]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mmc: Minor cleanup of sdhci.c
authorDarwin Rambo <drambo@broadcom.com>
Thu, 19 Dec 2013 23:13:25 +0000 (15:13 -0800)
committerPantelis Antoniou <panto@antoniou-consulting.com>
Thu, 9 Jan 2014 09:36:56 +0000 (11:36 +0200)
Fixup prints to show where the print is done from, and
a few minor formatting/grammar issues.

Signed-off-by: Darwin Rambo <drambo@broadcom.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
drivers/mmc/sdhci.c

index 46ae9cb52d9cfb45781080c04b9ec84a27d6f7e3..1e86b92beec913dc1dc554ac1dcb24d082146591 100644 (file)
@@ -24,7 +24,8 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
        sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
        while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
                if (timeout == 0) {
-                       printf("Reset 0x%x never completed.\n", (int)mask);
+                       printf("%s: Reset 0x%x never completed.\n",
+                              __func__, (int)mask);
                        return;
                }
                timeout--;
@@ -79,7 +80,8 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
        do {
                stat = sdhci_readl(host, SDHCI_INT_STATUS);
                if (stat & SDHCI_INT_ERROR) {
-                       printf("Error detected in status(0x%X)!\n", stat);
+                       printf("%s: Error detected in status(0x%X)!\n",
+                              __func__, stat);
                        return -1;
                }
                if (stat & rdy) {
@@ -102,7 +104,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
                if (timeout-- > 0)
                        udelay(10);
                else {
-                       printf("Transfer data timeout\n");
+                       printf("%s: Transfer data timeout\n", __func__);
                        return -1;
                }
        } while (!(stat & SDHCI_INT_DATA_END));
@@ -147,7 +149,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 
        while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
                if (time >= cmd_timeout) {
-                       printf("MMC: %d busy ", mmc_dev);
+                       printf("%s: MMC: %d busy ", __func__, mmc_dev);
                        if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
                                cmd_timeout += cmd_timeout;
                                printf("timeout increasing to: %u ms.\n",
@@ -179,7 +181,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
        if (data)
                flags |= SDHCI_CMD_DATA;
 
-       /*Set Transfer mode regarding to data flag*/
+       /* Set Transfer mode regarding to data flag */
        if (data != 0) {
                sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
                mode = SDHCI_TRNS_BLK_CNT_EN;
@@ -230,7 +232,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
                if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
                        return 0;
                else {
-                       printf("Timeout for status update!\n");
+                       printf("%s: Timeout for status update!\n", __func__);
                        return TIMEOUT;
                }
        }
@@ -307,7 +309,8 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
        while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
                & SDHCI_CLOCK_INT_STABLE)) {
                if (timeout == 0) {
-                       printf("Internal clock never stabilised.\n");
+                       printf("%s: Internal clock never stabilised.\n",
+                              __func__);
                        return -1;
                }
                timeout--;
@@ -397,7 +400,8 @@ int sdhci_init(struct mmc *mmc)
        if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
                aligned_buffer = memalign(8, 512*1024);
                if (!aligned_buffer) {
-                       printf("Aligned buffer alloc failed!!!");
+                       printf("%s: Aligned buffer alloc failed!!!\n",
+                              __func__);
                        return -1;
                }
        }
@@ -418,8 +422,8 @@ int sdhci_init(struct mmc *mmc)
        }
 
        /* Enable only interrupts served by the SD controller */
-       sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK
-                    SDHCI_INT_ENABLE);
+       sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+                    SDHCI_INT_ENABLE);
        /* Mask all sdhci interrupt sources */
        sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
 
@@ -433,7 +437,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 
        mmc = malloc(sizeof(struct mmc));
        if (!mmc) {
-               printf("mmc malloc fail!\n");
+               printf("%s: mmc malloc fail!\n", __func__);
                return -1;
        }
 
@@ -450,7 +454,8 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
        caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 #ifdef CONFIG_MMC_SDMA
        if (!(caps & SDHCI_CAN_DO_SDMA)) {
-               printf("Your controller don't support sdma!!\n");
+               printf("%s: Your controller doesn't support SDMA!!\n",
+                      __func__);
                return -1;
        }
 #endif
@@ -467,7 +472,8 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
                mmc->f_max *= 1000000;
        }
        if (mmc->f_max == 0) {
-               printf("Hardware doesn't specify base clock frequency\n");
+               printf("%s: Hardware doesn't specify base clock frequency\n",
+                      __func__);
                return -1;
        }
        if (min_clk)