video: remove unused include/mb862xx.h

CONFIG_VIDEO_MB862xx cannot be selected by any configuration.
So we can eliminate include/mb862xx.h.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 0c9262d35400832807d02b1a4bb2c21c0bdcf363..3444af6a8c7f1e10553acb609e7f682445554219 100644 (file)
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -26,14 +26,12 @@
 #include <fdt_support.h>
 #include <asm/io.h>
 #include <i2c.h>
-#include <mb862xx.h>
 #include <video_fb.h>
 #include "upm_table.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[];      /* FLASH chips info */
-extern GraphicDevice mb862xx;
 
 void local_bus_init (void);
 ulong flash_get_size (ulong base, int banknum);
@@ -207,16 +205,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
        val[i++] = gd->bd->bi_flashstart;
        val[i++] = gd->bd->bi_flashsize;
 
-#if defined(CONFIG_VIDEO_MB862xx)
-       if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
-               /* Fixup LIME mapping */
-               val[i++] = 2;                   /* chip select number */
-               val[i++] = 0;                   /* always 0 */
-               val[i++] = CONFIG_SYS_LIME_BASE;
-               val[i++] = CONFIG_SYS_LIME_SIZE;
-       }
-#endif
-
        /* Fixup FPGA mapping */
        val[i++] = 3;                           /* chip select number */
        val[i++] = 0;                           /* always 0 */

diff --git a/include/mb862xx.h b/include/mb862xx.h
deleted file mode 100644 (file)
index 54c8c75..0000000
--- a/include/mb862xx.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2007
- * DENX Software Engineering, Anatolij Gustschin, agust@denx.de
- */
-
-/*
- * mb862xx.h - Graphic interface for Fujitsu CoralP/Lime
- */
-
-#ifndef _MB862XX_H_
-#define _MB862XX_H_
-
-#define PCI_VENDOR_ID_FUJITSU  0x10CF
-#define PCI_DEVICE_ID_CORAL_P  0x2019
-#define PCI_DEVICE_ID_CORAL_PA 0x201E
-
-#define MB862XX_TYPE_LIME      0x1
-
-#define GC_HOST_BASE           0x01fc0000
-#define GC_DISP_BASE           0x01fd0000
-#define GC_DRAW_BASE           0x01ff0000
-
-/* Host interface registers */
-#define GC_SRST                        0x0000002c
-#define GC_CCF                 0x00000038
-#define GC_CID                 0x000000f0
-#define GC_MMR                 0x0000fffc
-
-/*
- * Display Controller registers
- * _A means the offset is aligned, we use these for boards
- * with 8-/16-bit GDC access not working or buggy.
- */
-#define GC_DCM0                        0x00000000
-#define GC_HTP_A               0x00000004
-#define GC_HTP                 0x00000006
-#define GC_HDB_HDP_A           0x00000008
-#define GC_HDP                 0x00000008
-#define GC_HDB                 0x0000000a
-#define GC_VSW_HSW_HSP_A       0x0000000c
-#define GC_HSP                 0x0000000c
-#define GC_HSW                 0x0000000e
-#define GC_VSW                 0x0000000f
-#define GC_VTR_A               0x00000010
-#define GC_VTR                 0x00000012
-#define GC_VDP_VSP_A           0x00000014
-#define GC_VSP                 0x00000014
-#define GC_VDP                 0x00000016
-#define GC_WY_WX               0x00000018
-#define GC_WH_WW               0x0000001c
-#define GC_L0M                 0x00000020
-#define GC_L0OA0               0x00000024
-#define GC_L0DA0               0x00000028
-#define GC_L0DY_L0DX           0x0000002c
-#define GC_L2M                 0x00000040
-#define GC_L2OA0               0x00000044
-#define GC_L2DA0               0x00000048
-#define GC_L2OA1               0x0000004c
-#define GC_L2DA1               0x00000050
-#define GC_L2DX                        0x00000054
-#define GC_L2DY                        0x00000056
-#define GC_DCM1                        0x00000100
-#define GC_DCM2                        0x00000104
-#define GC_DCM3                        0x00000108
-#define GC_L0EM                        0x00000110
-#define GC_L0WY_L0WX           0x00000114
-#define GC_L0WH_L0WW           0x00000118
-#define GC_L2EM                        0x00000130
-#define GC_L2WX                        0x00000134
-#define GC_L2WY                        0x00000136
-#define GC_L2WW                        0x00000138
-#define GC_L2WH                        0x0000013a
-#define GC_L0PAL0              0x00000400
-
-/* Drawing registers */
-#define GC_CTR                 0x00000400
-#define GC_IFCNT               0x00000408
-#define GC_FBR                 0x00000440
-#define GC_XRES                        0x00000444
-#define GC_CXMIN               0x00000454
-#define GC_CXMAX               0x00000458
-#define GC_CYMIN               0x0000045c
-#define GC_CYMAX               0x00000460
-#define GC_FC                  0x00000480
-#define GC_BC                  0x00000484
-#define GC_FIFO                        0x000004a0
-#define GC_REV                 0x00008084
-#define GC_GEO_FIFO            0x00008400
-
-typedef struct {
-       unsigned int index;
-       unsigned int value;
-} gdc_regs;
-
-int mb862xx_probe(unsigned int addr);
-const gdc_regs *board_get_regs (void);
-unsigned int board_video_init (void);
-void board_backlight_switch(int);
-
-#endif /* _MB862XX_H_ */