 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3 >;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+
+&cpm_pcie2 {
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_pinctl {
+ /* MPP Bus:
+ * AUDIO [0-5]
+ * GBE [6-11]
+ * SS_PWDN [12]
+ * NF_RBn [13]
+ * GPIO [14]
+ * DEV_BUS [15-27]
+ * SATA1 [28]
+ * UART0 [29-30]
+ * MSS_VTT_EN [31]
+ * SMI [32,34]
+ * XSMI [35-36]
+ * I2C [37-38]
+ * RGMII1 [44-55]
+ * SD [56-61]
+ * GPIO [62]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x2 0x2 0x2 0x2 0x2 0x2 0x3 0x3 0x3 0x3
+ 0x3 0x3 0x0 0x2 0x0 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x9 0xa
+ 0xa 0x0 0x7 0x0 0x7 0x7 0x7 0x2 0x2 0x0
+ 0x0 0x0 0x0 0x0 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0x0>;
+};
+
+&cpm_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_spi0_pins>;
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_usb3_0 {
+ status = "okay";
+};
+
+&cpm_usb3_1 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ phy0 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_3_125G>;
+ };
+
+ phy1 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy2 {
+ phy-type = <PHY_TYPE_SGMII0>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+};
+
+&cpm_nand {
+ status = "okay";
+};
+
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
projects / u-boot.git / commitdiff
