colibri_imx6: fix RALAT and WALAT values

Running a memtest in U-Boot and Linux shows that some Colibri iMX6
produce bitflips at temperatures above 60°C. This happens because the
RALAT and WALAT values on the Colibri iMX6 are too low. The problems
were introduced by commit 09dbac8174c4 ("mx6: ddr: Restore ralat/walat
in write level calibration") before the calibration process overwrote
the values and set them to the maximum value. With this commit, we make
sure that the RALAT and WALAT values are set to the maximum values
again. This has been proven to work for years.

Fixes: 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 65e0e9a156abddadf70f88bbc42f829b1eb15f95..677caa4a4ebcb3c80085f924e765989d3116493e 100644 (file)
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -767,8 +767,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
 /*
  * MDMISC      mirroring       interleaved (row/bank/col)
  */
-/* TODO: check what the RALAT field does */
-MX6_MMDC_P0_MDMISC, 0x00081740,
+MX6_MMDC_P0_MDMISC, 0x000b17c0,
 
 /*
  * MDSCR       con_req
@@ -900,8 +899,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
 /*
  * MDMISC      mirroring       interleaved (row/bank/col)
  */
-/* TODO: check what the RALAT field does */
-MX6_MMDC_P0_MDMISC, 0x00081740,
+MX6_MMDC_P0_MDMISC, 0x000b17c0,
 
 /*
  * MDSCR       con_req