For more details refer Chapter 2 - System Boot and section 2.14
(flash header description) of the processor's manual.
-This implementation does not use at the moment the secure boot feature
-of the processor. The image is generated disabling all security fields.
-
Command syntax:
--------------
./tools/mkimage -l <mx u-boot_file>
Example:
BOOT_FROM spi
+ CSF value
+
+ Total size of CSF (Command Sequence File)
+ used for Secure Boot/ High Assurance Boot
+ (HAB).
+
+ Using this command will populate the IVT
+ (Initial Vector Table) CSF pointer and adjust
+ the length fields only. The CSF itself needs
+ to be generated with Freescale tools and
+ 'manually' appended to the u-boot.imx file.
+
+ The CSF is then simply concatenated
+ to the u-boot image, making a signed bootloader,
+ that the processor can verify
+ if the fuses for the keys are burned.
+
+ Further infos how to configure the SOC to verify
+ the bootloader can be found in the "High
+ Assurance Boot Version Application Programming
+ Interface Reference Manual" as part of the
+ Freescale Code Signing Tool, available on the
+ manufacturer's website.
+
+ Example:
+ CSF 0x2000
+
DATA type address value
type: word=4, halfword=2, byte=1
--- /dev/null
+High Assurance Boot (HAB) for i.MX6 CPUs
+
+To authenticate U-Boot only by the CPU there is no code required in
+U-Boot itself. However, the U-Boot image to be programmed into the
+boot media needs to be properly constructed, i.e. it must contain a
+proper Command Sequence File (CSF).
+
+The Initial Vector Table contains a pointer to the CSF. Please see
+doc/README.imximage for how to prepare u-boot.imx.
+
+The CSF itself is being generated by Freescale HAB tools.
+
+mkimage will output additional information about "HAB Blocks"
+which can be used in the Freescale tooling to authenticate U-Boot
+(entries in the CSF file).
+
+Image Type: Freescale IMX Boot Image
+Image Ver: 2 (i.MX53/6 compatible)
+Data Size: 327680 Bytes = 320.00 kB = 0.31 MB
+Load Address: 177ff420
+Entry Point: 17800000
+HAB Blocks: 177ff400 00000000 0004dc00
+ ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
+ | | |
+ | | -------- (1)
+ | |
+ | ------------------- (2)
+ |
+ --------------------------- (3)
+
+(1) Size of area in file u-boot.imx to sign
+ This area should include the IVT, the Boot Data the DCD
+ and U-Boot itself.
+(2) Start of area in u-boot.imx to sign
+(3) Start of area in RAM to authenticate
+
+CONFIG_SECURE_BOOT currently enables only an additional command
+'hab_status' in U-Boot to retrieve the HAB status and events. This
+can be useful while developing and testing HAB.
+
+Commands to generate a signed U-Boot using Freescale HAB tools:
+cst --o U-Boot_CSF.bin < U-Boot.CSF
+objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \
+ U-Boot_CSF.bin U-Boot_CSF_pad.bin
+cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
+
+NOTE: U-Boot_CSF.bin needs to be padded to the value specified in
+the imximage.cfg file.
#include <image.h>
#include "imximage.h"
+#define UNDEFINED 0xFFFFFFFF
+
/*
* Supported commands for configuration file
*/
{CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
{CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", },
{CMD_DATA, "DATA", "Reg Write Data", },
+ {CMD_CSF, "CSF", "Command Sequence File", },
{CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", },
{-1, "", "", },
};
static struct imx_header imximage_header;
static uint32_t imximage_version;
-/* Image Vector Table Offset */
-static uint32_t imximage_ivt_offset;
+/*
+ * Image Vector Table Offset
+ * Initialized to a wrong not 4-bytes aligned address to
+ * check if it is was set by the cfg file.
+ */
+static uint32_t imximage_ivt_offset = UNDEFINED;
+static uint32_t imximage_csf_size = UNDEFINED;
/* Initial Load Region Size */
static uint32_t imximage_init_loadsize;
static set_imx_hdr_t set_imx_hdr;
static uint32_t max_dcd_entries;
static uint32_t *header_size_ptr;
+static uint32_t *csf_ptr;
static uint32_t get_cfg_value(char *token, char *name, int linenr)
{
+ offsetof(imx_header_v2_t, boot_data);
hdr_v2->boot_data.start = entry_point - imximage_init_loadsize;
- /* Security feature are not supported */
fhdr_v2->csf = 0;
+
header_size_ptr = &hdr_v2->boot_data.size;
+ csf_ptr = &fhdr_v2->csf;
}
static void set_hdr_func(struct imx_header *imxhdr)
genimg_print_size(hdr_v2->boot_data.size);
printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr);
printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry);
+ if (fhdr_v2->csf && (imximage_ivt_offset != UNDEFINED) &&
+ (imximage_csf_size != UNDEFINED)) {
+ printf("HAB Blocks: %08x %08x %08x\n",
+ (uint32_t)fhdr_v2->self, 0,
+ hdr_v2->boot_data.size - imximage_ivt_offset -
+ imximage_csf_size);
+ }
}
static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token,
if (unlikely(cmd_ver_first != 1))
cmd_ver_first = 0;
break;
+ case CMD_CSF:
+ if (imximage_version != 2) {
+ fprintf(stderr,
+ "Error: %s[%d] - CSF only supported for VERSION 2(%s)\n",
+ name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ imximage_csf_size = get_cfg_value(token, name, lineno);
+ if (unlikely(cmd_ver_first != 1))
+ cmd_ver_first = 0;
+ break;
}
}
imximage_version = IMXIMAGE_V1;
/* Be able to detect if the cfg file has no BOOT_FROM tag */
imximage_ivt_offset = FLASH_OFFSET_UNDEFINED;
+ imximage_csf_size = 0;
set_hdr_func(imxhdr);
/* Parse dcd configuration file */
* The remaining fraction of a block bytes would not be loaded!
*/
*header_size_ptr = ROUND(sbuf->st_size, 4096);
+
+ if (csf_ptr && imximage_csf_size) {
+ *csf_ptr = params->ep - imximage_init_loadsize +
+ *header_size_ptr;
+ *header_size_ptr += imximage_csf_size;
+ }
}
int imximage_check_params(struct mkimage_params *params)
projects / u-boot.git / commitdiff
