--- /dev/null
+/*
+ * TI QSPI driver
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/omap.h>
+#include <malloc.h>
+#include <spi.h>
+
+/* ti qpsi register bit masks */
+#define QSPI_TIMEOUT 2000000
+#define QSPI_FCLK 192000000
+/* clock control */
+#define QSPI_CLK_EN (1 << 31)
+#define QSPI_CLK_DIV_MAX 0xffff
+/* command */
+#define QSPI_EN_CS(n) (n << 28)
+#define QSPI_WLEN(n) ((n-1) << 19)
+#define QSPI_3_PIN (1 << 18)
+#define QSPI_RD_SNGL (1 << 16)
+#define QSPI_WR_SNGL (2 << 16)
+#define QSPI_INVAL (4 << 16)
+#define QSPI_RD_QUAD (7 << 16)
+/* device control */
+#define QSPI_DD(m, n) (m << (3 + n*8))
+#define QSPI_CKPHA(n) (1 << (2 + n*8))
+#define QSPI_CSPOL(n) (1 << (1 + n*8))
+#define QSPI_CKPOL(n) (1 << (n*8))
+/* status */
+#define QSPI_WC (1 << 1)
+#define QSPI_BUSY (1 << 0)
+#define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY)
+#define QSPI_XFER_DONE QSPI_WC
+#define MM_SWITCH 0x01
+#define MEM_CS 0x100
+#define MEM_CS_UNSELECT 0xfffff0ff
+#define MMAP_START_ADDR 0x5c000000
+#define CORE_CTRL_IO 0x4a002558
+
+#define QSPI_CMD_READ (0x3 << 0)
+#define QSPI_CMD_READ_QUAD (0x6b << 0)
+#define QSPI_CMD_READ_FAST (0x0b << 0)
+#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8)
+#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
+#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
+#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
+#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
+#define QSPI_CMD_WRITE (0x2 << 16)
+#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
+
+/* ti qspi register set */
+struct ti_qspi_regs {
+ u32 pid;
+ u32 pad0[3];
+ u32 sysconfig;
+ u32 pad1[3];
+ u32 int_stat_raw;
+ u32 int_stat_en;
+ u32 int_en_set;
+ u32 int_en_ctlr;
+ u32 intc_eoi;
+ u32 pad2[3];
+ u32 clk_ctrl;
+ u32 dc;
+ u32 cmd;
+ u32 status;
+ u32 data;
+ u32 setup0;
+ u32 setup1;
+ u32 setup2;
+ u32 setup3;
+ u32 memswitch;
+ u32 data1;
+ u32 data2;
+ u32 data3;
+};
+
+/* ti qspi slave */
+struct ti_qspi_slave {
+ struct spi_slave slave;
+ struct ti_qspi_regs *base;
+ unsigned int mode;
+ u32 cmd;
+ u32 dc;
+};
+
+static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct ti_qspi_slave, slave);
+}
+
+static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
+{
+ struct spi_slave *slave = &qslave->slave;
+ u32 memval = 0;
+
+ slave->memory_map = (void *)MMAP_START_ADDR;
+
+ memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
+ QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
+ QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
+ QSPI_NUM_DUMMY_BITS;
+
+ writel(memval, &qslave->base->setup0);
+}
+
+static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ uint clk_div;
+
+ debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
+
+ if (!hz)
+ clk_div = 0;
+ else
+ clk_div = (QSPI_FCLK / hz) - 1;
+
+ /* disable SCLK */
+ writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN,
+ &qslave->base->clk_ctrl);
+
+ /* assign clk_div values */
+ if (clk_div < 0)
+ clk_div = 0;
+ else if (clk_div > QSPI_CLK_DIV_MAX)
+ clk_div = QSPI_CLK_DIV_MAX;
+
+ /* enable SCLK */
+ writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ /* CS handled in xfer */
+ return;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
+
+ writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd);
+}
+
+void spi_init(void)
+{
+ /* nothing to do */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct ti_qspi_slave *qslave;
+
+ qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
+ if (!qslave) {
+ printf("SPI_error: Fail to allocate ti_qspi_slave\n");
+ return NULL;
+ }
+
+ qslave->base = (struct ti_qspi_regs *)QSPI_BASE;
+ qslave->mode = mode;
+
+ ti_spi_set_speed(&qslave->slave, max_hz);
+
+#ifdef CONFIG_TI_SPI_MMAP
+ ti_spi_setup_spi_register(qslave);
+#endif
+
+ return &qslave->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ free(qslave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
+
+ qslave->dc = 0;
+ if (qslave->mode & SPI_CPHA)
+ qslave->dc |= QSPI_CKPHA(slave->cs);
+ if (qslave->mode & SPI_CPOL)
+ qslave->dc |= QSPI_CKPOL(slave->cs);
+ if (qslave->mode & SPI_CS_HIGH)
+ qslave->dc |= QSPI_CSPOL(slave->cs);
+
+ writel(qslave->dc, &qslave->base->dc);
+ writel(0, &qslave->base->cmd);
+ writel(0, &qslave->base->data);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
+
+ writel(0, &qslave->base->dc);
+ writel(0, &qslave->base->cmd);
+ writel(0, &qslave->base->data);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ uint words = bitlen >> 3; /* fixed 8-bit word length */
+ const uchar *txp = dout;
+ uchar *rxp = din;
+ uint status;
+ int timeout, val;
+
+ debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n",
+ slave->bus, slave->cs, bitlen, words, flags);
+
+ /* Setup mmap flags */
+ if (flags & SPI_XFER_MMAP) {
+ writel(MM_SWITCH, &qslave->base->memswitch);
+ val = readl(CORE_CTRL_IO);
+ val |= MEM_CS;
+ writel(val, CORE_CTRL_IO);
+ return 0;
+ } else if (flags & SPI_XFER_MMAP_END) {
+ writel(~MM_SWITCH, &qslave->base->memswitch);
+ val = readl(CORE_CTRL_IO);
+ val &= MEM_CS_UNSELECT;
+ writel(val, CORE_CTRL_IO);
+ return 0;
+ }
+
+ if (bitlen == 0)
+ return -1;
+
+ if (bitlen % 8) {
+ debug("spi_xfer: Non byte aligned SPI transfer\n");
+ return -1;
+ }
+
+ /* Setup command reg */
+ qslave->cmd = 0;
+ qslave->cmd |= QSPI_WLEN(8);
+ qslave->cmd |= QSPI_EN_CS(slave->cs);
+ if (flags & SPI_3WIRE)
+ qslave->cmd |= QSPI_3_PIN;
+ qslave->cmd |= 0xfff;
+
+ while (words--) {
+ if (txp) {
+ debug("tx cmd %08x dc %08x data %02x\n",
+ qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
+ writel(*txp++, &qslave->base->data);
+ writel(qslave->cmd | QSPI_WR_SNGL,
+ &qslave->base->cmd);
+ status = readl(&qslave->base->status);
+ timeout = QSPI_TIMEOUT;
+ while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+ if (--timeout < 0) {
+ printf("spi_xfer: TX timeout!\n");
+ return -1;
+ }
+ status = readl(&qslave->base->status);
+ }
+ debug("tx done, status %08x\n", status);
+ }
+ if (rxp) {
+ qslave->cmd |= QSPI_RD_SNGL;
+ debug("rx cmd %08x dc %08x\n",
+ qslave->cmd, qslave->dc);
+ writel(qslave->cmd, &qslave->base->cmd);
+ status = readl(&qslave->base->status);
+ timeout = QSPI_TIMEOUT;
+ while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+ if (--timeout < 0) {
+ printf("spi_xfer: RX timeout!\n");
+ return -1;
+ }
+ status = readl(&qslave->base->status);
+ }
+ *rxp++ = readl(&qslave->base->data);
+ debug("rx done, status %08x, read %02x\n",
+ status, *(rxp-1));
+ }
+ }
+
+ /* Terminate frame */
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
projects / u-boot.git / commitdiff
